tip cutting的例句大全

It seemed that Zhong-zhi 12 was not suitable for tip cutting in high fertilizer condition and could be done 25 days after initial flowering in average condition.

kg-1缩节胺。中芝12在高肥水条件下不宜打顶，但在一般种植条件下以初花后25d打顶效果好。

In this paper, the tool tip cutting path and the chip thickness computation model are established, with which the characteristics of the cutting path and the chip thickness are studied.

本文首先建立了刀具切削轨迹和切削厚度仿真模型，仿真研究了刀具切削轨迹和切削厚度的特点。

Expansion of Notch-crack Tip in Cutting Brittle Materials

脆硬材料切削加工中的缺口裂纹扩展

Fatigue crack growth under I-III mixed-mode loading Expansion of Notch-crack Tip in Cutting Brittle Materials

基于Ⅰ-Ⅲ复合型疲劳裂纹扩展的研究脆硬材料切削加工中的缺口裂纹扩展

The unlevel white teflon strip which is to protect the tip of cutting blades, please smooth this strip.

可能是压条不平，用一圆柱形物体将压条压平。

To slice, tip the cutting knife up on an angle, to use the far end ( away from you) of the blade.

对于切片而言，先把刀的一端抬起，成三角形，然后用离你较远的那一段的刀刃来切菜。

The wear mechnisms of coated cutting tools mainly are flank wear and abrasive wear, accompany with adhesive wear, oxidation wear and breakage of the tool tip/ cutting edge.

涂层铣刀磨损方式主要是后刀面磨损和磨粒磨损，伴随着粘接磨损，氧化磨损以及刀尖和刀刃的破损。

To achieve machining characteristics of brittle materials on the nanometer scale using an AFM diamond tip as the cutting tool, scratching tests and machining tests were carried out on the surface of monocrystal silicon based on AFM.

为获得AFM金刚石微探针在纳米尺度上加工脆性材料的加工特性，在AFM系统上对单晶硅表面进行了刻划、加工实验。

The paper describes the good characteristic of Al2O3-TiC composite ( AG2 ceramic) tips and makes a comparison between the said tip and cemented carbide tip for cutting unworkable materials.

介绍了Al2O3－TiC复合陶瓷（即AG2陶瓷）刀片的优良特性，并在切削难加工材料方面，将其与硬质合金刀片进行了效果分析对比。

The cutting ends each have a cutting tip at a distal end, a body portion, a recess in the body portion and a retainer positioned in the recess.

每个切削端都具有在其末端的切削头，主体部分，主体部分中的凹口以及定位于凹口中的套圈。

He put the tip of the blade into Gus's shirt and then made an arc with his arm, as though cutting a circle.

他把尖刀伸进格斯的衬衫，随手用胳膊划了个弧圈，仿佛要圆圆地剐下一块肉来。

The experiment of high cutting bottom leaf and double tip pruning was carried out in five counties of shangluo city to optimize configuration, exterminate the unwell sell grade and improve quality of tobacco leaves.

为了优化烟叶等级结构，把不适销等级烟叶消灭在田间，达到提高烟叶质量的目的，在商洛市5县安排了高打脚叶与二次打顶技术试验与应用。

The result indicated that: cutting bottom leaves to higher place and double tip pruning leaves can improve quality and optimize configuration of tobacco leaves.

结果表明高打脚叶与二次打顶后，烟叶质量提高，等级结构优化。

This paper analyses that tip angle of drill bit influences on cutting capability and life of twist drill, when the material and shape of work piece is different.

分析了工件材料、形状不同时，钻尖顶角的大小对麻花钻切削性能及寿命的影响，介绍了麻花钻的钻尖顶角的选择。

The author apply ultrasonic vibration to the turning of thin-wall pieces to reduce the deformation, and an tools-tip height adjustment mechanism adapted to the vibration cutting system was developed.

作者将超声振动引入薄壁镜筒零件车削中以减少零件变形，并开发出了适用于振动切削系统的刀尖高度调节机构，最后给出了超声切削和普通切削的对比数据。

An implement for cutting the tip off of a cigar.

切割香烟末端的工具。

The measurement technology is based on a novel fine touch sensor which enables the cutting tool tip itself to be used as the contact probe to implement workpiece inspection.

该系统采用新型触发式传感器，可使刀具刀尖自身作为测头测试工件加工尺寸。