toe stress的例句大全

The floodgate may be regarded as a series system with four main failures modes including slip along the foundation, compression failure of the floodgate toe in the downstream line, tension crack of the floodgate heel in the upper stream and non-uniform stress distributions.

软基上的水闸可看成由4种主要失效模式（沿闸基面的滑动、下游闸趾压坏、上游闸踵拉裂和上下游应力不均匀）所组成的串联体系。

The results show that the four failure modes were ranked from highest to lowest effect: slip along the foundation, non-uniform distributions of stress, tension crack of the floodgate heel in the upper stream and compression failure of the floodgate toe in the downstream line.

由计算结果看出，水闸闸室沿闸基面滑动为水闸的最主要失效模式，上下游应力不均匀、上游闸踵拉裂、下游闸趾压坏为次要失效模式。

Examples show that with consideration of differences of mechanical properties in shear sliding section, maximum dangerous slide face by method of limit equilibrium will degenerate into vice dangerous slide face; and stepping slope face will dissipate stress concentration at the toe of slope.

实例表明，在考虑剪滑段力学性质差异的情况下，通过极限平衡法搜索的最危险滑动面退化为次危险滑动面，且坡面分阶对坡脚应力集中的消散作用。

Weld toe UIT can reduce the residual stress of the toe and the weld.

焊趾冲击不但使焊趾表面产生压应力，也降低了焊缝的残余应力。

This paper studied how to attain the distribution regulation of welding residual stress of butt joint of plate after weld toe was TIG remelted and intense cooled by finite element method. It includes residual stress distribution after welded and weld toe TIG remelting.

本文主要研究如何应用有限元法分析平板对接的焊趾TIG重熔层激冷处理对焊趾表面残余应力分布的影响规律，包括焊态和焊趾TIG重熔的残余应力的分布。

combined with conventional liquefaction estimation and shear stress contrast method to get the shallow tailings dam liquefaction easy under 8 degrees of earthquake. liquefied area mainly concentrated in the bank below the water surface and the downstream slope toe.

结合常规的现场液化判别和剪应力对比法得出8度地震作用下坝体浅层尾矿砂易于液化，液化区主要集中在库内水面线以下和下游坝坡坡脚处。