tool angle的例句大全

Analyzing the elements relations among tangential force Fx, normal force Fy and cutting thickness, cutting tool angle, cutter meterial and cutting tool wear etc.

分析切向力Fx和法向力Fy与切削厚度、刀具角度、刀具材料及刀具磨损等因素之间的关系。

It's difficult to analyze tool angle conversion by the traditional method.

具角度换算是一项难度较大的工作.

Effect of the Front Angle of Thread Turning Tool on the Thread Form Angle

螺纹车刀前角对牙型角的影响

This paper changes the three-dimensional problem into the two-dimensional problem by making use of the mapping principle and sets up a simple and accurate method that is used to design the geometric angle of wood cutting tool.

本文应用映象原理，将空间问题平面化，进而形成了一种向量法求解木材切削刀具几何角度的简单精确的方法。

Effect of tool tilt angle on formation and mechanical property of FSW

搅拌头倾角对FSW成形和接头力学性能的影响

Edge Shape Error Analysis and Modification Calculation of the Positive rake angle slotting tool

正前角插齿刀刃形误差分析及修正计算

There is a special way of design of carbon alloy slotting tool which has minus rake angle to increase the ability of resisting the tooth edge collapse.

为提高硬质合金插齿刀的抗崩刃能力，需要采用负前角的特殊设计；

Grinding Gear Cutter Hob on Tool Grinder with Profile Modeling Machining Equipment of Helix Angle

利用螺旋角仿形加工装置在工具磨床上刃磨齿轮滚刀

High frequency movement in precise micro-displacement of the tool is required when boring the hole and the displacement of the tool needs to be changed according to its spindle rotation angle and its axial position in boring process, because the hole has a very complex three-dimensional surface.

非圆曲面孔复杂的三维空间曲面结构，要求在镗削过程中，刀具径向位置随着主轴转角和其轴向位置的变化，做高频响的精密微位移补偿运动。

The workpiece is clamped on the rotating table, and the normal direction of the workpiece at a certain angle with the direction of polishing tool spindle by controlling the angle of precision swing table.

将工件固定在旋转工作台上，然后对摆台的角度进行控制，以此来确保研抛工具主轴方向和工件法线方向成一定角度。

The research result in the paper shows that accurate tool face angle can still be obtained under this circumstance.

研究表明，即使在这种情况下，完全可以求得准确的工具面角；

The slotting tool with isometric profile cylinder hole is designed. The average radius, the rake angle, the relief angle and the space curve of the edge are analyzed and researched.

对插削等距型面孔的插刀进行了设计，对其平均半径、前角、后角、刀刃的空间曲线作了分析和研究。

Second, analysis of the quality of the different historical periods of the same securities market trading system from the vertical angle, through the establishment of the Securities and Exchange system efficiency index is calculated to provide a quantitative analysis tool.

二是从纵向角度，通过建立证券交易制度效率指数，为计算分析不同历史时期同一证券市场证券交易制度的质量提供了定量分析工具。

The main function of the inclinometer is to measure the angle of inclination 、 azimuth and tool face angle.

随钻测斜仪的主要作用是完成井斜角、方位角、工具面角等参数的测量。

Angle information is an important parameter in the radar antennas, gun control of military and CNC machine tool industry control area.

在雷达天线、火炮控制军事与数控机床工业控制领域中，角度信息是一个重要的参数。

Discussion about the Problems of Rotation Error of Boring Machine Spindle and the Selection of the Best Mounting Angle of Boring Tool

镗床主轴回转误差与镗刀安装角

The effect of relevant process parameters, namely tool radius, sheet thickness, step size, wall angle, yield stress and hardening exponent, upon their intensity was statistically analyzed.

对工具头半径、板厚、加工步长、成形角、屈服应力和加工硬化指数等参数对成形缺陷的影响程度做了计算。

FEA revealed that the decrease in bulge height with increase in wall angle and decrease in sheet thickness is due to localization of von-mises stresses around the tool.

有限元分析结果表明，上凸高度随成形角的增加而减小、随板厚的减小而减小是应归因于工具头周围的Von-Mises应力分布。

In order to avoid such a failure, an empirical model in terms of four process parameters, namely sheet thickness, step size, wall angle and yield stress, was developed to compute the minimum safe limit of tool radius.

为了避免这种失效，本论文中提出了一个以板厚、加工步长、成形角和屈服应力为变量的经验公式，以计算工具头半径的最小值。

FEA explained that the increase in wall formation with increase in wall angle is because of increase in contact pressure and compressive stresses along tool axis.

有限元分析结果表明，挤出飞边现象的加剧是由于工具头轴向上的接触力和压应力增加造成的。