tooth face的例句大全

To Analyze and Adjust Tooth Face Contact for Spiral Bevel Gear Using Error Method

用误差法进行螺伞齿轮齿面接触分析调整

contact fatigue strength of marine gear tooth face

船用齿轮齿面接触疲劳强度的研究

tooth face equation of toothed wheel is established on the basis of vector rotary.

根据矢量的回转方法建立左右旋产形轮的齿面方程；

the active design technique of hypoid gear tooth face provides a kind of fresh method of the hypoid gear design.

准双曲面齿轮齿面主动设计技术为准双曲面齿轮副的设计提供了一种全新的思路。

it is completed that the study of the active design method of nurbs tooth face, the way of tooth face expression and design is provided.

完成了齿面NURBS表示情况下的数字化共扼齿面的主动设计方法研究，为准双曲面齿轮的齿面表示及设计提供了新途径。

Based on a brief introduction of the transmission theory, structure and conjugating profile of a new kind of spatial cam sliding tooth transmission, the self-lock condition of the transmission mechanism consisted of spherical cycloid face tooth-output frame-steel ball-input cam is discussed.

介绍新型空间凸轮活齿传动原理、结构及共轭齿形，讨论球面摆线端齿输出架钢球输入凸轮构成的传动机构的自锁条件。

In addition, the tooth profile of spiral bevel gear is spherical involute and the tooth surface is irregular space curved face which make it difficult to establish the accurate 3D models. The simulation analysis of meshing and optimization design of spiral bevel gears is greatly hindered.

同时弧齿锥齿轮齿廓形状为复杂的球面渐开线，齿面也为不规则的空间曲面，三维几何精确建模较为困难，导致其啮合仿真分析以及局部优化设计的相关研究工作难以开展和深入。

According to the characters of the new spatial cam sliding tooth precision transmission, applying the single factor method, the device's transmission error is analyzed respectively while the input cam, the sliding tooth frame and the face tooth have manufacturing error.

根据新型空间凸轮活齿精密传动装置的传动特点，采用单因素法，分别对输入凸轮、活齿架、端齿等存在制造误差时的传动误差进行了分析。

After tooth profile modification, the lubrication situation in the gear sur-face is made better and EHL performance is improved.

结果表明：通过修形，可以改善齿面的润滑状况，提高齿轮的弹流性能。

This paper researches modeling and meshing analysis about face gear drives composed of a face gear and a spur involute pinion, which covered digital tooth surface, simulation, meshing and finite analysis.

文中以和直齿圆柱齿轮啮合的面齿轮为研究对象，研究内容包括了模型生成和啮合分析，主要涉及面齿轮数值齿面生成、面齿轮加工仿真、啮合分析和有限元分析。

The tooth profile precision of carbon alloy slotting tool with cone rake face is analyzed, the carbon alloy slotting tool with convex rake face is put forward and compared with the slotting tool with cone rake face.

分析了锥形前刀面硬质合金插齿刀齿形误差，提出一种凸曲前刀面硬质合金插齿刀并对二者的齿形精度进行了比较。

Carries through the meshing experiment of many pairs of teeth and the pre-alarm experiment of tooth-face crack damage with the crown gear coupling by use of the special experiment rig of the crown gear coupling designed selves.

利用自行设计的鼓形齿联轴器专用台架实验装置，进行了鼓形齿联轴器多齿啮合实验和齿面裂纹破坏预警实验。

Medical Treatment Experience of Decayed Tooth at Root Face

根面龋的治疗体会

The bottom face of each tooth edge is processed with an inclined swallow-tailed groove combined with each tooth root or a stepped inclined swallow-tailed groove.

每个齿刃的底面加工有与齿根组合的斜燕尾状凹槽，或者是阶梯式斜燕尾状的凹槽。

Study on Tooth Surface Curvature for Orthogonal Face-Gear Drives

正交面齿轮传动中齿面曲率研究

The cutter wings are provided with torsional angles, and the cutting edges of the cutter wings are of single-faced or double-faced arc shapes, tooth shapes or line shapes;

所述的刀翼设置有扭角，刀翼的刃口为单面或双面设置的弧形、齿形或线形；

Face width: the width of the tooth measured axially.

齿宽 --- 沿齿轮轴线方向测得的齿轮的宽度.

plasticating system: frequency variable motor, hard tooth-face speed reducer and high quality nitrified feed cylinder screw.

塑化系统：变频调速电机。，硬齿面减速箱加优质氮化料筒罗杆。

I wash the face to brush the tooth, exited to play.

我洗完脸刷完牙, 就出去玩了.

Can long wisdom tooth affect a face model?

长智慧牙会不会影响脸型?