transfer bed的例句大全

Experiments of hydrodynamics and mass transfer showed that rotating zigzag high-gravity bed had good turndown ratio.

冷模和热模实验结果表明，折流式超重力场旋转床有良好的操作弹性。

Measurement of gas-liquid phase mass transfer coefficients in trickle bed reactor

滴流床反应器中气液传质系数的测定

Through numerical simulations, effects of the adsorbent bed configuration, thermal conductivity and permeability of the adsorbent are analyzed. Some technologies of heat transfer intensification are revalued. 7.

通过吸附床内传热传质的数值模拟，分析了吸附床结构、吸附剂的传热系数和透过度对系统性能的影响，一些有关吸附床的强化传热技术被重新评价。

this paper discusses grain's heat transfer in the axisymmetric propellant packed bed with finite length and multi-layer wall, uses thermocouples to measure the temperature of grains.

该文研究了多层壁面有限长轴对称火药颗粒床中药粒的传热过程，采用热电偶对药粒的温度场进行实验测定。

Mass-transfer analysis of liquids in the voids of rotating packed bed

旋转床填料空间液体的液相传质分析

Enhancement of vertical tube heat transfer to non-fluidized moving bed in return leg of circulating fluidized bed

循环床非流化回料管内竖管传热的强化

By choosing parameters of biomass gas produced by fixed-bed downdraft gasifier, according to the principle of heat transfer and conservation of mass, this paper optimized the design of the biomass gas cleaning device.

选择固定床下吸式气化炉产生的秸秆燃气为参数，根据传热学及质量守衡原理，优化设计出了秸秆燃气净化装置。

Research on the heat and mass transfer in the pyrolysis process of the biomass fuel bed under radiant heating

辐射加热条件下生物质燃料层热解过程的传热传质

He effective thermal conductivity ( K_e) in a metal hydride bed is an important parameter in the enhancement of heat transfer in the bed and in the optimum design of hydride reactors.

金属氢化物床的有效导热系数是研究强化金属氢化物传热、优化设计金属氢化物反应器的重要参数。

Simulation of heat transfer and pressure drop of metal structured packed bed

结构化金属填充床传递特性的数值模拟

Modeling and simulation based on computational fluid dynamics and heat transfer for the metal structured packed bed were carried out to predict the flow field and temperature field, and to evaluate its performance in heat transfer and hydrodynamics.

运用计算流体力学（CFD）与计算传热（CHT）方法，对结构化金属填充床内的流体动力学和传热特性进行了详细的模拟，以预测其流场和温度场。

Furthermore, the comparison between the simulation results of the metal structured packed bed and heat transfer performance and pressure drop of the pellet packed bed was made, which validated better transport performance of the metal structured packed bed.

进一步将模拟结果与传统颗粒填充床的压降与传热特性进行对照，从而推断结构化金属填充床具有很好的传递性能。

Study on Performance of Hydrodynamics and Mass Transfer of Zigzag Rotating Bed

折流式旋转床流体力学性能和传质性能研究

An Investigation of the Heat Transfer Coefficient Distribution over a Spherical Fuel Element for a Pebble Bed Reactor

高温气冷堆球床模拟研究球床堆燃料元件球放热分布研究

Heat and Mass Transfer Simulation of SBR Dryness in the Deep Bed

丁苯橡胶深床干燥的传热传质模拟

Estimation of Heat Transfer Parameters in Packed Bed by Using Orthogonal Collocation

用正交配置技术估计固定床内的传热参数

Gas-liquid mass transfer efficiency tests with tap water and varied volume fraction of suspension carrier at varying intensity of aeration in a moving bed biofilm reactor ( MBBR) were carried out.

采用移动床生物膜反应器，利用清水进行了在不同悬浮填料体积含率和曝气强度时反应器内气液传质性能研究。

The synergy of the gravitational field with the other fields influences the mass transfer, heat transfer and affinity adsorption in the tapered bed, and the transfer directions depend upon the synergy results.

上流锥形床亲和层析在多场协同下，其传质、传热以及吸附反应相互影响，过程的最终传递方向将取决于各场之间综合作用的结果。

an experimental investigation on heat transfer characteristics at different temperature particles in gas-solid fluidization bed

气固流化床加料区传热特性的实验研究

membrane wall heat transfer in a circulating fluidized bed and its modeling

循环流化床膜式壁传热试验与模型