transfer contact的例句大全

Do not transfer contact lens solutions into smaller travel size containers.

不要将隐形眼镜的护理液倒入小一些的旅行装容器。

And further the effects of Knudsen number, Prandtl number, thermal conductivity, thermal accommodation coefficient and gas pressure on the gas gap conductance are discussed, which provides the quantitatively theoretical solutions to the interfacial gap gas heat transfer in the real contact conditions.

并对影响接触界面间隙热导的克努森数、普朗特数、热导率、适应系数、压力等参数进行了分析，为实际情况下接触界面的传热提供了理论基础。

Heat transfer within the substrate is by conduction alone. Thermal contact resistance at the droplet-substrate interface is included in the model.

数值模拟中对基体内部只考虑热传导作用，并且引入了液滴-基体界面处的接触热阻这一参数。

Based on the theories of gear engagement, contact analysis, friction and heat transfer, a model and method of finite element structure and thermal analysis for the drive were established.

基于齿轮啮合原理、轮齿接触分析、摩擦学和传热学，并将有限元方法、理论分析计算以及实验测量数据相结合，建立了塑料蜗轮与钢制蜗杆传动轮齿结构和温度分析的模型与方法；

An experimental study of heat transfer characteristic on direct contact thermal storage system

直接接触式蓄冷传热特性的试验研究

The addition of PEO into POM/ PTFE fiber composites could enhance the formation of transfer film on the mating surfaces during sliding contact, and thus further improved the friction and wear performance.

当PEO加入到POM/PTFE纤维复合材料中时，能够加强对偶面的转移膜的形成，从而进一步改善了材料的摩擦和磨损行为。

That is larger far than gravity makes gas-liquid contact turbulently in the rotating bed, which intensifies mass-transfer process and improves mass-transfer efficiency.

它利用旋转产生的远大于重力的离心力，使气液在高度湍流下接触，强化传质过程，提高传质效率。

The characteristic of this model is to taking the effect of vapor condenses in air gap and membrane contact with cooling plate on heat and mass transfer into consideration.

所建立的传热传质模型，其特点是考虑空气隙内蒸汽冷凝及膜面与冷壁部分接触对传热传质的影响。

Please make sure that you contact the bank so that after the transfer you can send some money from that money for me to prepare my traveling documents to meet with you in your country.

请确保您联系银行，以便移交后，您可以从一些钱，钱对我来说，我准备旅行证件和各位见面，在您的国家。

The wear mechanism of cast iron-spraying molybdenum is that the transfer particles come into being in contact surface. The transfer particles plough grooves and cracks on the surface after work hardening. The embedded particles tear the surface and become grooves after adhesive.

铸铁-喷钼配对副的磨损机理为先在接触表面产生转移粒子，加工硬化后在表面犁耕出犁沟和裂纹，同时镶嵌进磨损表面的粒子与基体黏着，撕裂后使表面形成犁沟。

Effect of atmospheric pressure on heat transfer by contact between two plates under laser irradiation

大气压力对激光辐照双层板接触传热的影响

During the closing/ opening of vacuum circuit breaker, arc contact is first closed and post breaking, however, main contact is post closed and first breaking. So there must be the current transfer process.

当断路器在（合闸-分闸）动作过程中，弧触头先合后分，而主触头后合先分。因此，新型大电流真空断路器开断时主、弧触头之间必然存在电流转移过程。

Based on three-dimensional fractal theory, the heat-conduction contact model of rough surfaces was set up and the law of heat transfer between the sliding surfaces was studied.

基于三维分形理论建立了粗糙表面接触热传导模型，并对其摩擦滑动界面的传热规律进行了研究。

Studies on Nitroxides ( XXI)& Contact Charge Transfer Complexes of Piperidine Nitroxides with Halomethanes and Their Photo induced Reaction

氮氧自由基研究（ⅩⅫ）&哌啶氮氧自由基与卤代甲烷的接触电荷转移络合物及其光诱导的反应

In the overcracking operation caused by long contact time, the thermal cracking reaction increases and the hydrogen transfer and the isomerization reaction appear the same tendency as thermal cracking reaction.

在由反应温度、剂油比和停留时间引起的过裂化点前后，热裂化、氢转移和异构化反应表现出各自的变化特点。

Condensing Gas-fired Boiler with Direct Contact Heat Transfer Based on Air Wetting

基于空气加湿的直接接触换热冷凝式燃气锅炉

Contactless inductively coupled power transfer ( ICPT) technology overcomes the wear and tear electric spark and poor contact of traditional power transfer method. It makes the power supply system more secure, reliable, flexible, and eco-friendly, and has broad application prospects.

非接触感应耦合电能传输系统（ICPT）克服了传统供电方式所产生的电火花、磨损及接触不良等缺陷，使供电系统更加安全、可靠、灵活、环保，其具有广阔的应用前景。

Because the glass fibers scratched the ball surfaces and accelerated the spalling of the transfer films from the ball surfaces, the bearing experienced failure in the absence of stable lubrication at the contact surfaces between the balls and raceways.

保持架中玻璃纤维划伤轴承球表面并加速转移膜剥落，使轴承不能获得稳定润滑，从而导致轴承在球与套圈滚道接触表面处失效。

In the course of friction and wear, the debris produced by M-UHMWPE and LLDPE transfer to the worn surface exits in the contact surface, which act as anti-friction and wear-resisting agent.

在摩擦过程四川大学褚项I学位论文中，M一UHMwPE和LLDPE向磨擦界面转移产生的磨屑分布于摩擦界面，起到了减摩耐磨剂的作用。

Conclusion 1.The total contact areas in three type stems are small, and the contact areas about the proximal medial and distal lateral regions where were the stress focus were greater, which were advantageous to the load transfer.

结论①三种假体的总接触面积均较低，而应力集中的近段内侧和远段外侧接触面积高，有利于负荷向骨的转移。