tube side的例句大全

Internal expansion joint shall be adopted to single tube side float head heat exchanger for avoiding from large temperature difference stress, when design pressure on shell side is larger.

设计单管程浮头式换热器时，为避免较大的温差应力，在壳程设计压力较大的状况下，常采用内置膨胀节的形式。

Provide steam rings for tube side inlet and outlet flanges.

管程的入口与出口法兰配备蒸汽环.

The tube side of exchanger mostly consists of copper brass tubes.

通常这些热交换器都以铜管为冷却水通路.

the calculation method for bolt pretightening force of tube side gasket and shell side gasket were proposed.

给出了管程和壳程垫片螺栓预紧力的计算方法。

Then lay the tube in place so that one end rests all the way in the cup and the rest of the line runs up — and out — the side of the hole ．

然后把管子放在适当的位置,这样一端就一直放在杯子里,剩下的线就沿着洞的一边向上延伸。

The little flower itself is a narrow tube, one side of which grows out into a long yellow ribbon.

小花本身呈狭窄的管状结构，其中一侧发育成为长长的黄色带状物。

The nozzle ( 52) of a syringe ( 50) is inserted into a recessed part ( 122) formed at the tip part ( 121) of the side filling tube part and a saline is filled therein for flushing.

在形成于侧注管部的前端部（121）上的凹部（122）中插入注射器（50）的喷嘴（52）并注入生理盐水，从而进行冲洗。

Because there were roof collapses at several places along the lava tube that formed Indian Tunnel, it is possible to enter on one end and come out the other side.

因为有沿熔岩隧道管，形成了印度一些地方的屋顶坍塌，有可能进入一端出来的另一面。

Analysis of overlap height of tail tube in side track well

侧钻水平井尾管搭接高度分析

The aim of this study is to examine the possibility of substituting nitrogen and hydrogen mixture for argon to protect the back side during stainless steel tube welding.

本文介绍了采用廉价的氮氢混合气代替昂贵的氩气充入不锈钢管内部作焊缝背面保护气进行焊接的试验研究。

The second, at a distance of pit side line 0.5m, 2.5m, 3.5m, drill three inclinometer hole, cover up the inclinometer tube and use the borehole inclinometer to measure lateral displacement of the foundation pit.

第二、在垂直基坑边线分别为0.5m、2.0m、3.5m钻孔，然后埋入测斜管，利用测斜仪来测量基坑壁的侧向位移。

Re-fit short tube on the left-hand side.

重新安装左侧的短软管。

Experience of One Stage Repair Left-sided Colonic Trauma with Thread Tube for 42 Cases

应用螺纹管Ⅰ期修复左半结肠损伤42例

Consistent with the NAMUR standard to connect directly installed in the pneumatic actuator side without the tube connection.

符合NAMUR连接标准，直接安装在气动执行器侧面，无需管子连接。

stamens 2, adnate to abaxial side of corolla tube near mouth, slightly exserted;

雄蕊2，贴生于花冠筒接近口部，稍外露的背面的边；

Effect of variable electrode force on weld formation of sheet to tube joining with single-sided spot welding Dynamical phase transition and ferroelectric properties of poly ( vinylidene fluoride) in electric poling

变电极力对管板单面电阻点焊形核的影响聚偏氟乙烯电极化的动力学相变和铁电性

Analysis of Stability of Thick-Wall Stainless-steel Tube Plasticized in One Side

厚壁不锈钢管受压柱单侧出现塑性时的稳定分析

stamens 2, adnate to abaxial side of corolla tube near or above middle, included;

雄蕊2，贴生于在或在上部中间附近的花冠筒的背面面，包括；

stamens 2, adnate to abaxial side of corolla tube below middle, included;

雄蕊2，贴生于花冠筒中间以下的背面的边，包括；

stamens 2, adnate to abaxial side of corolla tube above middle, exserted;

雄蕊2，贴生于花冠筒在中部以上的背面的边，外露；