ultrasonic process的例句大全

In making condition, the ultrasonic process was needed, with the boiling temperature 60 ℃.

在制备中超声粉碎是需要的，热处理温度以60℃为宜。

Discussion on extraction of planar contour from ultrasonic image and rebuilding process of three-dimensional image

超声图像的表面轮廓提取及三维图像重建过程的探讨

Considering the stability of the ultrasonic data and in order to detect the zero-velocity moment easily, locally weighted scatterplot smoothing algorithm is used to process ultrasound data, which makes it to show the patterns and the trends of motion model more specifically on the whole.

考虑到超声数据的稳定性，使用局部加权回归散点平滑法处理超声波数据，使其整体能够更加具体的显示出运动模型的规律和趋势，从而方便检测。

Investigated was the hydrolysis process of titanyl sulfate without adding external seed in ultrasonic wave field. The product of hydrolysis was characterized by XRD, SEM, TEM and EDS.

研究了硫酸氧钛溶液在超声波场中自生晶种的水解过程，并结合XRD，SEM，EDS和TEM等现代测试技术对水解产物进行了表征。

The mechanical shock and thermal impact in the machining process of discontinuous grinding polycrystalline diamond with slotted diamond wheels were investigated systemically by the simulation experiments of ultrasonic vibration and pulse laser heating respectively.

分别采用超声振动冲击和脉冲激光加热技术对开槽金刚石砂轮断续磨削加工聚晶金刚石过程中的机械冲击和热冲击进行了模拟实验研究。

With the action of ultrasonic in the process of the oxygenation reaction, the products were prepared from raw materials of industry byproduct ferrous sulfate and industry grade ammonium bicarbonate.

产品是以硫酸法生产钛白副产物七水硫酸亚铁和工业级的碳铵为原料，通过添加适宜的表面活性剂，调节适宜的pH值，在超声波作用下经沉淀-氧化反应合成。

Study on quality improvement of cephradine reactive crystallization product by ultrasonic seeding process

加晶种提高头孢拉定反应结晶产品质量的研究

Analysis of high-intensity ultrasonic dilution process of XD Composites

原位反应烧结块的高能超声稀释过程分析

Experimental Research on Optimization of Process Parameters in Ultrasonic Vibration Honing

超声振动珩磨工艺参数优化的试验研究

Results showed that ultrasonic of 116~ 800 W could speed hydrating process in the reactor with 19.6 cm 2 area.

结果表明，功率116～800W的超声波可促进面积为19.6cm2反应器中的水合物生成。

Development and Application of Ultrasonic Water Cleaning Process and Automatic Cleaning Line for Bearing Retainers

轴承的超声波水洗工艺与自动清洗线的开发应用

the paper introduced the ultrasonic welding of aluminum alloy and magnesium alloy, and analyzed the features of various process technologies.

本文介绍了铝合金、镁合金的国内外超声波焊接的最新研究现状，分析了各种工艺方案的特点与效果。

The research technique route and tenet is to pick-up characteristic parameters by analyzing relevant ultrasonic echo signals and then found the relation between the structure configuration and evolvement process, till realize UNDE and UNDT of materials finally.

本研究的基本技术路线和宗旨是通过对超声回波信号进行相应的分析，提取模型的特征参数，并与材料的组织形态及其演变过程相关联，最终实现材料的超声无损表征与评价。

Study on Ultrasonic Extraction Process of Tetrahydropalmatine

超声波法提取延胡索乙素工艺的研究

Effect of ultrasonic wave irradiation on hydrolysis of titanyl sulfate solution and crystallization process was discussed preliminarily.

同时，对超声辐照影响硫酸氧钛溶液水解和结晶过程的机理作了初步探讨。

It is a method of controlling the process of crystallizes using ultrasonic energy.

超声结晶是指利用超声波的能量来控制结晶过程的方法，其机理至今不是十分清楚。

Methods By using the ultrasound pulse reflection law, the correlation between the process of thrombosis formation and changes in the ultrasonic velocity was studied quantitatively.

方法采用超声脉冲反射法，着重就血栓形成过程中对其声速变化的相关性进行了定量研究。

Test and Analysis of a Dynamic Contact Process of Ultrasonic Feeding An ultrasonic transmission thickness measurement system for rivulet on the stay cable under rain-wind induced vibration

超声振动输送的物料纵向振动过程测试与分析斜拉索风雨激振水线的超声波测试研究

This thesis adopts ultrasonic technology to process micro-organisms in fluid milk and measure their quality.

本文采用超声波技术对液态奶进行处理，测定其微生物菌数和品质变化。

Ultrasonic signal process method based on instantaneous frequency

基于瞬时频率的超声信号数字处理方法