uniform strain的例句大全

Residual stress analysis in unsymmetrical laminated ceramics by non-uniform strain model

非均匀应变模型分析非对称层状陶瓷的残余应力

The uniform elongation is the characteristic strain of reinforcement steel at maximum force in simple tension test, it is an important indicator to reflect the ductility of reinforcing steel, and directly affects the seismic behavior of structure.

钢筋在拉伸试验中，达到最大作用力时对应的总伸长率为均匀伸长率，它是反映钢筋延性的重要指标，直接关系到结构的抗震性能。

Using the analysis method of shrinkage and creep based on initial strain, This thesis fitted the shrink strain and the creep coefficient function with uniform exponential function model and find a way to get the recursion formulae of shrinkage and creep.

按照初应变法计算收缩徐变的原理，将04规范收缩应变和徐变系数的计算表达式拟合成统一的指数函数，得出收缩徐变递推计算公式。

for each cyclic dynamic stress, the incremental strain is obtained in terms of the first partial derivative of the known formula for the uniform load with respects to the cyclic number.

对每一动应力循环，以已有等幅荷载经验计算公式对循环次数的偏导构造残余应变的增量模型，并考虑了动压应力对残余应变增长的控制作用。

transmission characteristic of the fiber grating f-p cavity acted with uniform radial strain

光纤光栅F-P干涉仪在轴向应变作用下的参量变化

this measurement amplifier with relay outputs works as a uniform voltage amplifier for strain gauge measuring bridges .

这款测量放大器带有继电输出，它像恒定电压放大器那样工作，用于应变测量电桥。

The curve faired by this method tends to possesses smaller strain energy and rather uniform changes in curvatures.

利用这种方法得到的曲线不仅具有较小的应变能，而且曲率变化比较均匀，具有很好的光顺效果。

The optimization preform shape checked by forward operation and the results show that the variation of effective strain trend to uniform, the forming force and the effective stress are decreased. 4 、 The study of multilayer metal die.

通过对优化结果进行检验，可以看出优化后的模型变形更加均匀，使得终锻模的等效应力和成形所需的动力均有所减小。4、多层金属热锻模的研究。

The results found that: ( 1) the transverse corner field resulting from the uneven geometrical width of YBT model leads to the non-uniform spreads and distributions of the active lengthwise tensile stress, the stretchy strain and the passive transverse pressure stress in the principal axis;

由此得出：①YBT模型几何宽度不均匀所形成的横向角部区域，导致了主动型的纵向主轴拉应力和主轴伸长应变以及被动型的横向主轴压应力的不均匀传播与分布；