valve tappet的例句大全

Valve Tappet Adjustment For Three And Five& Cylinder Engines

三缸与五缸内燃机气门间隙调整方法

In this article the Valve tappet adjustment for three and five-cylinder of four-Cycle engines is discussed.

本文论述四冲程三缸内燃机，五缸内燃机气门间隙的调整原理与方法。

The valve tappet guide must be replaced if it displays irregularities deviating from the limit sample photo.

如果气门挺杆导向轴套上有明显偏离极限样本照片的缺陷，则须更换。

industry: pumps, nozzles; fuel injection device; auto parts processing; valve tappet, push, spring;

所属行业：油泵、油嘴；燃油喷射装置；汽摩配件加工；气门挺柱、推杆、弹簧；；

industry: reducer assembly; transmission; valve tappet, push, spring; carburettor; sub-actuator;

所属行业：减速器总成；变速器；气门挺柱、推杆、弹簧；化油器；分动器；；

Formation and Elimination of Porosities and Cracks on the Head Face of Valve Tappet

气门挺杆端面气孔裂纹形成原因分析及其消除措施

It is proposed that there is a quicker valve-opening speed during the lift of the valve with asymmetrical, N-times harmonic wave cam, and an enlarged wrap angle during the buffer, which can effectively increase the lifting range of tappet stem and approve charging;

非对称N次谐波凸轮的气门上升段的气门开启速度可取得较大，并将缓冲段包角增大，可以有效地提高上升段的挺柱升程丰满系数，改善充气性能；

Studies on Two Masses Dynamic Analysis Model Calculation of Hydraulic Tappet Valve Train

液压挺柱配气机构二质量动力学模型计算的研究

Wearing-out of tappet rotation in valve train and its prevention

配气机构中挺杆转动的磨损特性及抗磨对策

Based on the calculation, after using the hydraulic tappet, the valve train not only has less vibration and noises but the cam contact stress has been improved obviously.

经计算，使用了液压挺柱后，不仅振动和噪声减小，而且凸轮与挺柱接触应力也有明显的改善。

On the base of the known stiffness valve and damping value of hydraulic tappet, the dynamic state responds of hydraulic tappet valve train are calculated by means of force analysis of the model.

在已知液压挺柱刚度值和阻尼值的基础上，通过模型受力分析，编程计算出了液压挺柱配气机构的动态响应。

Description : Zhejiang Pingchai Pumps ---- Oil pump , tappet valve guide, rod.

机油泵 、 气门挺杆、气门推杆、气门导管.

The new technology and new structure of model AJR engine applied in Santana 2000 car is introduced, including light valve gear, camshaft, tappet friction pair, timing transmission system, lubricating system and cooling system.

对桑塔纳2000轿车用AJR发动机从以下几个方面：轻型气门机构、凸轮轴和挺杆摩擦副、正时传动系统、润滑系统和冷却系统的新技术、新结构作了概要分析。

Dynamic Distortion of Valve Train of Diesel Engine with the Change of Camshaft Speed and Tappet Clearance

配气机构动变形随转速及气门间隙的变化规律

The tappet clearance is slightly effective to distortion only during the valve lifting period if it changes not much from designed value.

气门间隙在设计值附近变化不大时，仅在气门开启阶段对配气机构动变形稍有影响。

tappet clearance will cause the exhaust valve to open late and close early in cycle and will reduce its maximum lift.

排气阀间隙过大将引起其在一循环中迟开早关并减少其升程。

Tappet oil gallery rising-stem double-disk parallel slide valve

（气门）挺杆润滑油道明杆平行式双闸滑阀