vessel element的例句大全

Isolating the stem secondary xylem of the seedling, the results revealed that its cellular form have wood fiber, septate wood fiber and vessel element, there are two types of perforation plate, simple perforation plate and scalariform perforation plate.

离析实生苗茎次生木质部，发现其细胞组成有木纤维、分隔木纤维和导管分子，导管分子穿孔板有单穿孔板和梯状穿孔板。

No significant differences in tangential and radial width of cambial fusiform cell, length of vessel element, ratio of fiber and ray tissue were found among different stages.

结果表明，形成层纺锤形细胞的径向和弦向宽度在活动期不同阶段差异不显著，而纤维长度、纤维宽度、壁腔比、微纤丝角、导管分布频率和胞壁率差异极显著；

Both ends of the vessel element were scalariform perforation plates;

两端均为梯状穿孔板；

The heat load to the vacuum vessel thermal shield ( VVTS) is analyzed by FLUENT finite element software in order to demonstrate that the design of cooling tubes is reliable.

采取有限元法对内冷屏的受热状况进行了计算分析，以验证内冷屏氦冷却管道设计方案的可靠性。

Stress Analysis of Part of Reaction Vessel with Finite Element Program

反应釜局部结构的有限元应力分析

the finite element analysis on manufacture deformation control for aluminum magnesium alloy vessel with thin wall and large diameter

薄壁大直径铝镁合金容器制造变形控制的有限元分析

Stress Analysis for Tangential Bonded Structure of Pressure Vessel and Pipe Based on Finite Element Method

压力容器与切向接管结构应力三维有限元分析及强度评定

multi-stage reverse osmosis unit includes high-pressure pump, reverse osmosis membrane element, membrane housing ( pressure vessel), frame and so on.

反渗透装置主要包括多级高压泵、反渗透膜元件、膜壳（压力容器）、支架等组成。

Grid Summary Defects of Corrugated Box The Divided Net of Vessel With Cracks by Finite Element Method

含缺陷容器有限元计算时的网格划分

According to the interlayer contact model of the cylinder, a finite element contact analysis model of the end connecting zone of the spherical head and the cylinder of the integrated multilayer-wrapped high pressure vessel has been established.

在筒体层间间隙接触模型分析的基础上，建立了多层筒体与球形封头连接区有限元分析模型。

the finite element analysis on the weld residual stress of the pressure vessel cylinder and plate dome based on ansys

基于ANSYS压力容器筒体与平板封头焊缝残余应力有限元分析

Finite Element Method to Tracing the Fatigue Growth of Surface Crack of Out corner of Cylindrical Pressure Vessel Nozzles

圆筒型容器接管外拐角表面裂纹疲劳扩展的有限元跟踪

A new technique by computer has been used to trace fatigue growth of surface crack of out corner of cylindrical pressure vessel nozzles by using the methods of 1/ 4 displacement and finite element.

运用1/4点位移法和有限元技术对圆筒型容器接管外拐角表面裂纹扩展时应力强度因子的变化作了计算机数值跟踪。

Through finite element numerical calculation and experiment test on pressure vessel containing inner portrait surface crack, the results show that;

通过对一台含内壁纵向表面裂纹的实物压力容器的有限元数值计算和实验测试，结果显示：初始椭圆形表面裂纹在疲劳扩展过程中形状逐渐趋圆并保持圆形继续扩展。

Statical analysis with finite element method is performed to pressurized pressure vessel of titanium alloys.

对型号主体系统中的钛合金气瓶进行有限元静力学分析。

Neutron shielding components design concept and structure features of ITER ( International Thermonuclear Experimental Reactor) vacuum vessel were briefly introduced. Static and thermo-structure coupling analyses were performed based on FEM ( finite element method) software ANSYS, respectively.

根据ITER（International thermonuclear experimental reactor）真空室中子屏蔽组件的设计概念和结构特点，应用有限元分析软件ANSYS对结构组件进行静力学分析和热&结构耦合分析。

Optimization Design of Large High Pressure Vessel Based on Finite Element Analysis

基于有限元分析的大型高压釜优化设计