wall type的例句大全

As a new type of pile, Thin-wall pipe pile using cast-in-situ concrete ( PCC) is of good application prospects.

现浇混凝土薄壁筒桩作为一种新的桩型，具有良好的应用前景。

Survey of naturally radioactive level of some new type wall materials

山东省掺工业废渣新型墙体材料天然放射性水平调查

For box-type reactor complex thin-walled shell structure, the finite element method is used to carry out its strength and displacement analysis.

针对电抗器箱体类的复杂薄壁板壳结构，一般采用有限元法对其进行强度校和以及位移分析。

Preparation of the TL-615 D Type Exterior Wall Coating

TL-615D型建筑外墙涂料的研究与开发

The end face structure of a new type upstream pumping mechanical seal with double seal dams was developed because the solid particles were easily absorbed by the spiral groove type upstream pumping mechanical seal with the grooves on the internal wall to make the particles be damaged.

针对内径开槽的螺旋槽型上游泵送机械密封易于吸入固体颗粒而产生磨粒磨损的缺陷，研制开发出具有内外双密封坝的新型上游泵送机械密封端面结构。

The column type container is made from transparent or non-transparent materials but the external wall is provided with a water level observation window or a water level tube.

柱式容器是透明材料制成，或是用不透明材料制成，但外壁设有水位观察窗或水位管。

A fixing wall in type socket or a wiring plate type socket can be reloaded with different contact parts at any time as required.

本实用新型的使用，改变了以往插座一次到位、难以更改的缺点，使固定入墙式插座或接线板式插座，都可根据需要，随时换装不同类型的接触件。

Analysis of unsteady heat transfer-method of reaction coefficient in new type energy saving wall

新型节能墙体的动态传热反应系数法分析

Analysis of shear wall structures using a type of wall element

用一种墙体单元模型分析剪力墙结构

a repair process study has been conducted to delay the occurrence and propagation of fatigue cracks which are likely to exist in the welded area around the air chamber union on the wall of accumulator fuel tank in a certain-type aircraft to prolong the service life of the tank.

针对某型飞机蓄压油箱气腔管嘴处焊接部位易产生疲劳裂纹的问题，对超期蓄压油箱采用局部修补方案，以便延缓裂纹的产生和扩展，达到延长使用寿命的目的。

A new type of cold saw blade for cutting thin-walled section steel has been designed based on the research about the problems occuring in the spot.

根据工厂的实际需要研究设计出新型薄壁型钢用冷切锯片。

In view of the high energy consumption existing in oxygen lance for 150t shaft-type EAF wall in the steel-making department of ZIS, the ultra-sonic oxygen lance is designed to meet the need of practice, based on the calculation of the thermo balance in the process of steel-making.

珠钢炼钢部150t竖井电炉炉壁氧枪存在氧耗高问题，通过炼钢过程中的热平衡计算，设计出满足实际工况的超音速氧枪。

This paper analyzes the main cylinder wall of SITI-1703 type automatic hydraulic machine and puts forward several repair measures.

对SITI-1703全自动液压机主油缸壁刮伤的原因进行了分析，并提出了修复措施。

The calculation model for tubular radiation recuperator has been established and the thermal transmission characteristics ( preheating temperature of air, temperature of furnace wall and thermal transmission coefficient) of the radiation recuperator for car-type heat treating furnace has been therefore analyzed.

建立了筒状辐射换热器传热计算模型，分析了台车式热处理炉上使用燃气辐射换热器的传热特性（空气预热温度、壁温和传热系数）。

The method of calculating buckling critical load of open section thin-walled bar as the type of curly cross section strip is given. 3.

给出了弯曲截面钢带这种开口薄壁类型杆件的失稳临界力的计算方法。

Reasons of scratching the main cylinder wall of SITI-1703 type automatic machine and repair

SITI-1703全自动液压机主油缸缸壁刮伤的原因分析及修复

The prestressing tendon of three-twist type of tensioned collocated beside grider is adopted in this project to reduce the vertical axis force of the main wall removed at the aim of avoiding affecting the structure's normal use when the main wall is removed.

在梁两侧的三折线型预应力筋上采用张拉配置，可减小需抽除的承重墙中的竖向轴力，最终达到抽墙而不影响结构正常使用的目的。

Development of π type multifunction brick and study on thermal property of its compound wall

π型多功能砖研制及其复合墙体的热性能研究

With consideration of the top displacement, drift of story and micro-strain of longitude steel bars, the equivalent shell wall method has been presented in order to simplify the design of such type structure.

综合结构的顶点位移、层间转角以及钢筋的微应变，提出了适合于该结构体系简化设计的等效剪力墙法。

A new type of decorative composite construction wall was proposed with polymer concrete as base layer and fibre-glass reinforced plastics ( FRP) as protective layer, and resin impregnating layer offers the connection between the two layers.

混合结构墙体裂缝的质量问题分析提出一种新型复合结构墙体，该墙体以聚合物混凝土为基层，以玻璃钢为保护层和装饰层，并由树脂渗透层将以上两层紧密结合起来。