waveguide output的例句大全

to validate this method, a ridge waveguide output circuit was designed and tested.

针对该型速调管的要求，设计了完整的脊波导输出组件并进行验证。

Choosing three cases of Al-content of the waveguide layer and the cladding layer, we calculate and analyze the dependences of the optical confinement factor, maximal output power, vertical divergence angle, and threshold current density on the thickness of the waveguide layer.

选取了三种情况的波导层和限制层的铝组分，分别计算和分析了波导层厚度与激光器光限制因子、最大出光功率、垂直发散角和阈值电流密度的函数关系。

Calculated results show that when the Al-content of the waveguide and cladding layers are 0.4 and 0.5 respectively, a maximal output power of 11.2W, vertical divergence angle of 19 °, and threshold current density of 266A/ cm2 can be achieved by adapting narrow waveguide layers;

根据计算结果可知：当波导层和限制层铝组分为0.4和0.5时，采用窄波导结构可以获得器件的最大输出功率为11.2W，发散角为19°，阈值电流密度为266A/cm2；

Detection and Protection of Arcing Inside the Output Waveguide of the Microwave Tube Transmitter

微波管发射机输出波导打火检测及保护

Input/ output coupling of optical waveguide Iron powder and admixture will be fed onto auxiliary materials stockyard by belt conveyor.

光波导输入－输出耦合铁粉、混合材经破碎系统输送皮带机送入辅助原料堆场。

In this Paper, a method to select transverse mode of a CO2 waveguide laser is reported. By using the waveguide with a big bore and non-matching concave mirror in near field, high output power and fundamental mode laser can be achieved.

本文报道了波导CO2激光器的一种选择横模的方法，该器件采用了大孔径波导和近场非匹配凹面镜，可得较高输出功率的基模激光。

The doubler has been designed by the balanced circuit to achieve wide band frequency multiplying, uses preamplifier to achieve enough microwave power, and achieves the low input power and full waveguide band output.

二倍频器选用平衡倍频电路，并内置微波放大器，实现了低输入功率要求、Ka频段全波段输出；

The multiplier module achieves adjustable power output from 0 to+ 17dBm in Ka-band, but does not fulfills full waveguide band adjustable power output because of the performance of the Ka-band detector.

该倍频链在Ka频段内8个频段实现了输出功率在0-+17dBm范围内可调，由于检波器的性能的原因未能实现整个Ka频段功率可调。

The output characteristics of three-channel waveguide arrays CO_2 laser

一维三通道波导列阵CO2激光器输出特性研究

We designed tapered waveguides according to the tapered waveguide mode transformer to reduce the losses derive from the mode mismatching between the input/ output waveguides and the modulator.

为了减小单模脊型波导和双脊波导的模式耦合损耗，根据模斑转换器的思想，在器件中设计了渐变双脊波导区。

research on the output circuit of klystron with cut-off waveguide filter

速调管截止波导滤波器型输出回路研究

square microcavity laser with an output waveguide is proposed and analyzed by the finite-difference time-domain (fdtd) technique.

本文提出了带输出波导的正方形微腔激光器，并利用时域有限差分法进行了分析计算。

and the strip-shaped output waveguide is manufactured on the substrate and positioned between the two resonant cavities.

以及一个制作于衬底上且位于两个谐振腔之间的条形输出波导。

two kinds of 2d arrays of 2 × 2, 2 × 4 consisted of single devices with leaky waveguide structure with their pulsed peak power output of 7 w and 11 w, respectively, have been completed.

采用漏光波导结构的单元器件，实现了二维2×2,2×4两种列阵，其脉冲输出峰值功率分别达到7W和11W。

the gyrotron output taper systerm is actually a range of taper circular waveguide between the output cavity and the output window.

回旋管渐变输出结构其实是一个介于输出腔和输出窗之间的一个渐变圆波导。

Further, a maximal output power of 9.4W, vertical divergence angle of 32 °, and threshold current density of 239A/ cm2 can be obtained by adapting broad waveguide layers.

采用宽波导结构可以得到器件的最大输出功率为9.4W，发散角为32°，阈值电流密度为239A/cm2。

The 5.1 μ m free running laser itself has peak output power in excess of 45 mW and the output power from the waveguide is about a few mW.

所采用的中红外激光器的波长是51μm，输出功率在45毫瓦以上。从光波导输出的光功率只有几个毫瓦。