wear oxidation的例句大全

A Controlled Atmosphere High Temperature Oxidation Wear Tester

可控气氛高温氧化磨损试验机的研制

The wear mechnisms of coated cutting tools mainly are flank wear and abrasive wear, accompany with adhesive wear, oxidation wear and breakage of the tool tip/ cutting edge.

涂层铣刀磨损方式主要是后刀面磨损和磨粒磨损，伴随着粘接磨损，氧化磨损以及刀尖和刀刃的破损。

Quasicrystals have been widely applied for surface protection coating because of their distinguished properties including low thermal conductivity and coefficient of friction, remarkable oxidation and wear resistances, and high hardness etc.

准晶材料具有低热导率、低磨擦系数、良好的耐磨性和抗氧化性、高硬度、高温塑性等优异性能，使之适于作为表面防护涂层。

The results show that thermal treatment and dispersion strengthening action of silicon carbide greatly improve hardness, wear resistance and resistance to oxidation at high temperature of amorphous nickel-tungsten-carbide deposit.

结果表明：碳化硅的弥散强化作用和热处理能显著提高复合镀层的硬度、耐磨性和抗高温氧化性。

The mechanism of oxidation at high temperature, resistance to elevated temperature oxidation and to thermal erosion as well as wear resistance under dry friction for the two type of surface layers were investigated.

采用高温氧化试验和耐热腐蚀试验考察了这两种渗层在高温下的氧化机制，并比较了它们的耐高温氧化性能和耐热腐蚀性能，以及它们在干摩擦条件下的耐磨性。

The component and working principle of automatic transmission were introduced, the function and properties of automatic transmission fluid ( ATF) were elaborated in details, such as high viscosity index, wear protection, antifoaming properties, thermal oxidation stability, elastomer compatibility etc.

介绍了汽车自动变速器的构造和工作原理，详细阐述了自动传动液的功能以及粘度特性、摩擦特性、抗泡沫性、热氧化安定性、橡胶相容性等使用性能要求。

And dynamic oxidation and hot pressed thermal sintering of wear particle are formation mechanisms of the protective oxide layers.

氧化物保护层形成的机制是磨屑的动态氧化和微区热压烧结。

The results show that at low sliding speed and small load, the main dry sliding wear mechanism of the coating is oxidation wear, and the wear resistance of the coating is 2~ 4 times higher than that of tempered 45 steel.

结果表明，轻载低速条件下，熔涂层的干摩擦滑动磨损机制以氧化磨损为主，与淬火低温回火态45钢相比，熔涂层的耐磨性是45钢的2～4倍；

The friction oxide generated in the wear surface, and the degree of oxidation increased and aggravated with the increase of load and sliding velocity.

磨面随着摩擦的进行氧化现象明显，氧化程度随着载荷及滑动速度的增加而加剧。

Effect of Additives on Wear Resistance of Micro-arc Oxidation Coating on TiAl Alloy

添加剂对TiAl合金微弧氧化膜耐磨性的影响

Study on testing method for oxidation and wear properties of gasoline engine oil& four ball seizure test

汽油机油氧化磨损性能试验方法研究&四球卡咬试验

The addition of Y made the microstructure of laser cladding layer fine, thus improved its hardness and wear resistance as well as its high temperature oxidation resistance.

钇的加入，细化了激光熔敷层的组织，提高了敷层的硬度、耐磨性及抗高温氧化性能。

inspection of the engines before and after tests together with the engine oil analyses, the results showed that the oxidation level, surface deposit formation and anti-wear properties of the vehicles fueled by ethanol gasoline were equal to those of the vehicles fueled by conventional gasoline.

经试验前后对样车发动机进行拆检和发动机润滑油分析结果表明，燃用乙醇汽油样车的发动机润滑油氧化性能、表面沉积物形成、试验样车发动机主要零部件的磨损与燃用93号标准汽油样车的相当。

aeroshell fluid 41 is a mineral oil based "super clean" hydraulic fluid containing an oxidation inhibitor and a non-zinc anti-wear additive.

大气外壳液41是矿物油基“超级干净的”液压油含有氧化抑制剂和非锌抗磨添加剂。

The main fretting wear mechanism is respectively adhesion, oxidation and fatigue wear.

过渡阶段以氧化磨损为主; 稳定阶段以疲劳磨损为主.

HRc ≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.

耐磨 、 耐气蚀、抗氧化. 堆焊高炉料钟、破碎机件.

The main wear mechanisms are oxidation wear, adhesive wear, and abrasive wear.

主要磨损机制为氧化磨损 、 粘着磨损和磨粒磨损.