weld的例句大全

But, as teaching and playback type of robot has the shortcomings of low efficiency of teaching 、 can not weld curved welding seam, it develops a new type of auto-teaching methods, which is based on image.

同时，由于示教再现型焊接机器人存在着焊缝对接困难、难以对曲线焊缝进行焊接、示教效率较低等缺点，提出一种新型的示教方法，即基于图像的焊接机器人自动示教方法。

Tear test on Al-Li alloy 1420 and laser-welded joints was carried out.

对1420铝锂合金及其激光焊接头的撕裂韧性进行了研究。

Technical summary on powder coating of large-diameter steel plate-welded pipe for utility water system

关于自来水用大直径钢板焊接钢管涂塑技术总结

Welding test of the products has shown that penetration of the lap weld can be controlled in required tolerance for design using the control system.

产品焊接试验表明它可以使搭接焊缝熔深控制在产品设计要求的范围之内。

Verification shall be provided using a welding procedure qualification ( general) as well as one production weld test plate from an identical heat for each welding procedure ( specific) utilised.

通过焊接工艺评定（一般）以及对每个焊接程序经受同样受热的一块产品焊接试板（特殊）来进行确认。

In addition, the technological test for all position welding both low carbon steel and stainless steel pipes was carried out, and both the included angle of the joint and the welding parameters for better appearance of weld were optimally chosen as well.

并对低碳钢和不锈钢两种管材的全位置焊接进行了工艺试验研究，优选出了焊缝成形较好的接头坡口角度及焊接规范参数。

Some problems of weld quality test of space frames with hollow ball joint

关于空心球节点网架焊缝质量检验的几个问题

Test of Weld Joint Property of Cr-Mo Steel after Normalizing Heat Treatment

正火处理的Cr-Mo耐热钢焊接接头性能试验研究

This paper go on practical theory analyse for welding Characteristic of 45# steel. Welding technology and welding standard are lay down. Mechanical function test of weld is go on.

文章针对45钢的焊接特点进行理论分析，制定出了切实可行的焊接工艺措施及焊接规范，并对接头进行力学性能试验，获得了满意的结果。

The paper introduces the structure type and welding characters of the rail continual connecting girders. The welding process test, weld procedure and the measures for distortion control are described in detail.

介绍了铁路连续结合梁的结构形式和焊接特点，着重叙述了焊接工艺试验，焊接工艺和控制变形的措施。

The dynamic mechanics property test of weld metal under three kinds of different vibration conditions ( 0, 0.3g and 0.6g) was carried out. The welding parameters and other test conditions were consistent. The vibration can obviously improve the storage modulus of weld metal.

对三种不同振动加速度（0、0.3g和0.6g）下的焊缝金属进行动态力学性能试验，结果发现：振动可以明显改善焊缝金属的储能模量；

The pattern of side bend of Mn Si multi layer weld is investigated with side bend test of weld joint, optical microscope and scanning electron microscope analysis. The relationship between weld thermal cycle, heat input and microstructure with pattern of side bend is also discussed.

本文通过焊接接头侧弯试验、光学显微镜和扫描电镜分析，对Mn－Si系多层焊焊缝侧弯形貌进行了研究，探讨了侧弯形貌与焊接热循环、焊接线能量及显微组织之间的关系。

Test for residual weld stress with little hole method

焊接残余应力的小孔法测试

Test method for weld strength of getter support

GB/T9506.11-1988吸气剂支架焊接强度测试方法

Liquid penetrant test for austenite weld joint and the reliable measures

奥氏体焊缝渗透探伤与可靠性措施

In this weldability test, the weld defect is eliminated, and the welding quality and efficiency are improved by adjusting welding parameter, optimizing the groove size and enhancing the fabricating precision of the backing and the inner clapboard.

通过焊接熔透性工艺试验、调控焊接工艺参数、优选装配坡口尺寸、提高衬条及隔板加工精度，保证了电渣焊质量和焊接效率的提高。

To adopt welding procedure method commonly used in long distance transmission pipeline, analog field site condition to weld for pipe with SSCC resistance itself and carry out SSCC resistance test to girth weld jointer obtained to provide technical support for oil and gas construction.

采用目前长输管线常用的焊接工艺方法，对本身具有抗SSCC性能的钢管模拟野外现场条件进行焊接，将所得环焊缝接头进行抗SSCC性能试验，为油气管线的施工建设提供技术支持。

Bending test results show that weld metal has excellent plasticity.

弯曲试验表明焊缝具有良好的塑性。

Property Test for Shell Longitudinal Weld Shaping of HTR-10 Reactor Pressure Vessel

HTR-10反应堆压力容器筒体纵缝成形性能试验

Sound field characteristic and echo wave feature in ultrasonic nondestructive test of electron beam weld

电子束焊缝超声无损检测声场特性及回波特征