welding pressure的例句大全

Design of welding pressure control system for ultrasonic gold wire bonding machine

超声波金丝球焊线机焊接压力控制系统设计

The research shows that heated plate temperature and welding pressure has a great significant effect on the joint performance, heating time has a significant effect on it, but press welding time is not significant.

研究表明，加热板温度和焊接压力对焊接接头性能的作用特别显著，加热时间对焊接接头性能的作用显著；而压焊时间对焊接接头性能的作用不显著。

Study on the Damage Problem of the Super-high Pressure Tubular Reactor in Safety Engineering Tele-operated TIG welding robot for hyperbaric underwater pipeline repair welding

超高压管式反应器安全工程中损伤问题的研究遥操作干式高压海底管道维修焊接机器人系统

For austenite hi-strength stainless steel, the tensile strength of resistance spot welding increases with the welding current and welding cycle under the condition of a constant pressure.

对奥氏体高强不锈钢而言，在压力一定时，电阻点焊拉伸强度随电流和焊接周波增加而增加。

Puts forward the solutions for the welding equipment, greatly reduces the adverse impact to welding sealing performance brought by the mechanical equipment defects by improving hydraulic pressure, adjusting the concentricity of welding jig, improving the structure of center diaphragm tensioning device and oil filled machine.

提出了焊接设备改良方案，通过提升液压站压力、调整焊接夹具同心度、改进中心膜片张紧设备和充油机结构，大大降低了机械设备缺陷对焊接密封性能造成的不利影响。

Cold welding under explosive pressure for rail

铁路钢轨接续线爆压冷焊技术

The Welding Technology of Steel Used for Thick Wall, Big Diameter Pressure Pipeline

大直径厚壁压力管道用钢的焊接技术

In order to improve the quality of the thermite welding of rails, the pressure thermite welding process is studied.

为了提高钢轨常规铝热焊的接头质量，作者对钢轨加压铝热焊工艺进行了试验研究。

Welding is a permanent connection method for the weldment atoms, which is through heating or pressure, or both with, and with or without the filler metal.

焊接是通过加热或加压，或两者并用，并且用或不用填充金属，使焊件间达到原子间结合的一种永久性连接的方法。

Steering knuckle tie rod end pressure lubricator What welding methods do you use in connecting the plates, frames, and beams?

转向节横拉杆接头油嘴在焊接钢板，肋骨，甲板横梁时，你们用什么焊接方法？

The Quality Control of T Joint in Pressure Vessel Welding

压力容器角焊缝的质量控制

Research and Development of Welding CAPP for Steel Pressure Vessel

钢制压力容器焊接CAPP技术及实现

It has low diffusible hydrogen and good low-temperature impact toughness, suitable for welding middle-carbon steel and pressure containers of low-temperature steel.

扩散氢含量低，低温冲击性能优异，适用于低温钢、中碳钢等压力容器的焊接。

Base on the actual welding thermal cycles curve of rail through air pressure welding, welding themal cycles process was simulated by Gleeble thermal simulation tests.

通过实测钢轨气压焊的焊接热循环曲线，并以此作为基础数据，采用Gleeble热模拟试验的方法模拟钢轨在气压焊工艺条件下的焊接热循环过程。

At present, rail welding includes flash welding, gas pressure welding, thermit welding and arc welding.

钢轨的焊接方法目前常用的有闪光焊、气压焊、铝热焊和电弧焊。

This article introduces the design principle, design planning, welding effect and technology characteristic of cold welding technology under explosive pressure for rail.

介绍了利用爆压冷焊技术研制开发的一种新型的爆压冷焊式钢轨接续线技术的设计原则、设计方案、焊接效果及技术性能。

Study of the Pressure Thermite Welding of Rails

钢轨加压铝热焊的研究

The Application of Internal Bore Welding in the Manufacture for the Low Pressure Reaction Water Condenser

内孔焊接在低压反应水冷凝器制造中的应用

Measurement of Pressure Field of Bonding Region in Explosive Welding with Manganin Pressure Gauge

爆炸焊接结合区压力场的锰铜压力量计测量

The pressure field of bonding region in explosive welding has been measured with a manganin pressure gauge.

用锰铜压力量计测得了爆炸焊接结合区的压力场。