welding process的例句大全

Optimize the welding process parameters on this basis, and in practical welding test on the valve parts.

在此基础上，对焊接工艺参数进行优化，并在实际阀门工件上进行堆焊试验。

Based on this reason, a direct coupled-analysis model was built to simulate the thermal distributions of welding process of the tube.

对此，文中建立了考虑接触热传导的小截面薄壁方管并行焊接的直接耦合分析模型。

The research reveals that the hi-frequency welding process not only causes the difference between the structure of the metal under the thermal effect by welding and the structure of the base metal, but also makes changes of orientation and continuity of the metal flow line in the steel;

研究结果表明：高频焊接过程除造成焊接热影响区与基体的组织差异外，还改变了钢中金属流线的方向和连续性；

Now submerged arc weld has been one of most widespread application in the numerous welding process.

埋弧焊是目前众多焊接方法中应用最广泛的工艺方法之一。

In order to improve the quality of the thermite welding of rails, the pressure thermite welding process is studied.

为了提高钢轨常规铝热焊的接头质量，作者对钢轨加压铝热焊工艺进行了试验研究。

Heat and time adjustment of spot welding process are made through the best fusion arithmetic adapting combined, average and decision making methods.

采用结合法、平均法和决策法相结合的最优融合算法，实现了点焊过程热量调节和时间调节。

The test showed that the magnetic field added to MIG welding process for aluminum alloy could be controlled by regulating parameters of the device, intermittent time and output current to achieve good welds.

试验表明，该装置的参数调节范围大，操作方便。通过调节装置的频率、间歇时间和输出电流来控制铝合金MIG焊过程施加的磁场参数，有效地改善了铝合金的焊缝形貌。

In the conventional MIG welding process this arc jumping phenomenon appears also at the time a globular transfer is converted into a streaming transfer.

在通常的熔化极气电焊中，当由颗粒过渡转变到射流过渡时也出现这种跳弧现象。

An Expert System for Diagnosing Weld Defects and Analyzing Welding Process Problems

铝合金焊接缺陷及工艺问题分析诊断专家系统

Application of Ar-CO_ 2 Mixed Gas in the Welding Process

Ar-CO2混合气在焊接工艺上的应用

The results show that during welding process the contact radius increases gradually, the highest temperature is always located at the center of the electrode tip surface, while the electrode stress and current density both concentrate at the edge of contact region.

结果表明：所考察的焊接条件下，接触半径在焊接过程中逐渐增大，电极端面的中部温度最高，而电极压力和电流密度均在接触区边缘集中。

Randomicity& stability of short-circuiting droplet transfer in arc welding process

弧焊短路过渡过程的随机性与稳定性

During the welding process of titanium alloy and aluminum alloy, it is easy to form many kinds of brittle intermetallic compounds at the interface of Ti/ Al dissimilar alloys. Those compounds weak the bonding strength of Ti/ Al joints.

钛合金和铝合金的焊接过程中，在Ti合金/Al合金界面处极易生成各种脆性的金属间化合物，制约着接头的结合性能。

The actual welding process is very complicated, so the traditional control method is unmanageable or bad to control the result.

实际的焊接过程非常复杂，采用传统的控制方法很难满足控制要求或控制效果不佳。

Welding Process Characteristic of Titanium Steel Clad Plate for Internal Cylinder

钢内筒钛钢复合板焊接工艺特点

Stress distribution in the welding process of solar cell module was analyzed by using numerical simulation aimed to the problem in the welding process of solar cell module.

针对太阳电池组件焊接过程中存在的问题，运用数值模拟技术分析太阳电池组件焊接工艺中的应力分布情况。

Study on Welding Mode Transition and Stability of Welding Process in Laser Welding

激光焊接时焊接模式转变规律及焊接过程稳定性的研究

Compared with aluminum alloy traditional welding technology, laser welding process has many advantages.

相对于铝合金的传统焊接工艺，激光焊接工艺具有诸多优势。

The method preprocesses power input of manual weld through rough neural networks, and judges lack of weld in a welding process.

该方法通过人工神经网络对采样的焊接热功输入进行处理，从而判断焊接过程是否漏焊。

Study on Pressure Resistance Spot Welding Process of Guide Thimble and Grid of AFA 3G Advanced Fuel Assembly Skeleton

AFA3G燃料组件骨架导向管与格架的压力电阻焊工艺研究