white layer的例句大全

Study on the Formation of the white Layer and the Melted layer in W_ ( l8) Cr_4V Steel Oil Quenched in Vacuum

W（18）Cr4V钢真空油淬白亮层、熔化层形成原因的试验研究

The tangential stress was still the major factor for controlling the growth of white layer under grease lubrication.

润滑条件下表面切应力τ仍是微动白层形成和发展的主要控制因素。

Next make another white layer that you'll Blur and change the Opacity to 5 %.

这步创建另一个白色图层,并模糊它,再将它的透明度设置为5%.

Morphology and formation mechanism of white layer of annealed medium carbon steel under high energy impact load were estimated.

对退火45钢在高能冲击接触载荷下的白层形态及其形成机制进行了研究。

Create a new white layer and place it in the bottom. Layer > New fill layer > Solid color.

创建新的空白层,并将其置于底部. 对它执行图层>新建填充涂层>纯色(白色——译者注).

Study of Surface White Layer in Hard Metal Turning

高硬金属加工过程中表面白层的研究

table 1 summarizes the values of the drilling-induced stress and the average white layer thickness for the skd11 tool steel.

表格1总结了SKD11型号工具钢的由钻洞导致的压力和白色亮层的平均厚度的数值。

the common problems during jelly production were studied. the sterilization experiment of 200g jelly with pulp, the air bubble and white layer slant experiment of mousse jelly, the experiment of ring break of the penguin machine were done.

本文分析了在果冻生产过程中常见的几种质量异常现象，进行了200g果肉果冻不同摆杯方式的杀菌效果试验、慕司果冻气泡和白色倾斜改善试验、企鹅机断圈分析试验。

Create a new white layer and place it in the bottom. Layer > New fill layer > Solid color.

创建新的空白层,并将其置于底部. 对它执行图层>新建填充涂层>纯色(白色——译者注).

The surface of the concrete floor was coated by a white layer of slaking-lime.

“混凝土”地面涂有白色饰面,饰面是以石灰浆涂刷而成.

In this study, a real-time acoustic emission ( AE) monitoring system was developed to investigate white layer and corresponding surface finish and tool ware.

建立一个基于实时切削噪声信号的在线监测系统对白层，表面质量和刀具磨损进行监测分析。

Analysis of bright and white layer on surface of tools of high-speed steel

高速钢工具表面亮白层分析

A white layer& wear affected layer is formed on the gearing surface of the automotive gear after failure.

汽车齿轮失效后，齿轮齿部啮合表面形成一个白色层&磨损变质层。

Experimental Study on Characterization of White Layer Formed in Grinding Process of Harden Bearing Steel

淬硬轴承钢GCr15磨削白层结构特性的实验研究

The grinding affected layers on bearing surface consist of absorption layer, oxide layer, white layer, overtempering and plastic deformation layer.

变质层由表至里是由吸附层、氧化层、白层及过回火塑性变形层组成。氧化层是Fe与合金元素氧化物组成的混合结构，并存在Si的表面富集。

it is clear that the thicker the white layer the higher the drilling-induced stress is also satisfied with the material of skd11 tool steel.

可以很清楚看到，白色亮层越厚，由钻洞导致的压力就越高，这一点也与SKD11型号的工具钢材料相吻合。

Effect of oxygen on Corrosion Resistance of Nitriding White Layer on A3 Steel and Grey Iron

氧对A3钢和灰口铸铁氮化白层抗蚀性的影响

surface plastic deformation always occurs during the whole tool wear process. the drastic wear of the flank surface on cutting tool produces white layer in workpiece surface.

工件表面的塑性变形在刀具磨损整个过程中都会发生，加工表面白层在刀具后刀面磨损剧烈时产生，但X射线分析没有发现相变。

Three layers of Plasma plume can be divided by color. The most internal layer shows white with the largest area. The middle layer shows mixed color inclined to blue with middle temperature while the outermost layer is green with the lowest temperature.

从处理好的闪光图片中可以看出等离子体羽颜色大致可分为三层：最内层温度最高显白色且所占面积最大，中间层温度中等显混合色偏蓝，最外层温度最低显绿色。

elements in white bright layer on the surface of 45 steel were distributed with electron microprobe analysis.

利用电子探针对白亮层进行了成分分析。