wire drawing的例句大全

the causes judgement of drawing breakage of hard wire

硬线盘条拉拔断裂原因初步判断

cold drawing annealed ground steel wire

冷拉退火磨光钢丝

analysis of bamboo cracks of 45 steel wire rod in drawing

45钢线材拉拔节裂分析

production of high strength galvanized steel wire for rope with drawing after medium galvanizing by dipping

中镀后拉工艺生产高强度热镀锌制绳钢丝

research of light drawing process on bearing steel wire rod and bar

长短拉棒延伸率归一化辨析轴承钢棒线材轻拉工艺研究

production and drawing of 80 steel wire rod

80钢盘条的生产与拉拔

pearlitic steel wire rods with low cementite volume fraction for direct drawing

用于直接拉拔的低渗碳体含量的珠光体盘条

drawing of high strength alloy welding wire

高强度合金焊丝的拉拔

Sand-blasting nozzles , drawing nibs for high strength steel wire, lathe cutting tools , saw tips.

适合于喷沙嘴、适合高强钢绞线的拔丝夹头 、 车刀 、 锯齿.

The tensile strength of drawing wire can reach 1421 MPa. And the highest relative conductivity can reach 30% IACS ( International Annealed Copper Standard). The effects of cold drawing on the properties of electrode wire have been investigated.

拉制硬态电极线抗拉强度可达1421MPa，相对导电率最高可达30%IACS（国际退火（软）铜标准）。

Application advantage of CCAW ( copper clad aluminum wire) and processing technology of clad-process welding CCAW were introduced. The effect factor of solid-state bonding during drawing the bimetal wire was analyzed.

介绍了铜包铝线的使用优点和包复焊接铜包铝线加工工艺过程，分析了通过双金属拉拔实现金属间固相结合的影响因素；

A finite element model for drawing process of high carbon wire with inner micro-defects was built.

通过对高碳盘条内部缺陷的假设,采用有限元法研究了高碳盘条拉拔过程中,工艺参数对裂纹扩展情况的影响.

Microstructure and mechanical properties of copper clad aluminum wire by drawing at room temperature

铜包铝线材室温拉变形后的显微组织和力学性能

The microstructure of copper clad aluminum wire by drawing at room temperature is vimineous grain as fibril shape from prime equiaxed grain.

经室温拉拔的铜包铝线的显微组织是纤维状细长晶粒，晶界面积增大系数与形变量近似地成正比。

Hot galvanized iron wire: The product structure of-quality carbon steel, the drawing, from hot-dip galvanizing process.

热镀锌丝: 该产品应用优质碳素结构钢, 经拉拔 、 热镀锌加工而成.

This operation consisted of drawing wire through a die to reduce it to the desired diameter.

这项作业通过拉线模,把钢丝拉成符合要求的直径.

To analyze the factors affecting drawing property of wire rod for hose steel wire.

分析影响胶管钢丝用线材拉拔性能的因素.

A file exchange interface programming system is presented, which can automatically translate text file of profile coordinates or drawing file of profile to the file used by wire cut EDM directly.

通过自动编程系统将设计系统生成的齿廓坐标文件或图形文件直接转换成线切割加工文件（3B格式），可实现非圆齿轮的自动编程加工。

Paper thinly bing drawing, the level of uniformity, long thin wire, suitable for hot food.

拉丝烙饼皮极薄, 层次均匀, 丝细绵长, 宜于热吃.

By Cr microalloying, the fore eutectoid ferrite eduction is restrained, the distance between rows of pearlite is decreased, then the tensile strength, section shrinkage and drawing property of high carbon steel wire rod is obviously raised and improved.

高碳钢中加入的铬元素抑制先共析铁素体析出，减小珠光体片层间距，可明显提高抗拉强度，提高断面收缩率，改善线材的拉拔性能。