work hardening的例句大全

HAYNES HR 120 alloy cutting performance is bad and isvery sensitive to the work hardening.

HAYNESHR120合金切削性能差,对加工硬化很敏感.

work hardening precipitation hardening strain aging quench aging sensitizention

加工硬化沉淀硬化应变实效淬火实效敏化

research on microstructure and work hardening mechanism of high manganese steel by simulating actual working condition

不同相对冲击功下高锰钢组织与加工硬化机制的研究

new analysis on the mechanics, temperature, tool life and work hardening in oblique machining

斜角切削的力学温度刀具耐用度及工件硬化的新研究

DP steel has better work hardening ability while TRIP steel has better bake hardening ability.

DP钢拥有更加优良的加工硬化能力,TRIP钢则具有较为理想的烘烤硬化能力.

MISO option uses the von Mises yield criteria coupled with an isotropic work hardening assumption.

帮助中的小应变分析和大应变分析具体是指什么情况?

The work hardening rate of pure tantalum was studied by tension test, optical microscope and TEM.

借助力学性能实验 、 金相显微镜和透射电镜等手段研究了纯钽的加工硬化速率.

The pipeline steel with strain-based design is usually characterized by high initial work hardening rate, good ductility, and low yield stress to tensile strength ratio.

抗大变形管线钢就是基于应变设计的方法得到的具有连续屈服、较低的屈强比、较高的加工硬化指数以及均匀塑性变形延伸率等特性的管线钢。

Proper precipitate reinforcement treatment can improve the ability of work hardening to some degree.

合适的沉淀强化处理可以在一定范围内提高高锰钢的加工硬化能力。

the microhardness deformation bands results from work hardening, but the microhardness in the transformation bands is influenced by phase transition hardening. 4.

形变带硬度与加工硬化有关，而转变带的硬度则受到相变硬化的影响。

The results show that the work hardening rate of pure tantalum is low.

研究结果表明：纯钽的宏观加工硬化速率比较低。

The wear mechanism of cast iron-spraying molybdenum is that the transfer particles come into being in contact surface. The transfer particles plough grooves and cracks on the surface after work hardening. The embedded particles tear the surface and become grooves after adhesive.

铸铁-喷钼配对副的磨损机理为先在接触表面产生转移粒子，加工硬化后在表面犁耕出犁沟和裂纹，同时镶嵌进磨损表面的粒子与基体黏着，撕裂后使表面形成犁沟。

Pre twisted tungsten projectile is soft inside and hard outside because of long rod's work hardening effect.

预扭转钨弹由于其长杆的加工硬化效应，具有外硬内软、外脆内韧的特性。

Effects of Shear Plane Boundary Condition on Depth of Surface Work hardening

剪切面边界条件对工件表面层加工硬化深度的影响

Based on the thermal effects, induction current can heat the surface of the work piece, make the surface heat fast and then refrigerate quickly. This modern industrial quenching technology is called induction heating surface hardening.

感应加热表面淬火是利用感应电流通过工件产生热效应，使工件表面局部加热继之快速冷却的现代工业淬火技术。

Their argument is based on the plastic work Wp being the controlling tactor in hardening.

他们的论点是基于在硬化中的塑性功是可控制的因子.

secondary hardening of semi high speed steel for cold work rolls

冷轧工作辊用半高速钢的二次硬化效应

For these reasons, agar rapidly replaced gelatin as the hardening agent of choice for bacterriological work.

由于这些原因, 琼脂很快代替了明胶,或为细菌学研究的较理想的固化剂.

ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures

从工作高温沉淀硬化用铁素珠层工程钢

the properties of locomotive engine cylinder surfaces hardened by yag laser are studied. the hardening size calculated is in accord with that obtained from test. thus the test work volume for determining the technical parameters can be reduced efficiently.

在由YAG激光强化机车气缸套表面的试验研究中，理论计算的硬化带尺寸与试验结果一致，采用此方法确定工艺参数，可有效减少试验工作量。