working fluid的例句大全

Comparison of performance between non-azeotropic mixtures working fluid and R22

一种非共沸循环工质与R22的性能对比实验

To predict the rising velocity of hydrogen gas and the influencing factors, a suitable working fluid was determined for experimental simulation on the vold fraction of hydrogen in a neutron moderator.

为了推断中子慢化剂液氢中气化氢气泡的上升速度及影响因素，选取合适的工质进行了含气率的模拟实验。

Modeling of Aqueous Electrolyte Solution by Statistical Mechanic Theory; EVALUATION OF CHARACTERISTICS OF AMTEC WITH POTASSIUM WORKING FLUID

用统计力学理论研究电解质溶液的热力学性质钾工质碱金属热电直接发电器件特性评价

Design of Flow Boiling Heat Transfer Experiment System Using Alternative Refrigerant as Working Fluid

替代制冷剂流动沸腾传热实验台设计建造与探讨

Capillary Pumped Loops ( CPLs) and Loop Heat Pipes ( LHPs) are two-phase heat transport devices which utilize the capillary forces developed in evaporator wick to drive the working fluid. They are capable of transferring large heat loads over long distances with small temperature differentials.

毛细泵回路（CPLs）和环路热管（LHPs）是一类两相热传递装置，它利用蒸发器中毛细芯的毛细力驱动工质流动，具有传输距离远，传输功率大，温差小等特点。

Capillary pumped loop ( CPL) is an advanced temperature-control device. Heat transfer in CPL is realized with phase transition of working fluid, and the capillary pressure is used for overcoming the resistance in circulatory flow.

毛细抽吸两相流体回路（简称CPL）是一种先进的控温装置，它采用相变传热方式并利用毛细力来克服工质循环流动的阻力。

The numerical analysis shows that the temperature field of the radiator gets uniform apparently when the working fluid flows.

结果表明：辐射器内工质的流动对辐射器的温度分布有明显的改善作用；

Evaluation of characteristics of AMTEC with potassium working fluid

钾工质碱金属热电直接发电器件特性评价

WEDM include: high-frequency pulse power, wire tube, machine bed, the working fluid circulation system, motion control components.

电火花线切割机床包括：高频脉冲电源、丝筒、机床床身、工作液循环系统、运动控制等部分。

Effect of microchannel structure and working fluid on flow boiling in microchannels

微槽结构和工质对槽内流动沸腾的影响

Absorption refrigeration is an energy saving refrigeration technology and an effective approach to utilize low grade heat as driving power and its working fluid is natural cryogen.

吸收式制冷是一种可以直接采用低品位的热能作为驱动能源的制冷方式，并且利用天然工质作为制冷剂，是一种节能环保的绿色技术。

Thermal vapour compressor ( TVC) belongs to gas-ejectors using steam as the working fluid.

热力蒸汽压缩器是一种以蒸汽为工质的气体喷射器。

As a new flow component, the ice valve was developed to close or open the liquid flow running inside a micro/ nano channel based on the freeze/ thawing phase change of the working fluid using a thermoelectric cooling device.

冰阀是一种利用微/纳米流道内流体自身的冻结/融化相变过程来实现关断或开启作用的新型流体元件。

function of acetic acid in acidizing working fluid

乙酸在酸化工作液中的作用

Any thermal cycle or working fluid could be considered.

可以采用任何形式的热循环和工作流体。

Study on the Pressure Test Working Fluid of Refrigeration Pressure Vessel and it ′ s Application Technique

在用制冷压力容器试压工质及其应用技术的研究

An experiment system is set up for testing the thin film evaporator by adjusting the fluid amount, heating power and system pressure, with deionized water as the working fluid.

本文搭建了一套实验系统，以去离子水为工质，通过调节进液量、加热功率、系统压力等方法测试所研制蒸发器的传热性能。

State-of-the-art and Prospect of the Natural Working Fluid& Carbon Dioxide Experimental Study on Heat Transfer Characteristics of Thermal Syphon under Different Natural Working Fluid

天然工质CO2的发展现状与前景展望CPU重力热管使用不同天然工质时的传热特性实验研究

Experimental Study on Heat Transfer Characteristics of Thermal Syphon under Different Natural Working Fluid; Effect Mechanism of Fibre Orientation on the Adiabatic Shear of as-Extruded WHA

CPU重力热管使用不同天然工质时的传热特性实验研究热挤压钨重合金纤维方向对绝热剪切特性的影响规律及机理研究

In order to determine the void fraction in neutron moderator, the circulation ability of the two-phase hydrogen thermal siphon system, and the structure of components of the CNS, the mockup test was performed using Freon-113 as working fluid.

针对概念设计中采用的两相虹吸氢回路系统，使用氟里昂113进行了1：1的模化试验研究，确定了中子慢化室含气率、热虹吸系统循环能力及各部件的初步结构形式和尺寸。