working width的例句大全

Tractor wheel tracks are completely covered after tillage as the working width is much wider.

该机采用宽耕幅、对称悬挂使轮迹全部覆盖.

Intelligent cutting equipment can set working width according to fabric width increasing efficiency.

智能裁断装置可根据门幅设定切刀裁断宽度,提高效率.

The traditional operating method of LD power driver is that the user preset the parameters of drive current such as the rate, pulse width and amplitude. The LD cannot adjust its working parameters according to the variation of its environment with this method.

传统LD驱动电源通常采用电流参数预定输入的方式，其只能输出给定脉宽、重复频率及峰值的驱动电流，这种方式注定其不能随工作环境的变化而做相应调节。

Based on the working principle of non-contact capacitance sensor, influence of the edge effect of gauge head and width of protecting ring are studied, gauge head for measuring blind hole is designed to sight the centers of two adjacent holes.

基于非接触式电容测孔传感器的基本原理，研究了电容测头的电场边缘效应的影响及保护环的宽度选择，设计了电容瞄准测孔传感器的测头用于对相邻小孔的中心进行瞄准定位；

with the working current increasing, the width and depth of remelt-solidified layer and hardened layer increase, hardness goes down.

工作电流增大，熔凝层和硬化层的深度、宽度增加，硬度值降低；

the working face mining distance can decrease when fracture occurs and the mining width increases.

当工作面宽度加大时，开始出现破裂的工作面推进长度减小。

Other causes include the out-of-tolerance of blade chord width between adjacent blades, the undersize contact area of serrated working side and the local wearing of non-working side.

而相邻原机件叶片弦宽尺寸超差，锯齿形工作接触面积小，以及非工作面局部碰磨，是引发故障的次要因素。

At the same time, the line width measurement methods are emphasized in this thesis. When we use homodyne method, the spectral line-width of ECSL is 20 KHz. Therefore, Lasers which have working stability can be continuously exported.

并重点介绍了线宽的测量方法，最终使用零拍法测得激光器的光谱线宽为20KHz，激光器可以连续输出工作稳定度的激光。

We analyzed the winding configuration and chose the regular octagon form and also studied the relationship between the driving voltage and working distance about the PI-cantilever, which aimed at optimizing the structure of the PI-cantilever in length, width and thickness.

给出合理的线圈宽度与间隙宽度，提出了八边形的线圈绕组结构，计算得出PI膜悬臂梁光开关驱动电压与工作距离的关系，并对悬臂梁长度、宽度、厚度进行优化。