x ray diffraction的例句大全

The vertical section LaAl_2-LaCu_5 of the ternary system Al-Cu-La was studied by differential thermal analysis and X-ray diffraction method.

用微差热分析和x-射线衍射法研究了Al-Cu-La系的LaAl2-LaCu5垂直截面。

By using Spark atomic emission spectrometer, Plasma spectroscopy, X-ray diffraction, Optical microscopy and SEM, the changes of composition and microstructure were measured. By using Tensile specimen machine and Vickers hardness tester, mechanical properties were measured.

用火花原子放射光谱仪、等离子体光谱仪、X-Ray衍射仪、金相显微镜、场发射扫描电镜等手段测定了试样成份、显微组织和结构，用拉伸试样机、维氏硬度计测定了试样的力学性能。

X-ray diffraction, scanning electron microscope, energy dispersive spectrum and laser Raman spectrum analysis were used to identify thaumasite in paste sample stored in 10% ( in mass) of MgSO_ ( 4) solution at different temperatures.

将浸泡于不同温度的质量分数为10%的MgSO4溶液中的含石灰石粉水泥石试样进行X射线衍射分析、扫描电子显微分析、能谱分析和激光Raman光谱分析。

X-ray diffraction reveals that after a heat treatment at 700 ℃, the film is in a single phase of tetragonal perovskite structure.

X射线衍射证实，经700℃热处理后，膜呈现四方钙钛矿的单相结构。

Investigation of X ray and TEM diffraction of spinodal decomposition and ordering for Cu 4wt% Ti alloy

面心立方合金调幅分解与有序化的X射线和透射电镜衍射研究

Analysis and computation of X-ray diffraction of spinel structure

尖晶石型结构的X射线衍射分析和计算

The properties of the product were characterized by thermogravimetry-differential thermal analysis, X-ray diffraction and Fourier infrared transmission spectroscopy.

用差热-热重分析、X射线衍射、红外光谱等手段对样品进行表征。

Debye's research on polycrystalline X-ray diffraction

德拜对多晶X射线衍射的研究

( 1S, 3R)-Camphoric anhydride has been synthesized via ( 1R, 3S)-camphoric acid and characterized by IR, EA, optical rotation and X-ray single crystal diffraction techniques.

（1S，3R）-樟脑酸酐由（1R，3S）-樟脑酸制得并经过元素分析、红外光谱、比旋光度和X-射线单晶衍射表征。

The determination of Debye characteristic temperatures of crystals from X-ray diffraction intensities

从X射线的衍射强度测定晶体的德拜特征温度

The mechanics analysis was based on the change of the properties of sorbents after calcination, such as apparent structure, cell parameter and pore distribution, which were measured by SEM, x-ray diffraction ( XRD).

并利用扫描电镜、x射线分光衍射、压汞分析等方法研究金属化合物对石灰石的表面形态，晶格结构以及孔结构特性的影响，从而探讨了金属化合物对促进石灰石脱硫效果的促进机理。

A structural study of cokes using optical microscopy and X-ray diffraction

用光学显微术和X-射线衍射法研究焦炭结构

The microstructure and morphology of products were examined by differential thermal analysis, X-ray diffraction, and transmission electron microscopy.

采用差热分析（DTA）、X射线衍射（XRD）和透射电子显微技术（TEM）分析了产物的组织形态。

The melting crystallization and cold crystallization behavior of PLLA and its nanocomposites were characterized by Differential Scanning Calorimetry ( DSC) and X-Ray Diffraction ( XRD) measurements.

用差示扫描量热仪（DSC）和X射线衍射仪（XRD）对复合材料的非等温熔体结晶和冷结晶行为进行了研究。

fourier transform infrared spectroscopy ( ftir) and x-ray diffraction were used to characterize the corrosion products of zn.

同时应用X射线衍射仪及Fourier变换红外光谱仪对Zn表面腐蚀产物进行了分析。

the properties of the films and the effects of growth parameters on quality of the ga_2o_3 films were studied using x-ray diffraction, uv-vis spectrophotometer, sem techniques, infrared spectrophotometer, etc.

利用X射线衍射仪，紫外&可见分光光度计，场发射扫描电镜，傅立叶红外光谱仪等对氧化镓薄膜的结构性能，光学性能及表面形貌进行了测试和分析。

the primary study was listed as following: xrd ( x-ray diffraction) and ftir ( fourier transform infrared spectrum) both are used to characterize the photocatalyst.

主要进行如下研究：采用X射线衍射仪（XRD）和傅立叶变换红外光谱仪（FTIR）对硅胶负载型TiO2进行表征分析。

The influence of zirconium on the crystallization and phase transformation of amorphous Co-Si thin films was investigated by X-ray diffraction and differential scanning calorimeter.

利用X射线衍射分析技术结合差示扫描量热仪，研究了Zr在Co-Si合金非晶薄膜晶化和相变过程中的作用。

The crystallization behavior of polyatomic amorphous alloy Ni_ ( 82.5) Cr_7Si_ ( 4.5) B_3Fe_3 in heating is studied by means of differential scanning calorimeter ( DSC) and X-Ray diffraction techniques.

采用示差扫描量热计（DSC）和X射线衍射方法研究了Ni（82.5）Cr7Si（4.5）B3Fe3多元非晶态合金钎料在加热时的晶化特性。

The room temperature section of the phase equilibrium diagram of the Al-Cr-Cu ternary system has been investigated by means of X-ray powder diffraction method.

本文用X射线粉末衍射法研究了Al-Cr-Cu三元合金系相图的室温截面。