x-ray diffraction的例句大全

Superlattice structure's X-ray diffraction analyzing and structure parameters's calculating

超晶格结构X射线衍射分析及其结构参数的计算

Mg-Sn composite oxide precursors were synthesized by the hydrothermal and co-precipitation methods. A series of products could be obtained by the decomposition of precursor at different temperatures for 4h. The samples were investigated by thermo-gravimetric and differential thermal analysis, X-ray diffraction and scanning electron microscopy.

采用水热法和共沉淀法合成Mg-Sn复合氧化物的前驱体，并将其分别在不同温度下煅烧4h，得到一系列Mg-Sn复合氧化物。

The prepared samples were characterized by powder X-ray diffraction, N2 adsorption, Raman spectroscopy, thermogravimetic analysis, SEM, TEM and HRTEM.

采用粉末X射线衍射、低温N2吸附、紫外拉曼光谱、热重分析、扫描电镜、透射电镜和高分辨透射电镜对碳材料的结构进行了综合表征。

Chapter two concerns three experiment technique, internal friction technique, thermal analysis technique and X-ray diffraction technique.

第二章则介绍了课题工作中所使用的三种实验技术：内耗技术、热分析技术和X射线衍射技术。

Tests were carried out by measuring the thermal expansion and the X-ray diffraction intensities of high-tension insulators.

通过测定高强度绝缘子的热膨胀和X射线衍射强度进行试验。

Utilizing heat aging experiments, thermal analysis technique, X-ray diffraction etc, this article investigates stability and crystal properties of polyaniline/ poly ( vinyl alcohol) films.

利用热老化实验、热分析技术、X-射线衍射等考察了聚苯胺/聚乙烯醇复合膜的稳定性能和结晶性能；

Thus iron fiber was modified with SiO_2 coating. The microstructure, composition, antioxidation behavior, and crystallization of SiO_2-coated iron fiber were characterized by means of scanning electron microscopy, energy dispersive X-ray analysis, thermal gravimetry, and X-ray diffraction.

在铁纤维表面涂覆SiO2涂层，借助扫描电镜、能谱分析、热重分析和X射线衍射分析技术，对其改性前后的形貌、成分、物相及抗氧化能力进行了分析。

The structure and upconversion luminescence properties of oxy-fluoro-tungstosilicate glasses and oxy-fluoro-tungstosilicate glass ceramics were studied by absorption spectra, photoluminescence spectra, raman spectra, infrared spectra, differential thermal analysis, simultaneous thermal analysis and X-ray diffraction and so on.

并用吸收-透射光谱、发射光谱、拉曼光谱、红外光谱、差热分析、同步热分析、X射线衍射等手段研究了上述玻璃和微晶玻璃的结构和发光性能。

The effect of precursor on crystalline phase and sizes of TiO_2 particles and the transformation temperatures of the TiO_2 particles were studied by using thermal gravimetric and differential thermal ( TG-DTA), X-ray diffraction ( XRD) and scanning electron microscopy ( SEM) measurements.

采用热重-差热、X射线衍射、扫描电子显微镜等分析方法，研究了前驱物的组成对所得颗粒的形貌、粒径和分散程度的影响规律以及TiO2颗粒的晶相转变温度。

The kinds and morphologies of intermediate products obtained during this thermal decomposition process were investigated using integrated thermal analysis, X-ray diffraction, scanning electron microscope, energy dispersive X-ray spectrum and chemical analysis.

采用热重分析、X射线衍射、扫描电镜、能谱分析和化学分析等方法研究中间产物及其形貌。

X-ray Diffraction Analysis on the Thick Oil Hotly Picks of the Boiler Scaling

稠油热采锅炉结垢物的X射线衍射分析

Physic-chemical properties of the catalyst were characterized by X-ray diffraction, transmission electron microscope, temperature programmed reduction in H2, Brunauer – Emmett – Teller.

通过X射线衍射、透射电镜电子显微镜、氢气程序升温还原和比表面积分析对其进行了表征。

Rock thin section analysis and X-ray diffraction analysis show that different sedimentary microfacies have different petrographic properties. The experiment analysis also slows that same charateristics in reservoir sensitivity also exist.

岩石薄片分析及黏土矿物X衍射分析表明，各沉积微相带具有不同的岩石学特征，储集层敏感性分析也表明不同沉积微相中的储集层其敏感性有所差异。

Micro-Method Powder X-Ray Diffraction Analysis of Thermal Decomposition Product of Basic Cobalt Carbonate

碱式碳酸钴热分解产物的微量粉末X射线衍射分析

This paper described the formation mechanism of residual thermal stress in glass ceramics. The X-ray diffraction is chosen as the tool of residual stress measurement in CAS glass ceramics after comparison of several common measuring procedures.

分析了CAS系统微晶玻璃中热残余应力的形成机理，并对几种常见的残余应力的方法进行了比较，最后确定用普通X射线衍射法测定CAS系统微晶玻璃中的残余应力。

The microstructures and properties of organic vermiculites were characterized by X-ray diffraction, Fourier infrared spectra and thermal gravimetric analysis.

对有机插层后的蛭石进行了粉晶X射线衍射、Fourier变换红外光谱和热重分析表征。

The structure and properties of the products were characterized by fourier transform infrared spectroscopy ( FT-IR), thermal gravimetric analysis ( TGA), solubility test and X-ray diffraction, respectively.

通过红外光谱（FT-IR）、热重分析（TGA）、溶解性测试、X射线衍射（XRD）分析表征了产物的结构和性能。

The samples were characterized by X-ray diffraction ( XRD) Differential Thermal Analysis and Thermo Gravimetric Analysis ( DTA-TG) and Transmission Electron Microscopy ( TEM).

利用热分析仪（TG-DTA）、透射电子显微镜（TEM）、X射线衍射仪（XRD）对材料的结构进行表征。

The phases of samples were analyzed by X-ray diffraction and their thermoelectric properties were tested by electric constant instrument and laser thermal conductance instrument.

用X射线衍射分析了样品的相组成，用电常数测试仪和激光热导仪测试了样品的热电性能。

Progress in time-resolved X-ray diffraction

时间分辨的X射线衍射