mig

Application: with steady chemical compositions, it can be used in welding and manufacturing semi-finished of SAW, TIG, MIG wire, etc.

用途：用作电焊条生产之焊条芯线，埋弧焊丝（SAW）、氩弧焊丝（TIG）、电弧焊丝（MIG）之半成品线。

The MiG pilot erroneously assumed that the flak from the airfield would scare him off.

米格机飞行员错误的认为机场的高射炮会吓走雷斯纳.

The NBC series SCR control of MIG/ MAG semi-automatic gas-welding machine got "high-tech products Award" and entered a "high-tech enterprises" rank.

研制生产的NBC系列晶闸管控制MIG/MAG半自动气保焊机获国家“高新技术产品奖”，并进入了“高科技企业”行列。

The simulation results proved that the influence of the above parameters is remarkable. It is feasible to control the arc voltage and welding current in a certain range through adjusting the pulsed parameters and the wire feeding speed of the simulation model for tandem pulsed MIG welding.

结果证明，脉冲参数及送丝速度对仿真波形的影响是比较大的，在双丝脉冲MIG焊中利用仿真模型来调节各参数以控制电弧电压、焊接电流在一定的范围之内是可行的。

Despite this warning, Risner continued the chase: he was too close to let the MiG away.

雷斯纳决定不顾警告, 继续这场追击: 他离米格机太近了,米格机根本逃不掉.

Tandem MIG welding of high-strength thick aluminum alloy plate

高强铝合金厚板双丝MIG焊工艺的初步研究

Application of CO _ 2 + O _ 2 mixture shield gas used in MIG welding is introduced.

本文介绍双元活性气体CO_2+O_2作为保护气体在熔化极电弧焊中的应用.

The test showed that the magnetic field added to MIG welding process for aluminum alloy could be controlled by regulating parameters of the device, intermittent time and output current to achieve good welds.

试验表明，该装置的参数调节范围大，操作方便。通过调节装置的频率、间歇时间和输出电流来控制铝合金MIG焊过程施加的磁场参数，有效地改善了铝合金的焊缝形貌。

During the treatment, the mRNA levels of IL-8, MIG and TARC obviously decreased.

治疗过程中IL8 、 MIG、TARC的 表达水平有显著下降.

Waveform Control in Droplet Transfer Phase During Pulsed MIG Welding

脉冲MIG焊熔滴过渡阶段的波形控制

The Dynamic Simulation and Verification of the Tandem Pulsed MIG Welding

双丝脉冲MIG焊过程的动态仿真及试验验证

MIG Welding Quality Diagnose Based on Arc Light Spectrum

基于电弧光谱的钢熔化极惰性气体保护焊质量判识

Sensing Droplet Transfer Mode by Arc Light Radiation in Pulsed MIG Welding Using a Aluminium Alloy Electrode

铝合金脉冲MIG焊熔滴过渡的弧光传感

Application O _ 2 mixture shield gas used in MIG welding is introduced.

本文介绍双元活性气体O_2作为保护气体在熔化极电弧焊中的应用.

This paper brings forward a new method of high efficiency& Tandem pulsed MIG welding on the basis of the development trends of double arc welding.

结合双弧焊的发展趋势，本文提出了一种新的高效化焊接方法――双丝脉冲MIG焊。

Single power source plasma& mig welding process

单电源等离子-MIG焊方法

In the three conditions, wire feed rate variety are within 10%, and accord with the JB/ T8748 1998, MIG/ MAG arc welding machine standard demands.

送丝速度变化率在三种情况下均小于10%，符合JB/T8748-1998，MIG/MAG弧焊机标准要求。

The types of MIG works cover, hotel, commercial building, office town , residential buildings and villa etc.

公司作品包括酒店, 商业建筑, 办公楼, 住宅别墅等.

In an effort to escape, the MiG pilot descended at maximum speed.

米格飞行员驾机以最快速度俯冲,试图逃跑.

The study demonstrates that the laser-MIG hybrid welding is an effective welding process for magnesium alloy.

因而激光?MIG复合焊接是镁合金焊接的一种有效方法.

Research on pulse thyristor MIG welder SCR Inverter Welding Machine Control System

晶闸管脉冲MIG焊机的研制晶闸管逆变焊机控制系统的研究

Al-alloys have special requirements on MIG welding due to their unique physical and chemical properties.

铝合金因其独特的物理、化学性能对MIG焊有特殊的要求.

The paper focuses on component part of digital pulse MIG welding inverter power. Main circuit, control circuit, pulse width modulation ( PWM) circuit, drive circuit and wire feeding circuit are respectively analyzed.

论文还重点介绍了数字化脉冲MIG焊软开关逆变弧焊电源的组成结构，并分别就软开关逆变焊机的主电路、控制电路、保护电路、驱动电路以及送丝电路做了详细的分析。

You have to drive the famous MiG-29 fighter planes in air blow F 16 fighter!

你要驾驶着著名的米格29战机在空中痛击F16战机!

The effects of single-wire unitary pulsed metal inert-gas ( MIG), synergic pulsed MIG and double-wires tandem MIG welding processes on the microstructures and properties of high strength Al-Cu alloy welds were investigated.

研究了单丝单脉冲、单丝复合脉冲和双丝TandemMIG焊对高强Al Cu合金焊缝组织及性能的影响。

In the conventional MIG welding process this arc jumping phenomenon appears also at the time a globular transfer is converted into a streaming transfer.

在通常的熔化极气电焊中，当由颗粒过渡转变到射流过渡时也出现这种跳弧现象。

Their systems to meet the gas requirements of the protection of MIG welding performance requirements.

要求其系统满足气体保护熔化极电弧焊的性能要求.

The MiG then throttled back in an attempt to catch Risner off guard.

米格机接着减速,试图咬住不够警惕的雷斯纳.

Clear images of the MIG welding pool are obtained by using the technology of narrow band filter, which used to overcome the influence of strong arc light.

通过窄带滤光结构，有效地克服了弧光干扰，并获得了比较清晰的铝合金MIG焊熔池图像。

Features of AC pulsed MIG welding robot system

交流脉冲MIG焊接机器人系统的工艺特点