plunger

The plunger is seized in its guide ( sleeve ) .

拄塞在 导套 中咬住了.

The wellhead throttle valve is made up of nozzle, plunger-shaped spool, throttle value, valve body and valve rod, etc.

该井口节流阀由喷嘴、柱塞形阀芯、节流轴、阀体、阀杆等组成。

When the hand wheel rotation, through the stem-driven plunger in the middle from KER to bottom hole reciprocating movement to complete the valves open and close function.

当手轮旋转，通过阀杆带动柱塞在孔架中间上下往复运动来完成阀门的开启与关闭功能。

Push switch plunger inward to fully retracted position.

把开关柱塞向内推入到完全缩回的位置.

She depressed the plunger fully and pulled out the shot.

她松开了活塞然后拔出了针头.

Even if the plunger impurities have been mechanical strain can be washed clean of oil mill.

若柱塞偶件被机械杂质拉伤,可用清洁机油洗磨.

The clearance between plunger and barrel of a pump is a key parameter for the pump.

抽油泵的泵隙是抽油泵的一个重要技术参数.

Die Casting Machine Supplies: plunger head , cylinder, piston oil spray, and so on.

压铸机的耗材: 柱塞头,料管, 柱塞油,喷雾剂等.

Cock and ball 2.3.3 : headstock were plunger or ball, rotating around its own axis.

旋塞和球形: 启闭件是柱塞或球体, 围绕本身的轴线旋转.

Pull the pants down, stick it in me and push the plunger down.

把这个拉开拿这个靠着我,然后把管子拉下来.

He grinds the meat in electric grinder, pushing it into the hopper with a wooden plunger.

他把肉放在电动肉磨上, 用一个木头唧子推进了漏斗.

LL: I meant that we a choice about whether or not I use the plunger.

哦 ～,原来你说的inapinch是指我们别无选择的意思,要就用这个工具,否则就得请人来修.

Engin oil flow in air cylinder Application of the Combined Plunger-type Cylinder

汽缸活塞内润滑油流动的数值模拟柱塞缸组合的应用

Methods Fabricating tooth crown with well of plunger attachments, deciding the wearing path of dentures.

方法制作带有插销式附着体底座的基底冠,并通过平行研磨仪确定附着体的共同就位道.

Both systems use the spring or plunger instability against its counterpart to create the bias effect.

两种系统都使用弹簧或顶针相对于其配对体的不稳定性来形成偏置效果.

The solenoid plunger pulls the vent valve down, blocking off the passage to the charcoal canister.

电磁柱塞拉下通气阀, 堵住通向活性碳罐的通路.

The BZ 740 pump is a high pressure and large flow axial plunger pump.

740泵是铝型材挤压机普遍使用的一种高压、大流量的斜轴式轴向柱塞泵.

The solenoid plunger pulls the vent valve down, blocking off the passage to the charcoal canister. piston pin snap ring

电磁柱塞拉下通气阀，堵住通向活性碳罐的通路。活塞销锁圈，活塞销扣环

Fluid end is forged of quality steel and fabricated by machining center with various plunger sizes.

液力端采用优质合金钢锻造,由加工中心整体精密加工而成,可配置多种柱塞尺寸.

Plunger head chute different location, change the amount of oil in a different manner.

柱塞头部斜槽的位置不同, 改变供油量的方法也不同.

Consider an automation project that gathers wellhead data and controls the plunger lift cycles.

考虑一个自动化项目,网罗了井口数据,并控制了柱塞气举周期.

Reciprocating plunger seals have been substitute by mechanically or hydraulically actuated diaphragms in diaphragm pumps.

往复活塞密封被机械密封和液力隔膜泵所替代.

So as to enhance the life of the plunger valve.

从而提高了柱塞阀的使用寿命.

Plunger pump in the steering system bring fluid pulsation, there out pressure pulsation in subsequence system.

本文分析了某船舶操舵系统噪声产生的原因及机理, 进行了降噪措施的理论研究.

The paper deals with the theoretical calculation of reciprocating seal for three plunger pump.

本文叙述了对三柱塞泵往复密封的理论计算.

One effective way is preferred pump barrel and plunger of materials and surface treatment processes.

其中一个有效的方法就是优选泵筒和柱塞的材料和表面处理工艺.

The cylinders are made of super-hard metal ( plunger hardness above HRC55), and sealed with low-resistance stepped gaskets, giving no oil-leakage, long service life and low maintenance cost.

液压缸采用特殊超硬材料，柱塞硬度达HRC55以上，密封采用低阴力阶梯圈，无漏油，使用寿命长，保养成本低；

Main oil vat: Adopt plunger type cylinder ( Germany technology ).

主缸: 采用柱塞式油缸 ( 德国技术 ).

Plunger shaft adopts integral structure, making installation easier and more reliable.

柱塞轴芯采用了整体结构, 使安装更加方便可靠.

The plunger retraced at once.

柱塞即缩回.