pro-E

In this paper, model of Pro-E and ADAMS of the engine with new multi-link mechanism is set up using dummy prototype technology.

运用虚拟样机技术对所提出的一种用于内燃机的新型多杆机构建立了Pro-E以及ADAMS模型。

The sampling hole and the location of the pressure sensor bushing were redesigned through 3-dimension simulation with Pro-E. The fine thread and sealing gum of high temperature resistant were utilized for airproof.

论文研究工作主要内容如下：1、对取样孔及压力传感器衬套位置进行重新设计加工，在设计过程中利用了Pro-e的三维设计功能，应用细牙螺纹与高温密封胶，保证了压力传感器衬套的密封；

Using software PRO-E to build the model of the impeller 、 diffuser with blade 、 entering air elbow 、 volute.

用PRO-E软件对进气弯管，带分流叶片的叶轮及有叶片扩压器进行了实体建模。

Research of application of Pro-E in teaching of machine tool jig design

Pro-E在机床夹具设计教学中的应用研究

With the use of Pro-E, it is easy the solve the problems of reciprocation and intervention and develop the mechanical system of the combined type and exposition design pattern.

用Pro/E三维造型对多方案综合集成进行了研究，很好地解决了可互换性和运动干涉等问题，设计研制出具有多方案组合、开放型的机械系统。

Creating the 3D Solid Model of Helical Gear Based on Pro-E

基于Pro-E的斜齿圆柱齿轮三维实体造型

In this chapter, mechanical construction and thermal set architecture of the light engineer are simulated in PRO-E from.

⑷设计了光轮旋转体的机械构造和散热风扇结构PRO-E设计模型。

Designing Complicated Curved Surface of Fuel Tank at Computer Work Station by Means of Pro/ E

用Pro/E在工作站上进行油箱复杂曲面的设计

The key technique and process of CAD/ CAM are analyzed based on design of brake shoe boring-machine. The application of PRO/ E to auto brake shoe boring-machine is discussed.

从汽车制动蹄片镗削机设计出发，分析了CAD／CAM的关键技术及过程，阐述了PRO／E在汽车制动蹄片镗削机设计中的应用基本方法。

Use a widely used software Pro-e to draw the part model and assemble into equipment model.

使用应用广泛的Pro-e软件，绘制出零件模型，并组装成部件。

Three-dimensional Entity Simulation Research of Aviation Arc Face Gear Based on Pro-E

基于Pro-E的航空弧齿面齿轮的三维实体仿真研究

With rich experience in designing and advanced3D design software like CATIA, PRO-E and so on, we've been successful in the market.

丰富的设计经验，先进的设计流程，国际先进的3D设计软件（CATIA、PRO/E等）及先进的计算机手段为我们赢得了市场。

A Pro/ E-based 3D parametric modeling and design method for anchor shank tension meter is proposed. Some problems that must be paid attention to be pointed out, and some key techniques are discussed.

提出了基于Pro/E的锚杆拉力计三维参数化设计方法，对造型设计中的技术要点进行了探讨，指出了应当注意的问题。

Using Pro-E software to build a three-dimensional model to DEFORM-3D finite element analysis software for the platform, the production of drill steel drill blanks to roll from the cogging to rolling 20 pass process was simulated.

利用Pro-E软件建立了三维模型，以DEFORM-3D有限元分析软件为平台，对钻孔法生产钎钢从开坯到精轧二十个道次轧制过程进行了数值模拟。

From vending machine doors closed parts requirements and assemble relations perspective, the use of software products Pro-E preliminary 3D design, the use of rapid prototype parts resin models, after the completion of assessment doors closed parts stereotyped design.

从自动售货机门封零件的要求和装配关系出发，利用Pro-E软件对该产品进行了初步的三维设计，利用快速原型制作了零件的树脂模型，经过评估后完成门封零件定型设计。

Secondly build the complex rigid-flexible and hydro-mechanical model by the software of ADAMS, ANSYS and PRO-E .

然后利用ADAMS 、 ANSYS和PRO -E 等软件建立了复杂的刚、柔性体机械模型和液压模型.

A numerical analytic system based on the real three-dimensional geometry structure and powerful commercial software such as STAR-CD, Pro-E, Pro-am' was established in this thesis for the study of the internal flow and the optimization of the geometry structure of the combustion chamber.

本文利用STAR-CD等软件为基础建立了一个基于完整真实的三维几何结构的燃烧室内部流动数值分析平台；

The thesis also uses PRO-E to analyzing the gear-cam composite and gear-pole composite mechanism by the modeling and simulating design.

本文还运用PRO-E对齿轮-连杆组合型托料机构以及自行设计的齿轮&凸轮组合型托料机构进行了建模和运动仿真。

This article determines the transmission chain in the arch structure and selects standard components, designs the structural including some structural optimization by Pro-e and ANSYS tools, makes a mechanics analysis of the structure.

本文首先在开始部分确定拱架的传动链，并对相关标准元件进行了选型；随后利用Pro/E，ANSYS等工具进行结构设计和部分结构优化；最后对拱架结构做了部分力学方面分析。

The article study preliminary other code that CAM creates. This system can read the codes directly and convert them into the code format of this system, and call the UG, Pro-e, AutoCAD and other CAD system in auto-programming system.

对其它CAM生成的代码进行了初步研究，本系统可直接读入代码，转换为本系统的代码格式，并实现在自动编程系统中调用UG、Pro-e、AutoCAD等CAD系统。

This paper article briefly discusses the technology of the virtual prototype, 3 dimension modeling tool ( Pro-e), dynamic simulation software ( ADAMS), the program of the virtual prototype research.

简述了虚拟样机技术、三维建模工具Pro-e和动力学仿真软件ADAMS以及虚拟样机开发的流程；

In implementing process, opened sufficiently up relevant functions of UG and Pro-E software, realized CAD/ CAM integration. It mainly focuses on solving the problem of CAM post processing and data communication etc.

在实施过程中，充分开发UG、Pro-E软件的相关功能，实现CAD／CAM一体化，重点解决了CAM后置处理、数据通讯等难点问题。

3D-Modelling, and Simulation Analysis for the Milling Machine'S Aggregate Transportation Mechanism Based on Pro-E/ ADAMS

基于Pro-E/ADAMS的路面铣刨机集料输送机构的三维建模与仿真分析

Application of PRO/ E to the design of auto brake shoe boring-machine

PRO/E在汽车制动蹄片镗削机设计中的应用

Application of Developing Hot Exchangers with Pro-E

Pro-E在换热设备研发中的应用

The Analysis on Extruding Taper Screw Based on Pro/ E and ANSYS

基于Pro/E与ANSYS的挤压膨化锥形螺杆分析

The Bevel Gear ′ s Modeling Scheme with the Spinal Bend feature Based on PRO-E

PRO-E中的直齿锥齿轮骨架折弯建模方案

In this paper through establishing a Pro-E emulation model of 6-Dof robot, the structure optimizing design is adapted. The dynamics analysis is also carried through based on ADAMS emulation model which is equal to the dynamics model of the upper arm.

针对六自由度点焊机器人设计过程中的动力学问题，通过建立Pro-E仿真模型，及其与大臂机械动力学模型等价的ADAMS仿真模型，在此基础上进行其动力学分析。