resin adhesive

Initial Study of the Surface Active Function of Oleic Acid for Phenol Aldehyde Resin Adhesive

油酸对PF树脂胶粘剂的表面活化作用初探

The epoxy resin adhesive is one of the most important adhesives in auto industry, especially for car body shop. It is wildly used for a series of high strength products just like spot welding adhesive and structure adhesive.

环氧树脂胶粘剂是汽车工业中特别是车身所用的重要胶粘剂之一，它广泛地用于点焊胶、结构胶等一系列高强度的产品中。

Development of Low Toxic Urea-formaldehyde Resin Adhesive for Particleboard

碎料板用低毒性脲醛树脂的研制

Experiments show that UF Resin Adhesive with better properties can be obtained by employing this method.

实验表明,采用本方法制得的脲醛树脂胶粘剂各项性能优良.

Lowing the production cost of urea-formaldehyde resin adhesive by adjusting the technological conditions

调整工艺条件降低脲醛胶生产的操作成本

This paper introduces a polybasic polycondensated resin adhesive.

提出了一种多元共缩聚树脂胶粘剂.

The Study on Water based Adhesive ( WP) Used to Laminate Paper and Polymer Film THERMOSETTING RESIN FOR HIGH PERFORMANCE COPPER CLAD LAMINATE

水基冷贴纸塑复合胶（WP）的研制高性能覆铜板用热固性树脂

Factors affecting product quality of urea formaldehyde resin adhesive were analysed in details.

详细地分析了影响改性脲醛树脂胶粘剂产品质量的各种因素.

The melted thermoplastic adhesive after reaction in preforms will format more distribution of film groups on the fiber surface adhesion, and thus resin flow permeate better faster and easier than before reaction.

预型件内的热熔性粘合剂反应融化后会形成团片粘附在纤维束的表面，分布也更加离散化，从而树脂流动渗透比融化前的效果要好、浸润更快更容易。

Development of a General-Purpose Non-structural Improved Chloroprene Rubber/ Phenolic Resin Adhesive

改性氯丁/酚醛非结构型通用胶的研制

Methods of testing bamboo-mat plywood The Application of Low Moles Proportion UF Resin Adhesive to Bamboo Particle Boards

GB/T13124-1991竹编胶合板试验方法低摩尔比脲胶在竹材碎料板中的应用

He product based on phenolic resin as adhesive with mineral filler and other additives is processed into thermosetting plastics.

本产品以酚醛树脂为粘合剂，加入矿物填料及其它添加物而制成的热固性塑料。

Besides, thermodynamic analysis was made to the curing reaction of glucose-phenol resin adhesive by TGA and DSC, Kissinger equation and Crane equation were used to calculate the dynamic parameters of the curing reaction.

除此以外，我们还通过TGA、DSC对葡萄糖苯酚树脂的固化反应进行了热力学分析，利用Kissinger方程和Crane公式计算了树脂固化反应的动力学参数。

PF resin adhesive by mid-temperature curing is made on the main condition that the "cold-in and cold-out" technique used for bamboo curtain plywood should be changed into a "hot-in and hot-out" one.

将竹帘胶合板的“冷进冷出”工艺改造成“热进热出”工艺，关键技术是降低热压温度，而一种中温固化型的酚醛树脂是实现该技术的主要条件。

In pro-during PF resin we add amino resin and someadditives, the polycondensated resin adhesive.

该胶粘剂是在苯酚和甲醛制造酚醛树脂过程中, 加入氨基树脂及添加剂共缩聚而成.

Progress in the Study on Low Toxicity Modifiers for Urea-formaldehyde Resin Adhesive

脲醛树脂胶黏剂低毒化改性剂研究进展

Study on preparation of phenol-formaldehyde resin adhesive with wood tar oil instead of a partial phenol

木焦油部分替代苯酚合成酚醛树脂胶粘剂的研究丁腈酚醛树脂粘合剂

In this paper, epoxy resin adhesive modified by polysulfone is studied.

研究了聚砜改性环氧树脂胶粘剂.

Inorganic adhesive H3PO4 CuO is presented for replacing phenol aldehyde resin adhesive in preparing diamond grinder.

采用无机粘结剂H3PO4CuO取代酚醛树脂粘结剂，制作树脂磨具。

The phenol-formaldehyde resin adhesive has good application value and wide application range.

性能的改善提高了酚醛树脂胶粘剂的应用价值,扩大了其使用范围.

The properties of pyrite cinder cold-bonded pellet manufactured with cement and phenolic resin adhesive were studied.

研究了水泥复合酚醛树脂胶粘剂对制备黄铁矿烧渣冷固球团性能的影响.

This shows that in the high temperature cycle, salt, high temperature water environment and ultraviolet radiation, the bond strength of Epoxy Resin adhesive both are relatively stable.

这说明环氧树脂类粘结剂在高低温循环、盐雾、高温水环境、紫外光的照射下，其粘结强度都比较稳定。

Adding different amount of urea-formaldehyde ( UF ) resin in phenolic ( PF ) resin, the combined adhesive was obtained.

以酚醛树脂 ( PF ) 为基础,与不同加量的脲醛树脂 ( UF ) 复合, 形成一系列复合胶粘剂.

The optimum reaction conditions for preparing cashew phenol aldehyde resin adhesive by cashew oil instead of phenol aldehyde were investigated.

研究了用腰果油部分替代苯酚制备腰果酚醛树脂胶的最佳反应条件。

Preparation and Properties of the Room Temperature Rapid Curing Epoxy Resin Adhesive

室温快固化环氧胶的制备技术及性能研究

Research of a New Epoxy Resin Adhesive for FCCL

一种新型挠性覆铜板用环氧胶粘剂的研究

Moreover, the application prospect of hyperbranched epoxy resin was also introduced in thermoset material, adhesive and solventless resin fields.

提出了超支化环氧树脂在热固性材料、胶粘剂和作为无溶剂树脂等领域的应用前景。

And it was discovered that the concentration of exonerative formaldehyde of the urea-formaldehyde resin synthesized reaches the F1 target of environmental protection, the initial adhesive force and gluing intensity is up to the national standard, but the cost of the resin is reduced obviously.

实验结果表明，合成脲醛树脂的甲醛释放量达到F1环保指标，初始黏结力、胶合强度等综合指标均符合国家标准，成本则有较大降低。

The Adhesive aluminium foils packaging for medicine was formulated with polyester resin, VMCH resin, solvents etc.

采用聚酯树脂 、 VMCH树脂 、 溶剂等制成TPT药品 包装用铝箔粘合剂.

Polyphenols-formaldehyde resin, a new thermosetting adhesive, is developed by Guizhou Research institute of Chemical industry, its analytical method for free phenol and aldehyde is discussed in the article.

多元酚&甲醛树脂是本院开发的热固型粘接剂新产品，本文给出了这一产品技术指标中游离酚、游离醛含量的测定方法，并对方法进行了讨论。