response surface

A response surface method ( RSM ) for structure reliability analysis of solid rocket motor ( SRM ) grain was presented.

发展了一种固体火箭发动机药柱结构可靠度分析的响应面法.

Based on the results of one-factor-at-a-time ( OFAT) experiment, central composite rotatable design ( CCRD) according to the principles of response surface methodology ( RSM) was carried out to optimize the enzymatic hydrolysis process.

在单因子实验的基础上，利用响应曲面法中的旋转中心组合设计对水解工艺进行了优化。

This optimizing medium was obtained by Response Surface Analysis ( RSA).

采用响应曲面设计法，通过拟合回归方程得到了一个优化的培养基。

Optimization of Cellulase Production by Aspergillus niger Using Response Surface Methodology

响应面法优化黑曲霉产纤维素酶发酵条件

The error of kriging and polynomial response surface models for approximating car door side impact response is contrasted. The research shows that kriging is presented as an alternative method for constructing car door structural crashworthiness approximation.

对比分析Kriging和多项式响应面两种近似模型对于车门侧撞响应的拟和误差，表明用Kriging模型构建车门抗撞性近似模型是合适的。

Study on the Optimization of Film Coating Technology of Chinese Patent Tablet With Response Surface Method

响应面法优化中药片剂薄膜包衣工艺研究

Considering the unsteadiness of local velocity and viscosity as well as the torques of lade surface, shift surface, blade top and edge. A new response equation for spinner flowmeter in multiphase flow is presented.

考虑叶片表面、叶片顶端与边沿阻力矩及粘度、流速的影响，提出了涡轮流量计在多相流动中的响应方程。

Response surface method of reliability sensitivity analysis for accessory gearbox outlet temperature

附件机匣出油口温度可靠性灵敏度分析的响应面方法

Application of response surface method in impacting energy absorption of thin-walled structure

响应面法在薄壁结构碰撞吸能上的应用

Optimization of Bacillus licheniformis L3 Fermentation Medium by Response Surface Method

地衣芽孢杆菌L3发酵培养基的响应面法优化

A sequential response surface method with various f and a criterion of convergence are proposed for calculation of structural reliability analysis.

提出了结构可靠度分析的变f序列响应面法和相应的收敛控制准则，并应用于非线性极限状态函数的可靠度计算。

Optimization of Blanching of Quickly Frozen Purple Sweet Potato by Response Surface Method

响应曲面法优化速冻紫甘薯的烫漂工艺

EAG response was studied to egg and the hexane extract to the surface of eggs.

用触角电位法研究了棉铃虫触角对其卵和卵表正己烷提取物的电生理反应.

To get a good response surface is very important to find the optimal value.

能否得到好的未知曲面近似,是寻找最优解条件的前提.

Optimization of Microwave-assisted Extraction of Oil from Paeonia suffruticosa Andr. Seeds Using Response Surface Analysis

响应面法优化微波提取牡丹籽油的工艺研究

According to the basic rules of response surface method and center utilized design method, response surface model for performance evaluating of electrode heat convection is built. Leading in the variance analysis and F test, validation of model significance is done.

根据实验回归分析的响应面法和中心组合实验设计法的基本规则，建立面向冷却率的电极对流换热性能评价的响应面模型，并引入方差分析和F检验，验证模型的显著性。

Main conclusions are described as follows: 1. The dynamic response of cast-in-situ concrete thin-wall pipe pile composite foundation reactes strongly on the horizontal ground surface, and gradually decreases from the centre of the reinforced area to the marginal zone.

论文主要结论如下：1.现浇混凝土薄壁管桩复合地基地表水平向动力反应强烈，由加固区中心向边缘逐渐递减。

Response Surface Analysis ( RSA ) was applied to optimize the extraction of the total flavonoids Semen Litchi.

利用响应面 分析法 优化荔枝核总黄酮提取工艺.

Optimization of process of Mozzarella cheese with soy milk by Response Surface Methodology

响应曲面法优化含豆乳的Mozzarella干酪的生产工艺参数

Optimization of microencapsulation process of arachidonic acid by response surface analysis

响应面法优化花生四烯酸微胶囊工艺的研究

The optimization technology are obtained using the method of response surface experiments, the freezing time is 23.56 h, the freezing temperature is-20 ℃ and the ratio of liquor to material is 8.73 ∶ 1 ( V/ m).

经响应面分析优化得到了最佳工艺条件为：温度为-20℃、冷冻时间为23.56h、液料比为8.73∶1（V/m）。

Initial review study identified the central composite rotatable design ( CCRD) method as an appropriate method for efficient experiment design within the context of response surface calibration.

初步的预分析结果表明，中心复合旋转设计方法可以满足本项目的精度要求，而且具有相当高的工作效率，所以该试验设计方法被采用。

Combining Monte Carlo simulation with finite element method, this paper gives a way to analyze the probability of the deformation stability of foundation pit. Response surface method is employed to improve the calculation efficiency of direct Monte Carlo simulation technique.

将Monte Carlo模拟法与有限元技术结合，对基坑变形的稳定性进行可靠度分析，并通过重构响应面来提高Monte Carlo模拟法的计算效率。

The proposed approach can provide a satisfactory presentative model at improved computation speed ofthe selection of the response surface function approximation.

所提出的方法，以改善的计算速度，为响应表面函数近似的选择提供了一个满意的模型代表。

Optimization of extraction technology of phytic acid from cottonseed meal by response surface method

响应曲面法优化棉籽粕中植酸的提取

This research applies central composite design and response surface methodology to optimize the process parameters of SEBS modified asphalt.

本研究应用星点设计效应面优化法对SEBS改性沥青工艺进行优化。

Study on Optimizing the Cured Fish Technology Based on the Response Surface Methodology

基于响应面分析法优化腌鱼工艺研究

Optimization of herb tea beverage of permeating citrus's aroma and jujube savor by response surface analysis

响应面法对橘香、红枣花草茶饮料的优化研究

Optimization of Technology for Extracting Ammonium Oxalate From Bombyx Batryticatus Using Response Surface Methodology

采用响应面法优化白僵蚕草酸铵的提取工艺

The acute inflammatory response disappeared gradually in 4 weeks with the traits that heterophil granulocyte disappeared and lymph-cell reduced, and there was compact fibrous capsule formed on the material surface of the tissue. Inflammatory response lowered to grade 2 and the capsular reaction to grade 3.

4W以后急性炎症反应逐渐消失，表现为中性粒细胞逐渐消失，代之以少量的淋巴细胞，组织-材料界面有致密的纤维囊腔形成，炎性细胞反应为Ⅱ级，囊腔反应为Ⅲ级。