servo motor

Said motor control part includes a digital motion controller, an interlinkage modular, a manual speed control encoder, a servo driver and a servo motor.

所述的电机控制部分包括数字运动控制器、互连模块、手动调速编码器、伺服驱动器及伺服电机；

In the past for a long time, step motor to take up a large market, but China is gradually replaced for servo motor.

在过去很长一段时间里，步进电机占很大的市场，但目前正逐步为伺服电机所取代。

Motor driver board is connected directly with the two motors, including DC servo motor driver circuit, DC step motor driver circuit and over-current protection circuit.

电机驱动板是系统直接连接两台被控电机的执行部分，主要包括直流伺服电机驱动电路、步进电机驱动电路和过流保护电路。

Thermal Protection and Its Application of Brushless Servo Motor Based on Analogous Theory

基于相似理论的无刷伺服电机发热预测及应用

The experimental results reflect that the output power of the AC servo motor changes periodically and the actual values of the average load power coincide well with the theoretical values of it.

试验结果表明：冲箱式造波机在造规则波的过程中，其交流伺服电动机的轴端输出功率，呈周期性变化，且电动机的平均负载功率实测值与理论计算值吻合较好。

The electro-hydraulic servo system and motor-servo system for the chamfering feed control were separately illuminated.

根据不同的进给伺服系统阐述了倒棱机进给控制的电机伺服系统和电液伺服系统结构.

Closed servo control technology is adopted to realize multiple motor stepless speed regulation.

电机控制采用闭环伺服控制技术，实现多路电机的无级调速。

This paper describes hardware configuration based on PC DC servo motor performance testing virtual system.

介绍了基于PC的直流伺服电机性能测试虚拟系统的硬件组成,测速和测功方法,系统的功能及关键技术.

The precise location of reflection probe is completed by operation of servo motor controlled by software. Then by applying Visual Basic 6.0 with application program in PNA, we complete the program of the measurement software.

其中，利用控制软件控制伺服电机的运行，完成反射棒的精确定位；使用VISUAL BASIC6.0并结合矢量网络分析仪自带的应用程序来完成测量软件的编译。

Tighten the N coupling nut on the AC servo motor side temporarily.

临时拧紧马达边的N型连接螺母.

Through analyzing the voltage-speed characteristic of servo motor speed control system and the flow characteristics and force equilibrium equation of the pump-cylinder system, the dynamic mathematical model of the actuator is established.

通过分析伺服电动机调速系统电压-转速特性及双向齿轮泵控双出杆对称液压缸的流量特性和力平衡特性等，建立了DDVC电液执行机构的动态数学模型。

At this time, servo motor control system to into our line of sight.

这时，伺服电机控制系统就进入了我们的视线。

AC servo motor control board-forward, stop, and ensure the nail-distance and accuracy.

交流伺服马达控制纸板前进 、 停止, 保证钉距的均匀、精确.

Based on the three-dimensional servo tracking system of carrier-based satellite antenna, the azimuth angle, elevation angle, and polarization angle of antenna were controlled through two-dimensional motor driver mechanism.

基于舰载卫星天线三维伺服跟踪系统，通过二维电机驱动机制控制天线方位角、俯仰角和极化角。

Mill spindle is used by either inverter or servo motor.

铣床主轴采用变频马达或伺服主轴.

Upgradation of feeding system of lathe by servo motor

用伺服电机改造车床的进给系统

The features and developing trend of NC alternating current servo motor

数控交流伺服电动机的性能特点及发展趋势

Feeding system adopts CNC servo motor, bending angle uses CNC control.

采用数控伺服电机进料系统，数控折弯角度控制系统。

This project that used indus-trial personal computer, PCI-1720, PCL-836 card, servo driver, servo motor to constitute a half closed loop servo-control system, so vibration of driver's chair is real-time controlled.

通过工控机、PCI-1720卡、PCL-836卡、伺服驱动器、伺服电机、电动缸等形成半闭环伺服控制系统，实现对驾驶员座椅的振动控制。

The mathematical model of AC servo motor is established at the base of kinematic analysis of parallel mechanism, and the fast terminal sliding mode controller is designed.

本文构建了2-DOF并联机器人控制系统，对并联机构进行了运动学分析，并在此基础上建立了交流伺服电机数学模型，设计了快速终端滑模控制器。

Application of gray-box identification in a new continuous rotary electro-hydraulic servo motor

灰箱辨识在连续回转电液伺服马达中的应用

Temperature Compensation and Revision System in Servo-motor ′ s Torque Measurement

伺服电机转矩测量的温度补偿修正系统

Double crank driving mechanism by shunt-wound electric motor and servo motor have been introduced which has been applied to structure design of precision press.

介绍了用一台常规电机和一台伺服电机组成的并联双曲轴驱动肘杆机构，并将其用于精压机的结构设计中。

DELTA AC servo motor and controller for precision to determine the long cut, full closed-loop control.

采用台达交流伺服电机及控制器实现精确定长剪切，全闭环控制。

Application AC servo motor in the withdrawal device of HCCM

交流伺服电机在水平连铸拉坯机上的应用

The movement is controlled by the PCL-832 card. The design of simple module is accomplished, which include PC, control card, servo driver, servo motor.

通过PCL-832控制卡实现运动控制：完成了插补程序的设计，PC机、控制卡、伺服驱动器、伺服电机作为一个简单模块设计。

Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.

采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。

It adopts equivalent PLC, positioning module, servo motor and frequency converter. Besides, its touch screen is featured with a humankind operation.

采用同等PLC及定位模块和伺服电机及变频器，触摸屏人性化操作、全自动调整。

SPD-100B type is a kind of low-speed machine, but it adopts equivalent PLC, positioning module, servo motor and frequency converter. Besides, its touch screen is featured with a humanized operation.

SPD-100B型虽为低速机，但采用与高速设备同等PLC、定位模块、伺服电机以及变频器，触摸屏人性化操作。

Apply Fractional Slot Winding into AC Sine Wave PM Servo Motor

分数槽在正弦波交流永磁伺服电动机中的应用