setpoint

Novel controller design for decoupling disturbance response from setpoint response

给定值和干扰响应解耦的新型控制器设计

The application of the encoder in vehicle speed examine system ( setpoint control) in introduced concretely.

具体介绍了光电编码器在车速检定系统（设定值控制）中的应用。

To save the new setpoint value and exit, press SETPOINT again.

若要保存新的设定值并退出，请再次按设定值。

Model of optimal temperature setpoint for air-conditioned room in Shanghai area

上海地区空调室内优化设定温度模型

When the altitude control senses a drop in level below the predetermined setpoint the valve opens to fill tank.

当水位控制器感应到水位下降到预置设置点以下时，则阀门开启，开始对容器注水。

To meet the requirement of high-pressure common rail fuel injection system, the control strategy and mode was designed and the setpoint fuel injection pressure was calculated according to engine operating parameters.

基于GD1高压共轨电控燃油喷射系统，设计了燃油喷射压力的控制策略，根据柴油机的运行参数计算目标喷射压力并选择相应的控制模式。

And it will be emphatically discussed that the managing procedures of the various unexpected events during the test, including temporary control change, setpoint change, unexpected events and design change.

并且着重讨论了试验过程中各种意外事件（包括临时控制变更和整定值变更、各种非预期事件及设计变更）的处理过程。

Fore-back and feedback system based on nephelometer can control the quality of water produced in the little range by setpoint.

基于浊度的前馈&反馈控制虽然在一定程度上解决了稳定性与控制精度之间的矛盾，能将出厂水质量控制在设置值附近。

Torque Balance Speed-Regulation System Based on Torque Setpoint Limit System for Spiral Welded Pipelines Electromotor

基于转矩给定限幅的螺旋焊管线电机转矩平衡控制调速系统

Simulation studies for the CSTR reactor indicate that predictive control based on either Hammerstein model can provide much better setpoint tracking and disturbance rejection than well-tuned PID controllers.

对CSTR反应器之仿真结果表明，基于上述两种Hammerstein模型的预测控制在定值与随动系统情况下均得到了比常规PID调节器要好的控制效果。

The creating of target gauge control model based on the setpoint of the exit thickness gaugemeter is discussed in this paper.

本文以轧机出口侧测厚仪目标厚度设定值为基准点，建立目标控制模型。

The master control unit can adjust dynamically setpoint of the secondary one according to the real-time control error. Consequently, the controller can eliminate control error quickly and stably.

一级控制单元根据控制偏差的大小，动态调整二级控制单元的设定值输入，从而能够迅速、稳定地消除控制偏差。

On-Line Tuning of Setpoint Softening Factor for Model Predictive Controllers

预测控制器设定值柔化因子的在线调整

In the CCS automatic primary air flow control module, that the flow setpoint function may be adjusted in the manner should be favorable.

在一次风煤比自动控制模块中设置偏差值可以减少磨煤机因失去火检或风量低保护引起的跳闸。

The Moldatherm 1100 Box Furnace is available with single setpoint or 16 segment programmable power controller.

1100度箱式炉需配单程序或16段程序控制的控制器一起使用.

The experimental results show that this control method can be appied to the On/ off electrohydraulic system to realize the fast, stable and precise setpoint control.

实验表明，智能时间次优控制适用于开关式电液系统，实现设定点位置的快速、稳定和精确的控制。

Now the process variable is equal to the setpoint, and the control loop should "sit still"& that is, produce no output change.

现在程序变量相当于定点，并且控制环静止不动，换句话说，没有产生输出变化。

The change of the value for "machine output setpoint" is not accepted.

不接受“压片机输出设定值”的改变。

, and discusses the automatic load change ( ALC) and remote oxygen setpoint adjusting ( ROSA) specially.

重点对自动变负荷控制（ALC）和远程氧设定调节（ROSA）系统进行了探讨。

Preset three user-selectable temperatures for rapid setpoint change.

用户可预设三个自选温度，以便实现温度的快捷转换。

PI Controller Performance Assessment Based on Setpoint Response Data

基于设定值响应的PI控制系统性能评估

Next, introduce the method of performance assessment based on minimum variance controller and setpoint response data.

其次介绍了基于最小方差控制和基于给定点输入输出数据的在线性能计算与性能评价方法的研究，并以具体的模型为对象进行了控制器性能计算的仿真实验。

The Temperature Setpoint Optimizing Control on Walking Beam Reheating Furnace

步进梁式加热炉温度最优设定控制

The requirement of control is of fast temperature rising, little overshoot and good steady state stability. The setpoint of temperature is often changed based on different experiment.

要求升温快、超调小、稳定精度高，而且根据不同的实验要求，其温度设定值经常变化。

Tube 1100 ℃ Mini-Mite Tube Furnace includes integrated digital control, single setpoint or multiple segment programmable.

1100度管式炉整体数码控制, 可选单段控制也可选多段控制.

The simulation result shows the good response of the system to the setpoint change and load disturbances.

仿真结果表明了其良好的跟踪及抗干扰性能。

The setpoint response controller is designed in terms of the robust control H 2 optimal performance specification.

基于鲁棒控制H2最优性能指标设汁给定值响应控制器.

In addition, this approach can be extended to deal with setpoint tracking, stochastic disturbance, structural mismatch and controller design and tuning.

另外，该方法还可以通过简单的拓展来处理设定值跟踪、随机扰动、结构失配以及控制器设计与整定等相关问题，具有较好的推广性能。

Design for some typical integrating and unstable processes with time delay shows that the proposed method can achieve good compromise between setpoint tracking, disturbance rejection and stability robustness.

针对某些典型的积分和不稳定时滞过程的设计表明所提方法能获得较好的扰动抑制和稳定鲁棒性的均衡。

Modeling and Temperature Optimal Setpoint Strategy for Walking Beam Reheating Furnace

步进式加热炉建模和炉温优化设定策略