sliding form

Analysis about Troubles on Sliding Channel Form Brake Beams on Freight Cars

货车滑槽式制动梁故障分析

The probe and practice for the sliding form technology of the linking silo structure

连体筒仓结构滑模技术的探讨与实践

Design and Construction of Sliding Form Raising System on Circular Tube Wall

圆形池壁滑模提升系统设计与施工

In the overlying basalt, there is high dip and wide tension fissure zone, which is combined with surface of unconformity which is as basal sliding face, to form loosening rock mass.

在上覆玄武岩层中见有高倾角的宽张裂隙带，与不整合面一起构成松动岩体，不整合面为底滑面。

Study on a Computational Method of Lateral Pressure on Sliding Form

滑升模板侧压力计算方法的探讨

Study on construction technology of sliding form for 40 ℃/-20 ℃ concrete

40℃/-20℃混凝土滑模施工技术研究

In this paper, flume experiments are carried out to observe the sliding course of gentle-slope seabed, which exhibits as local superficial soil body, acted upon by the shearing actions of wave peak and wave trough, sliding downwards to form sheet flow.

论文研究利用水槽试验手段，观察得到缓坡海底滑动过程，表现为浅表局部软弱土体在波浪波峰波谷的剪切作用下发生成层运动并向深处发展的滑动；

By adopting some technical countermeasures: optimum seeking concrete material, improving sliding form construction technique and concrete maintain technique and strengthening concrete quality control, it may decrease concrete face plate crack.

通过对混凝土原材料优选，混凝土配合比优化及抗裂性能比较，改进滑模施工工艺和混凝土养护工艺，加强混凝土质量控制等技术措施，达到了减少混凝土面板裂缝发生。

Discussion of Installation Survey Method for Track of Curved Sliding Form

曲线滑模轨道安装测量检查方法的探讨

Composition of two-way sliding form and construction technology for round concrete tank

圆形混凝土池双向定型滑模的构造及施工技术

In this article, author introduce the same diameter reinforced concrete digestion pool of Zhengzhou sewage treatment plant by the aid of sliding form construction continuously pouring concrete, exalt efficiency. Though functional test in accord with design, guarantee engineering quality and get better effects.

本文阐述了郑州污水处理厂等直径钢筋混凝土消化池，采用滑升模板施工，连续浇筑混凝土提高工效，经过满水和闭气试验，符合设计要求，保证工程质量取得较好的结果。

Study of the Construction Technique on C60 High strength Concrete Using Sliding Form

C60高强泵送混凝土滑模施工技术研究

Based on the mathematical model of the permanent magnet synchronous motor, the sliding surface form according to the error between measured current and observational current, using observed back EMF to calculate estimated speed/ position.

基于永磁同步电机的数学模型，根据实测电流和观测电流之间的误差构成滑模面，应用观测得到的反电动势计算出估计的转速/位置。

By the construction in silo of Huiquan Brewage Group Inc., this article detailed introduces the construction technique of the sliding form uniformly.

本文以惠泉啤酒集团筒仓工程为例，详细介绍了群体滑模施工工艺。

If inflation expectations, and risky asset prices, keep sliding, then some form of qe3 becomes possible.

如果通胀预期和风险资产价格继续下行，才有可能实施某种形式的qe3。

An adaptive sliding mode tracking controller based on fuzzy identifications for automatic position control ( APC) in cooling mills is studied. In the case of the unknown precise model, dynamic fuzzy logical system ( DFLS) is introduced to form the sliding mode controller.

基于模糊自适应控制方法设计了轧机厚控APC（Automatic Position Control）的滑模跟踪控制器，在系统动态函数未知的情况下，运用动态模糊逻辑系统DFLS（DynamicFuzzyLogicSystem）以及自适应机构构造变结构控制；

Design and Application of Integral Sliding Form Technique for Group Silos

群体筒仓整体式滑模技术的设计与应用

The design, construction method and the concerned problems of sliding form were introduced here.

为此，介绍其滑模的设计，施工方法及应注意的问题。

Dynamic response of sliding structure subjected to earthquake ground motions are calculated with a high order precise direct integration method, and the numerical results are presented in maximum acceleration response spectra of superstructure and maximum sliding displacement response spectrum form.

并利用高精度的精细时程积分法，通过对地震作用下S-LF动力响应的计算，绘制了上部结构最大加速度反应谱和基底最大滑移量反应谱，并研究了各种结构参数对隔震的影响；

Research on integral construction form considering cable sliding of tensioned membrane structures

张拉式膜结构考虑索滑移的整体施工成形分析

Winter sliding form construction technique of high-strength pumping concrete of a high-rise building

超高层建筑高强泵送混凝土冬期滑模施工技术

UNILATERAL SLIDING FORMWORK TECHNOLOGY FOR CONSTRUCTION OF A DEEP WELL PUMPING STATION PROJECT Study of the Construction Technique on C60 High strength Concrete Using Sliding Form

深井泵房单面滑模施工技术C60高强泵送混凝土滑模施工技术研究

Aiming at continuous linear time-invariant system with network-induced delay, its network-based sliding-mode controller is designed and the corresponding closed loop form of the networked control system is established.

针对一类具有网络诱导时延的连续线性时不变被控对象模型，设计其网络滑模控制器，建立基于网络滑模控制器的闭环控制系统模型。