solid model

This new model of drilling machine can bore through solid rock ten metres deep.

这台新型钻机能钻透十米厚的坚固岩石.

According to calculated data, combined with three-dimensional design software CATIA, they established the three-dimensional solid model of the system.

根据计算得到的相关数据，结合三维设计软件CATIA建立该系统中机械结构部分的三维实体模型。

Creating the 3D Solid Model of Helical Gear Based on Pro-E

基于Pro-E的斜齿圆柱齿轮三维实体造型

This paper also studies on three-dimensional solid model of honer.

本论文也对珩太原理工大学研究生论文齿刀三维实体模型进行了研究。

Transformation from 3D solid model to 2D schedule drawing

三维实体模型向二维工程图转化

Design of tower crane steel structure based on 3 D solid model

基于三维实体模型的塔式起重机钢结构设计

A standard linear solid model ( kelvin model) was used to fit the experimental data.

同时以标准线性固体模型对实验数据进行了拟合。

Firstly, parametric model of three three-dimensional complex groove milling insert is formatted by ANSYS' inner developing tools ( ANSYS Parametric Design Language, APDL and User Interface Design Language, UIDL), which provides solid model for finite element analysis.

首先，利用ANSYS的内部开发语言APDL和UIDL建立了三维复杂槽型铣刀片的参数化模型，为有限元分析提供了实体模型。

The representation and abstract method of the feasible clamping face of a part from the solid model are proposed.

本文提出基于实体模型的工件的可行夹紧表面信息的提取与表示方法，从零件信息中提取可行的装夹表面信息；

This paper detects the boundaries using wavelet transform method, and recognizes the inside and outside boundaries of ICT image of assembly parts based on simple loops, this algorithm can be applied to reconstruct solid model and analyze the shapes of assembly parts.

用小波变换提取装配体ICT图象中的边界轮廓，提出基于简单环识别装配体ICT图象的内外边界，该算法可用于装配体的结构形状分析并能正确地建立实体模型。

In order to establish the 3D solid model of pipelines, the parameterized solid models of related joints in Pro/ E were established at first to facilitate the aided design and automatic pipeline generation. ( 3) 3D pipeline generation.

为了建立三维管线实体模型，首先在Pro/E中建立了相关接头的实体参数化模型，方便辅助设计和自动生成管线。（3）三维管线的生成。

On the base of exact analysis offeree for the double crank ring-plate-type cycloid drive, we building 3-D solid model and drawing the CAD paper for the double electromotor drive the double crank ring-plate-type cycloid reducer.

在双曲柄环板式针摆行星传动准确受力分析的基础上，对双电机驱动双曲柄四环板式针摆行星减速器进行三维建模并绘制CAD图纸。

Based on the laws, one model of solid flow-rate was founded by developing relation of thermal balance around probe and tested.

在此基础上，利用探头温度径向影响区域规律和热平衡关系建立了固体流量测量模型。

Bridge deck pavement dead load case and live load conditions case analysis of a three-dimensional solid model, through The finite element software calculated were compared with test data. then obtained in each condition of stress law changes.

分析中建立三维有限元模型，通过有限元软件结合试验测试数据进行对比分析，进而得到在每个工况下的应力表现。

Theoretical model of drag between gas and solid phase

一个气固两相流动阻力的新模型

A thermochemical study on the establishment of solid model of Lewis acidity

硼酸和γ-氧化铝作为Lewis酸性固体模型物的热化学研究

Meanwhile, the solid model can be used to do some gear geometric analyses.

同时，可用实体模型对齿轮进行几何分析。

Constant Temperature Remote Control System for Solid Rocket Engine Pushing Core Model

固体火箭发动机插芯恒温远程控制系统

3-D SOLID Model of Finite Element Simulation Analysis in Thermal Deformation of CBGA Assembly

CBGA组件热变形的3-D SOLID模型有限元分析

Thermal relaxation regularities that consistent with the Arrhenius relationship are observed in the low-frequency experiments. Introducing the thermal relaxation regularities into the standard linear solid model, the thermal relaxation model with effects of both frequency and temperature is obtained.

由低频实验获得了符合Arrhenius关系的热弛豫规律，将其引入标准线性固体模型中，得到了同时含有频率和温度效应的热弛豫模型。

The porous material gas solid reaction model can be divided into continuum models and discrete models.

多孔介质的气固相反应模拟可分为连续模型和离散模型.

Based upon actual BOF , the e solid model is set up.

根据实际转炉建立实体模型.

Solid model is made for mudsill and bracket using I-DEAS, and finite element static analysis is carried out, on the base of terminal conditions setting for the overall structure and defined restrain.

利用I-DEAS软件建立了底梁及支架的实体模型，基于整体结构设定边界条件，定义约束，进行了有限元静力分析计算。

The corresponding computer programme is drawled up, the model bank of orebody block solid is established.

编制相应的计算机程序, 建立了矿块实体矿化模型库.

Fig. 1 Cluster model of amylopectin structure. Solid line indicate glucan chains.

图1支链淀粉结构的模型. 实线表示葡萄糖链.

This requires that the three-dimensional reconstruction model must be a solid model.

这就要求其重建模型必须是实体模型（Solid Model）。

Laser techniques is surging with LD-pumped solid-state laser. But, the stability, model and beam quality of the laser are strongly affected by the thermal lens effect at high power.

LD泵浦固体激光器出现使激光器得到飞速发展，但是其在大功率运行时所表现出的强烈的热透镜效应，严重影响了激光器的稳定性和输出光的模式、光束质量。

Theoretical Model of Drag Between Gas and Solid Phase in Circulating Fluidized Bed

循环流化床气固曳力模型

With this method, the matrix form of the3D viscous strain increment for the standard linear solid model is obtained; and the corresponding tensor form is derived, which can be also generalized tot.

首先，根据该代换下的标准线性固体三维黏性应变增量的矩阵形式，导出与之相对应的张量形式，进而推广得到常泊松比下一般黏弹性体三维微分型本构关系。

Solid model and its estimation method

实体矿化模型及其估值方法