temperature calibration

Experiments show that the outputs of the active noise source have interaction when the switch changed between the high and low temperature calibration noise sources.

通过实验发现，当开关在高、低温定标噪声源之间切换时，有源噪声源的输出会相互影响。

Furthermore, the fiber optic system was applied in temperature calibration and measurement, also good results were gotten.

此外应用该系统做了温度变化的标定与测量试验，同样结果较好。

Temperature Calibration in A Distributed Temperature Sensor System Based on Raman Back-Scattering

基于喇曼散射测温系统温度标定问题的研究

The Design of a Program Controlled Multifunctional High Temperature Calibration System

多功能程控高温标定系统设计

Physical Essentials and Design Considerations of Temperature Calibration for Distributed Optic Fiber Raman Temperature Sensing System

光纤拉曼测温系统的温度标定及设计考虑

Problem and Countermeasure of Multifunctional Temperature Calibration Device in Calibration and Application

多功能温度校验仪校准与使用中的问题与对策

Study on the Control System of High Accuracy Pressure and Temperature Calibration Device

高准确度压力和温度校准装置的控制系统研究

E the method of floating zero which is based on differential principle and floating coordinates and it is more appropriate for temperature calibration.

该方法以差动原理和浮动座标为基础，是实现温度校正较为理想的方法。

The effect of inverse radiation noise on antenna temperature calibration in the aperturecalibration method is expounded.

深入分析用口面定标方法反演微波辐射计的天线温度时过向辐射噪声对天线温度标定的影响。

A new temperature calibration technique using fixed points is appearing in recent years.

近年来出现了一种新的温度固定点校准技术。

The experimental system calibration includes three aspects: displacement calibration, temperature calibration and pressure calibration.

实验系统的标定主要包括三个方面的内容：位移标定、温度标定和压力标定。

The physical essentials of temperature calibration is revealed and its effect on system temperature accuracy is analyzed.

从该类系统的工作原理出发揭示了进行温度标定的物理原因及其对系统测温精度的影响程度。

The Stress Measurement of Bolts Using Ultrasonic Technique and Its Temperature Calibration

用于螺栓应力测量的超声技术及其温度修正

Research and Realization of Virtual Instrument System for Automatic Temperature Calibration

温度二次仪表自动校准虚拟仪器系统的研究与实现

Temperature calibration in a distributed optical fiber temperature sensor system based on Raman back scattering was discussed.

主要研究了基于后向喇曼散射分布式光纤测温系统的温度标定问题。

Uncertainty Analysis of Temperature Calibration of CTD in Lab

CTD温度实验室校准结果不确定度的分析

The temperature calibration system based on virtual instrument is developed by combining virtual instrument and the technology of temperature calibration in this paper.

本文把虚拟仪器与温度二次仪表检定相结合，构建了基于虚拟仪器的温度二次仪表校准系统。

Finally, the FBG sensing properties have been studied by the experiments of displacement stretch and temperature calibration.

通过微位移平台拉伸实验和温度标定实验研究了光纤光栅的应变和温度传感特性。

The development and status about temperature calibration technologies are fist summarized, and the research necessity of temperature calibration system is pointed out.

论文首先概述了温度二次仪表校准技术的发展与现状，指出了温度二次仪表校准系统研究的必要性，介绍了虚拟仪器的发展及其突出特点。

NOTE: The maximum calibration temperature sha not exceed the maximum continuous temperature of the sheath material.

注: 最大标定温度应低于外护套材料的最高温度.

The temperature calibration has an important impact on the temperature accuracy, which is one of the two key performance parameters of distributed fiber optic temperature sensing systems.

分布式光纤拉曼测温系统的重要参量之一是其温度测量精度，系统的温度标定对温度测量精度有着极其重要的影响。

Research on temperature calibration with hot-film anemometer

热膜风速计温度校正研究

Then temperature calibration experiments of the FBG are conducted, followed by the performance tests.

对光纤光栅温度传感器进行了温度标定实验，完成了对传感器的性能测试试验。

When hot-wires have to be used in an temperature or humidity variation environment, its calibration constants often changed consequently.

当热线工作于温湿度变化场合时，其特征参数随之变化。

Temperature Calibration of SF_6 Gas Humidity Standard Using Uniform Relative Humidity

利用等相对湿度对SF6气体湿度标准进行温度校正

The linear calibration method of Pt-resistance that measures temperature is introduced.

介绍了铂电阻测温非线性校正方法.

The method of confined pressure calibration for rock rheometer under high temperature and high pressure.

与高温高压岩石流变仪的围压标定方法>>相似的文献.

The Research of Virtual Temperature Calibration System

虚拟温度校准系统研究

EEPROM was programmed with temperature calibration beforehand.

EEPROM是事先与温度校准.

Establish and Analyze of Automation Temperature Calibration System

温度自动校准系统的建立与分析