thermal X-ray

The effects of different nucleating agents on the crystallization behavior and the properties of Li_2O-ZnO-SiO_2 glasses were investigated by means of differential thermal analysis, X-ray diffractometry, Fourier infrared absorption spectrometry and scanning electron microscopy.

采用差热分析、X射线衍射及傅里叶红外吸收光谱等测试手段，分析不同晶核剂对Li2O-ZnO-SiO2系统玻璃析晶行为和性能的影响。

A super thermal X-ray Fresnel zone plate coded imaging camera is developed and get used in hohlraum physics experiments. Space distribution of super thermal X-ray emit region which related to the action of super hot electron in a hohlraum is obtained at first time.

利用该成像系统在神光Ⅱ装置黑腔物理实验中首次获得了腔内超热X光发光区域空间分布图像，图像反映了腔内超热电子行为区域的空间分布特征。

Changes and their mechanisms are analyzed and discussed combining with the results of thermal analysis and X-Ray diffraction patterns.

结合热分析和X-射线衍射等实验结果，讨论了皮纤维结构变化对其耐热性能的影响。

The influences of heat setting conditions on the structure of PAC fibres investigated from several approaches like thermal swelling retractions, X-ray diffraction and studies of mechanical properties.

本文从热溶胀收缩，X-光衍射和机械性质几个方面，观察热处理条件对丙烯腈三元共聚纤维（PAC纤维）聚集态结构的影响。

Differential Thermal Analysis and X-ray Study of Glassed in Niobium& Silicate System

铌硅酸盐系统玻璃的差热、X-射线研究

Numerical simulation of the conversion of thermal X-ray radiation from laser-induced plasmas and radiation heating

对激光等离子体中X射线的产生与辐射加热研究

Residual stress analysis has been investigated for Ni-base thermal sprayed coatings with laser melting and consolidation ( LMC) processing by means of X-ray diffraction ( XRC) method.

本文用X射线衍射法研究了45号钢基体上镍基热喷涂层经激光熔凝处理后的残余应力。

Different rayon based carbon fiber precursors are studied by means of scanning electron microscope ( SEM), Thermal Mechanical Tester and X-ray diffractometer.

用电镜、纤维热机械仪、X光仪对不同来源的粘胶基碳纤维原丝及其碳丝进行了观察和分析。

The vertical section LaAl_2-LaCu_5 of the ternary system Al-Cu-La was studied by differential thermal analysis and X-ray diffraction method.

用微差热分析和x-射线衍射法研究了Al-Cu-La系的LaAl2-LaCu5垂直截面。

The complex [ Pt ( DEHS) 2Cl4] has been prepared by extraction method and characterized by elemental analysis, molar conductance, differential thermal and thermogravimetric analysis as well as infrared spectra. The molecular structure of the complex has been determined by four-circle X-ray diffractometer.

用萃取法合成了[Pt（DEHS）2Cl4]，对配合物进行了元素分析，摩尔电导，差热一热重和红外光谱等测试并经X射线单晶结构分析确定了配合物的结构。

Tests were carried out by measuring the thermal expansion and the X-ray diffraction intensities of high-tension insulators.

通过测定高强度绝缘子的热膨胀和X射线衍射强度进行试验。

Utilizing heat aging experiments, thermal analysis technique, X-ray diffraction etc, this article investigates stability and crystal properties of polyaniline/ poly ( vinyl alcohol) films.

利用热老化实验、热分析技术、X-射线衍射等考察了聚苯胺/聚乙烯醇复合膜的稳定性能和结晶性能；

The properties of the product were characterized by thermogravimetry-differential thermal analysis, X-ray diffraction and Fourier infrared transmission spectroscopy.

用差热-热重分析、X射线衍射、红外光谱等手段对样品进行表征。

Transient Thermal Analysis of X-ray Lithography Mask during Post-exposure baking

X射线光刻掩模后烘过程的瞬态热分析

The characterizations were performed by differential thermal analysis, X-ray diffraction, Fourier transmission infrared spectroscopy, scanning electron microscopy and UV-Vis-NIR scanning spectrophotometer.

采用差热分析（DTA）、X射线衍射（XRD）、扫描电镜（SEM）、傅里叶红外光谱FT-IR和UV-Vis-NIR分光光度计对材料进行表征。

Appraisal result of the new technique for measuring crystal thermal expansion by using X-ray powder diffraction

用X射线粉末衍射仪测定晶体热膨胀新技术的鉴测结果

The mechanism of electrochemical formation of CdSe layers were studied by means of electrochemical methods, and their composition and morphology were detected by differential thermal analysis, X-ray diffraction, X ray photoelectron spectroscopy and scanning electron microscopy.

本文用电化学方法研究CdSe层的电化学形成机理，并借助差热分析、X射线衍射、X光电子能谱及扫描电镜等技术检测CdSe沉积层的组成与形态。

Firstly, we make a concrete analysis and research on the occurances of iron and titanium in mineral materials by using instrumental analysis methods such as electron paramagnetic resonance spectrometer, differential thermal analysis, X-ray powder diffraction, fourier transform infrared spectrometer, transmission electron microscopy, XRF.

我们首先利用电子顺磁共振波普仪、差热分析、X射线粉晶衍射、傅里叶红外变换光谱仪、透射电镜、XRF等仪器分析手段对矿物原料中铁、钛的赋存状态进行了具体分析与研究。

To enhance the polarization of starch, the oxidized starch-BA-MAA-Gd copolymer was synthesized by radical graft copolymerization. The structure of the graft copolymer was determined by IR, scanning electron microscopy, state thermal analysis and X-ray diffraction.

通过自由基接枝共聚的方法，合成了改性的氧化淀粉-BA-MAA-Gd共聚物，采用红外光谱、扫描电镜、同步热分析、X射线粉末衍射等方法对产物进行了结构表征。

The fourteen new FLPA were characterized by means of CLIN elementary analysis, P W weight analysis, scanning electron microscope and energy-dispersive X-ray analysis, IR, UV, W, XPS, TG and DSC thermal analysis and so on.

通过CHN元素分析、P、W重量分析、电镜扫描能谱分析、IR光谱、UV光谱、XRD光谱、XPS分析、TG和DSC热分析等手段进行结构表征。

Mg-Sn composite oxide precursors were synthesized by the hydrothermal and co-precipitation methods. A series of products could be obtained by the decomposition of precursor at different temperatures for 4h. The samples were investigated by thermo-gravimetric and differential thermal analysis, X-ray diffraction and scanning electron microscopy.

采用水热法和共沉淀法合成Mg-Sn复合氧化物的前驱体，并将其分别在不同温度下煅烧4h，得到一系列Mg-Sn复合氧化物。

Activated carbons are characterized by thermal gravimetric analysis, X-ray diffraction, nitrogen adsorption/ desorption isotherms and transmission electron microscope.

活性炭的结构性质由热重分析，X射线衍射，氮气吸附/脱附等温线和透射电子显微镜等表征。

The product was characterized by means of element analysis, powder X-ray diffraction, Fourier transform infrared spectro-scopy, low-temperature nitrogen adsorption-desorption technique, thermogravimetry-differential thermal analysis method.

采用元素分析、粉末XRD、傅里叶变换红外光谱、低温N2吸附-解吸附技术和差热-热重分析方法对制备产物进行了表征。

The measurement of thermal electrical resistivity and X-ray diffrction method were used to study the process of crystallization. The results show that the alloy maintains a single extracted phase during a wide range of annealing temperature.

我们采用晶化过程中电阻测量及X射线衍射方法研究了该合金的晶化过程，研究表明该合金在很宽的温度范围内进行退火处理都只存在单一的αFe（Si）析出相。

Chapter two concerns three experiment technique, internal friction technique, thermal analysis technique and X-ray diffraction technique.

第二章则介绍了课题工作中所使用的三种实验技术：内耗技术、热分析技术和X射线衍射技术。

The thermal diffuse X-ray scattering and elastic constants of zinc

锌的X射线热漫散衍射及弹性系数

The microstructure and morphology of products were examined by differential thermal analysis, X-ray diffraction, and transmission electron microscopy.

采用差热分析（DTA）、X射线衍射（XRD）和透射电子显微技术（TEM）分析了产物的组织形态。

In this paper, SEM, Laser Size Analyzer, Specific Area Measurement, Micro Thermal Gravimetry and X-ray Diffraction are used to determine the activation mechanisms about pretreated magnetite concentrate by high pressure grinding.

本文通过SEM、激光粒度分析、比表面积测定、润湿热的测定及X衍射分析对高压辊磨预处理铁精矿的活化机理进行了研究。

Two Kinds of bentonitic samples collected from Shenmu coal field in Shaanxi province have been systematically determined with the methods of chemical analysis, differential thermal analysis, x-ray diffraction analysis, transmissive electron microscope and so on.

采自陕西神木煤田的二种膨润土样品，用化学分析、盖热分析、x射线衍射分析、透射电子显微镜等方法，进行了系统的测试。

The influence of chelating agents on the dielectric properties and microstructure of Ba_ ( 0.5) Sr_ ( 0.5) TiO_ ( 3) thin films were studied using an impedance analysis, differential thermal analysis, X-ray diffraction, and transmission electron microscopy.

采用阻抗分析、差热分析、X射线衍射、透射电镜等方法研究了螯合剂对Ba0.5Sr0.5TiO3薄膜结构与性能的影响。