thermal cathode

Lining stress and thermal balance designs, cathode material qualities and preheating methods are described and analysed in the present paper.

本文对铝电解槽内衬应力和热平衡设计、阴极材料质量和焙烧方法等阴极技术问题进行了描述和分析。

The composite cathode material consisting of LVO and certain proportion of iron disulfide has better general properties compared with LVO and iron disulfide, and it exhibits good performance in long life thermal battery.

以锂化的氧化钒材料为主、添加一定比例二硫化铁的复合阴极材料，其综合性能优于锂化的氧化钒和二硫化铁这两种阴极材料，应用于长寿命热电池中，取得了比较好的效果。

The thermal battery was prepared with high temperature-produced NiCl_2 as the cathode.

以高温处理氯化镍作为热电池的正极材料制备热电池；

Olivine structure lithium iron phosphate ( LiFePO_4) has the advantages of low cost, environmental benignity, long cycle life and thermal stability when it was used as cathode materials for lithium-ion batteries.

橄榄石结构的LiFePO4作为锂离子电池正极材料具有价格低廉、对环境友好、循环稳定性和热稳定性好等优点。

Dynamic Thermal Dissipation of Cathode Module in Electron Gun of Traveling Wave Tube

行波管阴极组件动态热耗散分析及优化设计

This CAD method and program can also be used in design of thermal cathode high brightness injector for free electron laser.

这种设计方法和设计程序也可用于自由电子激光用的热阴极高亮度注入器设计中。

Reactivity with anode and cathode active materials with the electrolyte determines the onset of thermal conditions.

当电解液自发地直接和正极、负极的活性物质反应能够吸收电池的热量.

Measurement of the Curvature Radius for the Thermal Cathode Used in Vacuum Microwave Devices

用于真空微波器件的热阴极曲率半径测试研究

Numerical simulation for thermal emission of cathode

阴极区热电子发射的数值模拟

This model can decrease the early damage of aluminum reduction cell and prolong the life of aluminum reduction cell by avoiding thermal gradient in the cathode resulting from the preheating and the start-up of aluminum reduction cell.

此模型从数值上避免了由焙烧启动而带来的阴极内较大温度梯度，能有效地减少铝电解槽早期破损，提高铝电解槽的寿命。

Thermal treatment increases the cathode phase, the anode efficiency decreases with the cathode increasing and dropping.

固溶处理增多了铝合金阳极的阴极相，阴极相的增加及脱落，增大了自腐蚀，使阳极效率降低。

The simulation results have provided useful references for these problems such as thermal cathode primary electron emission, the determination of ion beam derivation area and the effective confinement of discharge plasma in the design of ion source.

计算结果对于离子源设计中的阴极热电子发射、离子束有效引出面积确定及等离子体的有效约束等重要问题有一定参考价值。

Second, modified large-crystal NMC materials are used for the cathode, improving the thermal stability of the cathode powder.

第二，电池正极选用改性的大单晶三元材料，提高材料的热稳定性。

Feasibility of the vanadium oxides composite ( LVO) as the thermal battery's cathode material

钒复合氧化物作热电池正极材料的可行性研究

Effect of gases on emission characteristics of the ta_2n thermal field electron cathode

气体对氮化钽热场阴极发射特性的影响

Cobalt disulfide cathode for high-power thermal battery

二硫化钴作高功率热电池正极材料的研究

Researches on Thermal Emittance of Metal Cathode in Photoinjectors Hottest Word

光阴极电子枪中金属光阴极的热发射度研究

An argon ion source used for sputtering deposition has been successfully developed based on the construction of hollow cathode connecting hollow anode and the technologies of thermal cathode electron emission arc discharge, plasma magnetic confinement and ion extracting on a curving surface.

本文采用空心阴极空心阳极结构，用热阴极电子发射弧放电驱动并用磁场约束产生等离子体，用曲面发射引出离子束，研制成了氩气放电溅射离子源；

Model of free burning arc at thermal emission cathode zone

自由电弧热发射阴极的物理模型