valve assembly

The dual-flow regulating valve assembly is the essential component of the system, which is comprised of intelligent controller, electric executive mechanism, dual-flow regulating valve, main pressure gauge and oil pressure meter.

其中，单井智能双流调节阀装置是整个系统的基础单元，由智能控制器、电动执行机构、双流调节阀及干压表、油压表等组成。

Secure with locknut and gaskets. Install valve assembly.

用放松螺母和垫圈紧固. 安装阀门总成.

To avoid this discharge, install a spring-loaded, rubber seated check valve ahead of the backflow assembly.

为了避免这种排放，要在防回流阀总成前面安装一个弹簧驱动、橡胶阀座的止回阀。

The wear of diesel engine fuel pump plunger and barrel assembly, delivery valve assembly and needle valve assembly has direct effect on the fuel supply rule.

柴油机喷油泵的柱塞、出油阀和针阀这三大精密偶件的磨损程度直接影响到柴油机的供油规律和各种综合性能。

Remove drain plug and install valve assembly.

拆卸排泄塞,并且安装阀门总成.

Finite Element Analysis of Strength of an Oil Tank with the Hanging Valve Assembly

采用吊阀系统的油罐强度有限元分析

The design proposal of a novel needle valve assembly is given.

提出了一种新颖的针阀偶件设计方案。

Study on anodization surface quality of valve assembly parts

阀门装配零件阳极化表面质量问题及解决方法

Use for hydraulic and pneumatic valve assembly in fluid power systems.

用于流体动力系统中的气动和液压阀组件.

The valve assembly herein discussed is mainly composed of valve, valve seat, piston, spring and rod.

防止清蜡热液渗入地层的新型井下阀装置主要由阀门 、 阀座 、 活塞 、 弹簧和连杆等组成.

Study of Break Time and Temperature Control System of Valve Assembly Tester

活门组件试验器关断时间及温控系统研究

Research and application of standing valve assembly on tube pumps for blockage for prevention

普通管式泵防堵塞固定阀的研究与应用

Its design features include a double check valve assembly to assure positive, dependable seating protection.

这种结构特点在于包括一个双止回阀总成,确保积极 、 可靠的密封保护.

Remove the relief valve assembly ( includes cover O-ring, stem and diaphragm assembly ).

拆卸安全阀总成 ( 包括阀盖O形环, 阀杆和隔膜总成 ).

There shall be no brass or bronze parts used within the check valve assembly.

在止回阀总成内部不应该采用黄铜或青铜部件.

Carefully remove handwheel and turn indicator sleeve assembly, leaving the valve at its balance set point.

小心拆卸手轮,并旋转指示器套筒总成, 将阀门保留在它的平衡设置点上.

A double check valve assembly shall be installed at each noted location.

双止回阀总成应该安装在每个指定的位置.

The Testing Bench of Roll-over Valve Assembly

汽车翻转安全保护阀组件测试工作台的研制

Kit consists of: Relief Valve Assembly, RV Spring, and RV Cover O-ring.

组件包括: 安全阀总成, 安全阀弹簧, 和安全阀阀盖O形环.

The arithmetic model and stimulating result compared the experiment result in order to verify the establishment of a Mathematical model and the feasibility of the correct simulation method. ( 4) Research the temperature control system of valve assembly tester in detail.

从而验证了建立数学模型的方法和仿真方法的正确可行性。（4）深入研究了活门组件试验器的温度控制系统。

Series 719 Double Check Valve Assembly shall be installed at each noted location.

系列719双止回阀总成应该安装在每个标注的位置上.

Part mapping and assembly drawings of a safety valve.

测绘安全阀三维装配体.

Remove drain plug from bulkhead fitting and install valve assembly. Hand tighten.

从堵头连接件上拆卸排泄塞,并安装阀门总成. 用手紧固.

To assemble the Relief Valve Assembly have a screwdriver ready.

准备好组装安全阀总成的螺丝刀.

Vacuum gauge and valve assembly can optimize the flow of samples.

使用真空表和排气阀优化样品流速.

Remove the relief valve assembly as outlined on page 5.

按照上一页的相关说明拆卸安全阀总成.

Valve and pump operations are interlocked by a limIt'switch assembly.

通过限制开关总成,阀门和泵的运行是相互作用,相互影响的.