welding procedure

Fatigue failure is the major failure form of welding structure, the fatigue analysis of welding structure is very important to the design of the welding structure and the design of welding procedure.

疲劳破坏是焊接结构主要的破坏形式，焊接结构的疲劳强度分析对于焊接结构的整体设计和焊接工艺设计是至关重要的。

Welding procedure of alloy steel gears of reducers

减速器合金钢大齿轮的焊接工艺

Verification shall be provided using a welding procedure qualification ( general) as well as one production weld test plate from an identical heat for each welding procedure ( specific) utilised.

通过焊接工艺评定（一般）以及对每个焊接程序经受同样受热的一块产品焊接试板（特殊）来进行确认。

Application of argon arc welding procedure for B10 copper-nickel pipe

B10镍铜管氩弧焊焊接工艺的实践应用

Metal Material Tinplate Welding Procedure of Copper-Steel Different Materials

金属材料马口铁铜&钢异种金属材料的焊接工艺

Computer Programming of Welding Procedure List ( WPL) for Boiler Drum

锅筒《焊接生产工艺一览表》的计算机编制

Welding Procedure List ( WPL) is a comprehensive procedure document commonly used in welding directly by bolier manufacturer.

焊接生产工艺一览表（WPL）是锅炉制造厂常用的直接用于焊接生产的综合性工艺文件。

In addition, aiming at technology request of welding procedure of great thickness high strength hull-structure steel plate and research of welding processes, the test methods of weldability of metal which comply with China Classification Society ( CCS) are introduced in the thesis.

同时，针对高强度船体结构钢厚板焊接工艺、焊接方法的研究中所涉及的技术要求，介绍了中国船级社（CCS）规定的金属焊接性评定方法。

The running tests of the alloy coatings on the blade of hydraulic turbine produced using oxy-acetylene spray welding procedure manifested that the average service life of many different hydraulic turbine obtained a lot improvement after spray welding.

应用氧乙炔喷焊工艺在水轮机叶片上制备合金涂层，经过数台机组多年的实际运行，表明该材料抗磨蚀性能优异，喷焊后的水轮机叶片的平均使用寿命得到大幅度提高。

Defining, by means of detailed weld procedure specifications ( WPS), welding activities.

通过具体的焊接程序规范要求（WPS），确定焊接活动。

In the manufacture procedure of the automobile body, the quality of welded joints, not only directly determines manufacturing deviation in the body welding assembly process, but also guarantees the reliability and security of the car.

在汽车车身的制造过程中，焊接的好坏，不仅决定了车身焊接过程中的制造偏差，也决定了车辆的可靠性以及安全性。

A Welding Procedure Qualification Record ( Form No.: FN09/ 02-02) is a record of the welding data used to weld a test coupon.

焊接程序检定记录（表号：FN09/02-02）为焊接数据记录文件，用于附体试片的焊接操作。

Study on Welding Procedure Digital Control of Micro Plasma arc Welding Machine

微束等离子弧焊机焊接程序数字控制研究

Through analysis of weldability of the base metals, a welding procedure is proposed.

通过对储罐材质的焊接性分析，设计的焊接工艺应用于储罐现场的焊接，焊缝质量达到了产品的焊接技术要求。

The Welding Procedure for Large Diameter Flange of Spiral Plate Heat Exchanger

螺旋板式换热器大直径法兰的拼焊工艺

Through welding procedure qualification tests, excellent testing results are obtained;

通过工艺评定试验，获得了优良的焊接试验结果；

Each welding procedure is accomplished by a single chip microcomputer with the purpose of precise welding.

由单片机来控制焊接各个工序及完成用户的设定，达到精确点焊的目的。

According to the standard's requirements, test piece for qualification of welding procedure and for product welding should be carried out various bending test.

焊接工艺评定试板和产品焊接试板，按标准要求都要进行弯曲试验。

The welding procedure is strictly observed during tank welding process, thus the welding quality is guaranteed and the welding efficiency is increased.

施焊过程中通过严格执行工艺规范，既保证了焊接质量又提高了焊接效率。

To adopt welding procedure method commonly used in long distance transmission pipeline, analog field site condition to weld for pipe with SSCC resistance itself and carry out SSCC resistance test to girth weld jointer obtained to provide technical support for oil and gas construction.

采用目前长输管线常用的焊接工艺方法，对本身具有抗SSCC性能的钢管模拟野外现场条件进行焊接，将所得环焊缝接头进行抗SSCC性能试验，为油气管线的施工建设提供技术支持。

Welding procedure of spherical tank without model expansive shaping

无模胀形球形容器的焊接工艺

Meanwhile, owning to many welding lines and complicated welding procedure, the box column is rarely adopted aboard, which has been already replaced by the rectangle-column with only one welding line.

同时，由于箱形柱的焊缝多，焊接工艺复杂，国外已很少采用，取而代之的是由钢板冷轧成形的矩形柱，该柱柱身只有一条焊缝。

It includes the testing method, the process and the result of welding procedure qualification.

其中包括焊接工艺评定的试验方法 、 过程和结果.

Through the exploration and practice of argon-arc welding procedure for rotor end ring and copper bars, we have determined the new procedure for argon-arc welding of rotor and ring and copper bars and applied it in real prodution.

通过转子端环与铜排氩弧焊工艺的探索与实践，我们确定了适合转子端环与铜排氩弧焊的新工艺，并在实际生产中得到了应用。

Research of root welding technology and welding procedure with back-up shoes pipeline girth welding

带衬垫的管道环焊缝根焊技术及焊接工艺

Girth welding procedure of oil pipe line

石油用钢管环缝焊接工艺

This software applies to manage welding procedure qualification for steel pressure vessels.

该软件适用于钢制压力容器焊接工艺评定的各项管理工作.

The Discuss of Argon-arc Welding Procedure for Rotor End Ring and Copper Bars

转子端环与铜排氩弧焊焊接工艺的探讨

The computer management system of welding procedure for pressure vessels in developed with the general date dabs language FOXBASE.

利用通用数据据库语言FOXBASE建立了压力容器焊接工艺卡的计算机管理系统。

Research on Braze Welding Procedure of Automobile Heat Exchanger in Nitrogen Oven

汽车空调热交换器氮气炉钎焊工艺的研究