zinc-coated

The welding experiment proves the possibility of this welding technology and equipment for joining of thin steel sheet or zinc-coated steel sheet.

通过实焊试验证明了该焊接工艺及设备对于薄钢板或镀锌钢板拼接的可行性。

Mechanism of cryogenic treatment improving electrode life for spot welding zinc-coated steel sheet

深冷处理提高镀锌钢板点焊电极寿命的机理

Light emission from the plasma in laser welding of zinc-coated plates when there appeared pinhole in the weld were analysised on magnitude and frequency ranges.

对镀锌板激光拼焊过程中焊缝上出现孔洞时的等离子体光信号进行了幅域和频域分析。

The galvanic corrosion of aluminum alloy coupled with different materials, including Q_235 steel, zinc-coated iron plate, copper plate, was studied by free running test in 3.5% NaCl solution.

采用自由测试法测定了铝合金分别与Q235钢、镀锌铁片和铜片三种不同材料组成的电偶在3.5%NaCl水溶液中的电偶电流、腐蚀电位和腐蚀速度。

Zinc coating in the surface of ordinary sheet called zinc-coated sheet, it has good corrosion resistance and was used in the automotive, construction, household appliances industry.

镀锌板是在普通钢板的表面附着一层锌层，使其具有良好的防腐蚀性能。现在已经越来越多的应用在汽车、建筑、家电等行业。

The Practice of the Treatment and Reuse of Basicity Zincate Zinc-coated Wastewater

碱性锌酸盐镀锌废水处理与回用的实践

A Finite Element Simulation of Spot Welding for Zinc-Coated Steel

镀锌钢板点焊过程的有限元模拟

Preparation method of zinc-coated ( galvanized) steel surface for painting

镀锌钢表面制备方法

The following are the specific of research: ( 1) Analysis the impact of stamping velocity and lubrication conditions on the cupping value of zinc-coated sheet by cupping test.

具体研究工作如下。（1）通过对镀锌板进行杯突试验分析了冲压速度和润滑条件对镀锌板杯突值的影响。

This paper designs a new kind of nozzle used for laser welding of zinc-coated steels with metal powder and studies the better modality of shielding gas and the powder beam with schlieren device.

本文设计了一套应用于镀锌板激光填充粉末焊接的喷嘴，并利用纹影仪等手段研究了该喷嘴的最佳保护气流量和最佳粉末束拘束度参数；

Determination of Pb and Cd in the Coating of the Zinc-Coated Steel Sheets by ICP-AES

ICP-AES法测定镀锌板中镀层的铅和镉

Determination of the Content of Aluminum in Coating on Prepainted Hot-Dip Aluminum-Coated and Zinc-Coated Steel Sheets by ICP-AES

ICP-AES测定彩涂镀铝锌板镀层中铝的含量

The Research on Laser Welding Processes of Zinc-coated Steel of Car Body for Improving the Influence of Zinking Layer

降低镀锌层影响的汽车用镀锌钢板激光焊接工艺研究

The research results indicate that the influence of vapor from zinking layer during laser welding can be decreased effectively with the presetting gap, thereby the high-quality joint of zinc-coated steel sheet can be obtained.

试验结果表明：预留间隙法可以有效地降低镀锌层在加热过程中的汽化影响，从而获得高质量的激光焊接质量。

Compared to low-carbon zinc-coated steel sheet, nugget diameter increases discontinuously with the increase of welding current when welding micro-alloyed high strength steel sheet.

与普通低碳镀锌钢板不同，微合金镀锌钢板的熔核直径随焊接电流的增加存在突变现象。

Recovering Metal Zinc and Preparing the Various Zincic Salts from the Hot Dip Zinc-coated Slag

花筒镀铬设备，镀铬设备由热镀锌渣中回收金属锌和制备各种锌盐

Study on laser tailored welding technology and joint of zinc-coated steel plate

镀锌板的激光剪裁拼焊工艺及接头性能研究

Best charcoal tin plate Continuously electrolytic zinc-coated cold-rolled steel sheets and strips

最优厚锡层镀锡薄钢板GB/T15675-1995连续电镀锌冷轧钢板及钢带

Zinc-coated steel wire-Test method for uniformity of zinc coating on wire by the copper sulphate dip

GB/T2972-1991镀锌钢丝锌层硫酸铜试验方法

This paper studies the effect of zinc and shielding gas type on Laser weldability of zinc-coated steels.

本文研究了锌对镀锌板激光焊接性影响，以及不同保护气体对镀锌板焊接性的影响。

Effect of Zinc Coating on the Mechanical Properties of Zinc-coated Sheet

锌层对镀锌钢板力学性能指标的影响

Lasers are being used to weld zinc-coated steels due to high welding speed, small welding seam and narrow heat affected zone.

而激光焊接具有焊接速度高，焊缝窄，焊接热影响区小等一系列优点，因此采用激光焊接技术加工镀锌板成为汽车等制造业的发展趋势。

Research on Breaking of Zinc-coated Low-carbon Steel Wire for Xinjiang Cotton Baling

新疆地区棉包断丝问题研究

Continuously electrolytic zinc-coated cold-rolled steel sheets and strips Application of PFC Technology in Chenggang 1780 HSM

GB/T15675-1995连续电镀锌冷轧钢板及钢带承钢1780热连轧机板型控制技术的应用

Continual hot-dip zinc-coated steel sheets and strips

GB/T2518-1988连续热镀锌薄钢板和钢带

The effect of zinc coating thickness to the quality of spot welding of zinc-coated steel

镀层厚度对镀锌钢板点焊质量的影响

Study on the frictional behavior of zinc-coated sheet in warm die

温模条件下镀锌钢板摩擦行为研究

To introduce the effect of the component of low-carbon wire rods on drawing effect, property of heat-treated end product and application conditions of zinc-coated low-carbon steel wire for cotton baling, put forward the best component.

介绍低碳盘条的成分对棉花打包用低碳镀锌钢丝的拉拔效果、热处理后成品性能及产品使用情况的影响，提出最佳成分。

This paper illuminates the advantages and methanism of Nd: YAG laser on zinc-coated steel welding with wire feed.

介绍了采用Nd：YAG激光器在镀锌板填丝焊接中的应用优势和加工机理，分析了实验结果。

Effect of Spot Welding Parameters on Nugget Formation of Zinc-coated Steel Plate

镀锌钢板点焊参数对熔核结晶形态的影响