刮削

Similarly, Sandy Bay sealed the surface of the solid particles will be squeezed, scrape out the groove.

同样，口环的密封表面也会被固体颗粒挤压、刮削出沟槽。

Finite element analysis of hard skiving cutter for stress and strain

硬齿面刮削铣刀盘切削应力应变有限元分析

Research On surface Roughness of Skived Gear Quenched

刮削硬齿面齿轮表面粗糙度的研究

The study on vibration and noise characteristics of scraped double-circular arc gear with carburized rigidification tooth surface

刮削加工渗碳硬齿面双圆弧齿轮噪声振动特性研究

Because the profile of skiving cutter with plane flank for Gleason gear is a straight line with an angle λ, the tolerance of the designed profile and the tolerance of the reshaped profile are great.

采用尖齿刮削刀盘对弧齿锥齿轮硬齿面进行刮削加工时，刀盘切削刃采用斜角直线造形法，切削刃较大刀具造形误差和重磨误差较大。

In this paper, residual stresses and their variation law of skived automotive gears are studied by X-ray diffraction method.

本文通过对刮削后汽车齿轮齿面残余应力的测定，探讨了刮齿表面残余应力的变化规律。

Through alter the method on scraping contact surface between main spindle head and lathe frame, we may increase contact point and improve the contact rigidity.

通过改进普通车床主轴箱与床身接触面的刮削方法增加接触点，从而提高接触刚度。

Based on skiving feature of hard-surface gear, introduces skiving machine and tools, sums up reasonable cutting standard combined with production practice.

根据硬齿面齿轮刮削的特点，介绍了刮削用的机床和刀具，结合生产实际总结出比较合理的切削规范。

Analysis of the reground profile accuracy of the hard surface skiving hob

硬齿面刮削滚刀重磨齿形精度分析

Spiral bevel gears carbide skiving cutter has designed by method of inclination cut and straight line profile, and the generating surface of cutter is hyperbolic but conic.

根据斜角直线齿形造形方法设计出的弧齿锥齿轮刮削刀盘产形面已不再是一个圆锥面，而是一个双曲面。

Work in long course has three main categories: A. the scraping process.

在工作中耗时较长的过程主要有以下三种情况: A. 刮削过程.

The Analysis for the Scraping Principle and Mechanics of the Floating Scraper of An Ice Cream Freezer

冰淇淋机浮动刮刀的刮削机理及力学分析

Geometry simulation of hard skiving process of spiral bevel gears

弧齿锥齿轮硬齿面刮削过程的几何仿真

It is shown that in comparison with grinding, skiving will make gears have a more satisfactory status of residual stress.

研究表明：与磨削相比，刮削可使齿轮呈现满意的残余应力状态；

Skiving Force of Hardened Gear Face

硬齿面刮削力的研究

The measurement of impact-scraping load displacement curve of sealing coating used in aircraft engine can be done with the electronic impact-scraping tester developed by ourselves.

利用自制的电子冲击刮削试验机，测试封严涂层的冲击刮削载荷-位移曲线。

A Design for the Harden Gear Skiving Hob Whose of Mechanical Clamp and Non-re grinding

机夹不重磨硬齿面刮削滚刀设计

Study on Contour Skim of Hardened Large Module Straight Bevel Gears

大模数硬齿面圆锥直齿轮仿形刮削的研究

Shearer and Cutter for Velvet Skiving Machining of Hard Surface Gear

丝绒剪毛机及剪毛刀硬齿面齿轮的刮削加工

The functional relation of the residual stresses and the skiving power and force can be applied to monitor the residual stresses pattern of automotive gears during the skiving process.

刮削残余应力与刮削功率及切削力之间的函数关系，可用作汽车齿轮制造中监测刮削残余应力状态的参考依据。

The particles of sand rub, scratch and cut the rocks against which they are blown.

沙粒磨擦 、 刮削、割切着吹过的岩石.

Residual Stresses of Skived Automotive Gears

汽车齿轮刮削残余应力的研究

Skiving quenched gear teeth surface with hard alloyed hobbing cutter

用硬质合金滚刀刮削硬齿面

Optimized design and reshaping of skiving cutter with plane flank for gleason gear

弧齿锥齿轮尖齿刮削刀盘的齿形优化设计

This paper analyzes the requirement of equpment, tool and workpieces for hard surface gear skiving machining and cutting amount selection and introduces its economic benefits and application range.

分析了硬齿面刮削加工对设备、刀具和工件的要求，切削用量的选择，并介绍了它的经济效益及适用范围。

The profiling error of a new type skiving hob with convex curved rake face is analyzed and the change law of profiling error affected by parameters is expounded.

对新型凸曲前刀面刮削滚刀的理论构形误差进行了全面分析，探讨了各特征参数对构形误差的影响规律。