PTFE

Preparation and pore performance of biaxial stretching PTFE microporous membranes

双向拉伸PTFE微孔膜的制备及其孔性能

PTFE-bronze powder-steel is a widely used three layer self-lubricating bearing material with good anti-friction and anti-wear.

聚四氟乙烯(PTFE) - 铜粉 - 钢背复合材料是一种广泛应用的三层结构自润滑轴承材料,具有良好的减摩耐磨性能.

Application of PTFE Stuffing to Petroleum Gas Booster

填充PTFE填料在石油气压缩机上的应用

It is installed as one solid piece of PTFE and the internal geometrical shape is machined.

阀门内部安装了一体化紧密的PTFE,而且它内部的几何形状是经过加工过的.

Third, the PTFE ( F 4 ) of the corrosion seal ring.

第三, 聚四氟乙烯 ( F4 ) 密封环的腐蚀.

Removal of trivalent chromium from its dilute solution with hydrophobic microporous PTFE membrane

疏水性PTFE微孔膜处理含Cr（III）稀溶液的实验研究

Influence of Morphology of Fluorocarbon Coatings with PTFE on the Settlement of Benthic Diatom

含PTFE氟碳涂层表面形貌对底栖硅藻附着的影响

The most common CGA washers are made from fiber, nylon, PTFE ( Teflon ? ) or CTFE.

最普通的CGA垫圈用纤维 、 尼龙 、 PTFE ( 特氟纶 ) 或CTFE制造.

ObjectiveTo evaluate PTFE AV graft as a vascular access for hemodialysis.

目的　评估运用PTFE人工血管建立血液透析通路的价值.

However, PTFE has some properties that can make it a poor choice for a washer material.

但是, PTFE有一些使它成为垫圈材料的较差选择的性质.

The principle and main structure were introduced for a PTFE moulding equipment based on technics innovation.

介绍了一种在成型工艺上具有创新的聚四氟乙烯模压成型设备的基本原理和结构.

All gate valves are available with optional PTFE seat rings.

所有闸阀都可以配置备选的聚四氟乙烯(tfe)座环.

Copper clad laminates ( CCLs) with high performance based on modified polytetrafluoroethylene ( PTFE) were prepared by using blended tetrafluoroethylene and hexafluoropopylene ( FEP) as the modification resin.

利用聚全氟乙丙烯（FEP）共混改性聚四氟乙烯（PTFE），制备了高性能聚四氟乙烯覆铜板。

To improve Technical Process of PTFE Resin Fined Powder

聚四氟乙烯树脂细粒模压粉生产工艺改进

The adhesive used in study was a mixture of 0.4 % CMC and 10 % PTFE.

采用混合粘结剂CMC和PTFE,CMC用量为0.4%,PTFE用量为10%.

Experimental results show that POB reduces the friction coefficient and increases the wear resistance of PTFE.

结果表明,添加POB降低 了PTFE的摩擦系数,提高了PTFE的耐磨性.

PTFE gasket tape can be used in virtuallg all types of sealing applications throughout industry.

适用于反应釜、汽轮发电机及各种异型口罐、桶的密封.

Teflon PTFE electret with 300V to 1500V surfact voltage, disinfected by ultraviolet rays, acted on the ACTT 25923 staphylococci aureus with the concentration of 10 4 for 1 to 24 hours, respectively, then we began to observe the bacteriostasis of the electret.

表面电位为－300V～－1500V的Teflon PTFE驻极体，经紫外线消毒后，对浓度为10－4的ACTT25923金黄色葡萄球菌分别作用1～24小时，观察驻极体对该细菌的抑菌作用。

Polyphenylene sulfide ( PPS ) composites filled with Polytetrafluoroethylene ( PTFE ) and kaolin nanoparticles were prepared by compression molding.

通过模压的方法制备了聚四氟乙烯 ( PTFE ) 和纳米高岭土填充的聚苯硫醚 ( PPS ) 复合材料.

All gate valves are available with optional PTFE seat rings.

所有闸阀都可以配置备选的聚四氟乙烯(tfe)座环.

Teflon: Trademark for a polymer of tetrafluoroethylene fluorocarbon ( polytetrafluoroethylene [ PTFE ] ) .

铁氟龙: 四氟乙烯( ptfe ) 或氟化的乙烯-丙烯 ( FEP)的聚合物的商标名.

Properties of FKM/ PTFE/ carbon black composites

FKM/PTFE/炭黑复合材料的性能研究

The technology of preparing cohesive poly ( tetrafluoroethylene ) ( PTFE ) board and regarding adhesion property were discussed.

研究了可粘性聚四氟乙烯(PTFE ) 板材的制备工艺及其粘合性能.

All valves are available with optional PTFE seat rings.

所有闸阀都可以配置备选的聚四氟乙烯(PTFE)阀座环.

Tribological and corrosive behavior of PTFE composites filled with PTW in sulfuric acid solution

酸性溶液中PTW增强PTFE复合材料的耐蚀性和摩擦磨损性能

The performance of Polytetrafluoroethylene ( PTFE ) is good and is applied intensively on sealing material at present.

聚四氟乙烯 ( PTFE ) 性能优良,是目前广泛应用的密封材料.

The ability of arc ablation resistance of PTFE composites significantly improved with the addition of fillers.

添加填料大幅度的改善了复合PTFE的耐电弧烧蚀能力.

It is an important developing direction for us to diversify PTFE sorts and seriate the existing products in the future.

同时指出，增加聚四氟乙烯的品种以及对现有的品种进行系列化将是今后我国科研工作者的一个重要研究方向。

The chemical and physical characteristics and applications of polytetrafluoroethylene ( PTFE ) fiber are introduced.

介绍了聚四氟乙烯 ( PTFE ) 的化学、物理等特性及其应用.

The inherence vices of PTFE limit it's application as anti-corrosion coating in the engineering field.

聚四氟乙烯(PTFE)的一些固有缺陷,限制了其作为 防腐蚀 涂层在化工领域中的应用.