carbide

Silicon carbide based Schottky diode gas sensors are widely used for applications such as emission measurements and leak detections.

SiC肖特基二极管气体传感器可以广泛应用于检测气体排放物和气体泄露。

Orientation control of primary carbide in Fe-Cr-C hardfacing alloys.

Fe -Cr-C 耐磨堆焊合金中初生碳化物生长方向的控制.

CarbonControl in MIM Process of Nonmagnetic Fine cemented Carbide was studied.

研究了细晶无磁硬质合金金属注射成形工艺中碳含量的控制.

Cement concrete pavement diamond saw blade, carbide saw blades.

水泥混凝土路面的金刚石锯片, 硬质合金锯片.

Analysis on the future of domestic PVC production enterprises adopting calcium carbide process and countermeasures

我国电石法PVC的未来环境和对策分析

Carbide balls are usually recommended for Brinell hardness numbers greater than 500.

在布氏试验中碳化物质地的球通常在加载500千克以上时使用.

To overcome these problems the originally fitted, oil fed, bearings, including the thrust bearings, were replaced with Silicon Carbide bearings operating in the pumped fluid.

为了克服这些缺点，原装的油润滑轴承，包括推力轴承均更换为碳化硅轴承，并在泵送流体中工作。

At the same time sales agent with tungsten carbide alloy PCB-drilling.

同时代理销售PCB用 碳化钨合金微钻.

This important carbide precipitates both inter and intragranularly.

这种重要的碳化物向晶体内和晶体间沉淀.

Mirror Micro Relief Grinding Mechanism of TiC Series Steel Matrix Carbide Alloys Float · Swim

TiC系钢结硬质合金镜面微浮凸磨削机理的研究

This paper develops that porous silicon carbide ceramics have function of heating element by semi-conductor characteristic of silicon.

本文利用碳化硅的半导电特性，开发通电发热功能的多孔碳化硅陶瓷，即利用通电发热将陶瓷体加热到一定温度来分解孔道内的堵塞物，以此来解决上述问题。

Silicon carbide is an important wide band gap semiconductor for high temperature, high voltage, high power and high frequency devices.

SiC是一种重要的宽禁带半导体材料，在高温、高压、高功率及高频器件方面有重要的应用前景。SiC中的离子注入无论在基础研究还是在器件工艺中都具有重要的意义。

Applications : used in carbide alloy, diamond tools, biding admixture , high-temperature alloy , rechargeable cell.

用作硬质合金,磁性材料, 金刚石工具, 高温合金, 可充电池等.

A study of fracture process and fracture mechanism of WC base steel-bonded carbide

WC系钢结硬质合金断裂过程与断裂机制的研究

A carbide former if there is sufficient Carbon in the steel also.

如果钢中有足够的碳则碳化物就形成了.

Tests on individual boron-carbide nanowires were carried out in Zurich, Switzerland, and ultraviolet irradiation tests were performed in Zhejiang University of Technology in China.

个别硼碳化物纳米线在苏黎世和瑞士进行了测试，紫外线照射测试是在中国的浙江工业大学进行的。

The orifices of this nozzle are almost chocked up with carbide.

这个油嘴的喷孔几乎被碳化物堵死.

The effective measuresare presented bo avoid zonal segregation of carbide.

提出了避免碳化物带状偏析的有效措施.

The unidirectional short silicon carbide fibers reinforced-glass-ceramic matrix composite specimens were fabricated.

制备了单向短碳化硅纤维增强玻璃陶瓷的复合材料.

Suitable for processing chilled steel, steel, stainless steel, cast steel, carbide and dressing super hard materials.

适于加工淬火钢 、 工具钢 、 不锈钢 、 铸铁 、 硬质合金及超硬材料磨具的修整.

For the materials with high hardness, such as cemented carbide, glass , jadeware, etc.

适用于各种高硬材料的磨削及研磨加工, 如硬质合金 、 玻璃、玛瑙 、 珩磨汽缸套等.

A trademark used for an abrasive of silicon carbide crystals.

(商标)由金刚砂晶体构成的研磨剂.

The carbon potential which is higher than the balance carbon principle is not easy to come into being network carbide.

渗碳后的表层随碳势的不同而有不同的含碳量，高于定比碳一定浓度的碳势不会在表面形成网状碳化物。

Formation mechanism of sintering cemented carbide pockmarks is studied.

研究了硬质合金烧结麻面的形成机理.

The bullet is made of Wolfram Carbide , strong and durable.

扩管头为碳化钨材质, 永不磨损.

Use of mechanical seal, seal wearing auxiliary made of graphite and tungsten carbide to achieve no leakage and long service life.

采用机械密封，密封磨擦副采用石墨对碳化钨，不泄露，使用寿命长。

Developing "carbide free bainite/ martensite microstructure with retained austenite film" technique is introduced.

发展无碳化物贝/马组织和富碳残奥薄膜以做到中低温回火合结钢的强韧化优良配合。

Precision grinding of bearing outer jacket made of boron carbide with diamond wheel

金刚石砂轮加工碳化硼轴承外套的研究

These grinding machines for a variety of carbide circular saw the film production and re-grinding.

这些研磨机用于各种硬质合金圆锯片的生产和再研磨.

Processing Influence on Mechanical Properties of Silicon Carbide Matrix Composites

影响碳化硅基复合材料机械性能的工艺因素