carbide的例句大全

Milling Force of Ball Nose End Mill ( BNEM) with Indexable Carbide Rounding Insert& Testing Study of Milling Medium Carbor Steel

硬质合金可转位圆刀片球面模具铣刀的铣削力&铣削中碳钢试验研究

During the deposition of nanocrystalline silicon carbide films, with the increase of tetramethylsilane concentration in the reactive gas source, the crystal structure of silicon carbide whose grain size decreases changes from hexagonal to cubic and the particle shape changes from spherical to cauliflower-like.

在制备纳米碳化硅薄膜的沉积过程中，随着四甲基硅烷浓度的增大，纳米碳化硅晶体结构由六方转变为立方结构，颗粒形状由球状变为菜花状。

The processing influence on the mechanical properties of silicon carbide matrix composites is reviewed, which includes fibers and preform formation, high temperature treatment, interface technology, matrix densification and post treatment.

介绍了纤维及预制体成型、高温处理、界面技术、基体致密化及后处理等工艺因素对碳化硅基复合材料机械性能的影响。

The results show that, the microstructure of the alloy is of lath martensite, with granular carbide dispersed in matrix, the alloy has high strength, toughness and temper resistance.

结果表明：该钢的显微组织为板条马氏体，且基体上弥散分布着粒状碳化物，具有高强韧性、抗回火稳定性；

Standard silicon carbide seals provide high resistance to abrasion and corrosion over a wide range of temperature extremes.

标准金刚砂密封，在高温或低温状态下，仍然具有强大的耐磨损和耐腐蚀能力。

With the rise of temperature, the sequence of the morphology of carbide was: faceted → Chinese script → blocky, the carbide became smaller and distributed more uniformly.

随熔体处理温度的升高，碳化物形态的变化顺序为：块状→汉字形→颗粒状，碳化物的尺寸变小，分布更加均匀。

It was found that the HAZ has a medium temperature transformation characteristics in a wide range of cooling rates, with the bainite sheaves consisting of bainite ferrite plates without carbide precipitation and M-A in the fast cooling regime.

在较宽的冷却速度范围内，焊接热影响区发生的组织转变呈现中温转变特征。在较快的冷却速度条件下，得到的贝氏体板条间无碳化物析出物和M-A岛。

Fine Dispersive Carbide and Tempered Martensite Embrittlement

细小弥散碳化物与回火马氏体脆性

The Microstructure is tempered martensite+ bainite+ retained austenite+ carbide dispersion. The microstructure is the main reason of the good comprehensive mechanical properties.

显微组织为回火板条马氏体+下贝氏体+残余奥氏体+弥散碳化物，该组织是耐磨钢与破碎机原衬板相比较，机械性能提高的主要原因。

The temperature region in which tempered martensite embrittlement appears is up to 370 ℃ in the novel carbide free bainite/ martensite ( CFB/ M) duplex phase steel.

所研制的无碳化物贝氏体/马氏体复相钢出现第一类回火脆性的温度范围在370℃以上。

The effect of following factors on thermal fatigue resistance of GJW50 steel-bonded tungsten carbide, such as, austenitizing temperature, tempering temperature and hardness, has been studied.

研究了奥氏体化温度，回火温度及硬度对GJW50碳化钨钢结硬质合金热疲劳抗力的影响。

Include PVC market weekly report, Caustic soda weekly report, Carbide calcium weekly report, Soda ash weekly report, Industry salt weekly report, and monthly report related with chlor alkali products.

内容以PVC市场周刊、烧碱市场周刊、电石市场周刊、纯碱市场周刊、原盐市场周刊以及各主要氯碱产品月刊的形式体现。

We analyse a mass of data of experiments and conclude that calcium carbide dust can be used in place of lime completely.

经过室内的大量试验和试验路的试验数据分析，电石灰完全可以替代石灰。

A study on the relationship between wear and thermoelectric potential of YT 15 carbide inserts

YT15硬质合金刀片热电特性与磨损关系的研究

Development of Large-size Thin-walled Holey Carbide Cylinder

大尺寸薄壁多孔硬质合金套的研制

Part of the Sandvik Group, Dormer's expertise lies in the manufacture of superior round tools-drills, taps, cutters, reamers and thread milling cutters-in Solid Carbide and HSS.

多马刀具公司隶属于山特维克集团，擅长制造高质量的圆柄类整体硬质合金和高速钢刀具，例如钻头、丝锥、铣刀、铰刀和螺纹铣刀等。

Study on interfacial cobalt phase between diamond film and cemented carbide insert

金刚石膜与硬质合金刀片间界面Co相的研究

Therefore, the purpose of this dissertation was explored the preparation of superfine grain or nano-grained cemented carbide, which used nano-grained W 、 Co 、 C transitional phase powders as raw materials through high energy ball milling W-Co-C mixed powders.

为此，本研究探索了以高能球磨法制备的纳米晶W、Co、C过渡相粉末为原料来制备超细晶/纳米晶硬质合金的新工艺。

Through rapid heating and quenching the grain size of LM_2 steel may be fined down to 4.2 μ m, and its mean intercept length of carbide particles is < 0.32 μ m.

LM2钢经1050℃快速加热淬火后，基体晶粒尺寸可细化至4.2μm以下，碳化物平均截线长小于0.32μm。

Separately adopted carbide and TiN coated carbide to machine aluminum alloy and stainless steel, a series of turn-milling tool wear experiments had been done on a turn-milling machining center to analyze the tool wear and fracture.

在车铣加工中心上，分别采用硬质合金和TiN涂层硬质合金刀片，对铝合金和不锈钢工件进行了车铣加工的刀具磨损试验，研究分析了车铣刀具的磨损和破损特征。