interference fit的例句大全

the mating surface of the rod and bearing cap form a rough surface (interference fit) that eliminates the need for centering sleeves.

该杆和轴承盖形成粗糙的表面（盈），减少了对中心袖子需要交配的表面。

It was found by calculation that thrust load has an evident effect on contact angle while radial load influence feebly, clearance has a great impact on load distribution and appropriate interference fit increases carrying capacity, but the maximum needle burthen also increases.

计算结果表明，角接触球轴承的轴向载荷对工作接触角影响明显，而径向载荷影响很小；游隙对滚针轴承载荷分布的影响很大，适当过盈可提高承载力，但滚针最大负荷增大。

The washer shall be clinched to the stud end with a tight slip fit to an interference fit.

由滑动配合的相互作用力使垫片咬紧于螺栓。

calculation of the interference fit for the electro-spindle of high speed machine tool

高速机床电主轴过盈配合量的计算

Interference fit is an economical and effective method for prolonging fatigue life of jointing structures.

干涉配合是提高连接结构抗疲劳破坏能力的经济而有效的措施.

Radial interference fit ( 0.1 mm)-336 MPa axile tensile load.

径向过盈配合0.1mm，轴向拉伸载荷336MPa。

Clutch engagement speed test Calculation of the Interference Fit Joints at High Rotary Speed

离合器接合转速试验高速旋转状态下压配合联接的设计计算

The study showed that the structural dimensions played an important role the crankshaft gear stress. Based on these, on analyze the impact law of the structural dimensions affect to the interference fit was mainly focused.

研究表明结构尺寸对曲轴齿轮应力影响较大，在此基础上着重分析了结构尺寸对过盈量的影响规律。

The relation between the related structural dimensions of interference fit, the contact state, the running state and the crankshaft gear stress was mainly investigated.

重点探讨了过盈联接相关结构尺寸、接触状态以及运转状态等因素与曲轴齿轮应力的关系。

Contraction of the outer ring due to interference fit in the housing.

收缩,外环由于干扰适合的住房.

Such optimization results can provide a theoretical basis for selecting the rational interference fit precision.

分析结果可为选择链节合理的过盈配合精度提供理论依据.

But the interference fit by hydro form result in the damage occurring on the contact surface.

然而,由于锥套与辊颈利用液压胀形实现过盈装配,使得接触面间在装配过程中发生表面损伤.

For a high speed motorized spindle, the interference fit between the shaft and bearing has a great influence on the stiffness, rotary accuracy and life of the spindle.

高速电主轴轴承与转轴配合的过盈量大小对主轴的刚度、旋转精度和使用寿命具有十分重要的影响。

Three quenched bushes are pressed on the hollow spindle ( sleeve) with a big interference fit, thus the spindle can move forward and backward precisely within the bush.

三个大干涉配合的淬火衬套压装在空心轴（镗套）上，因此，主轴能在衬套内前后精确移动；

The study of the assembly stresses over and above field of the lame problem for interference fit construction

非拉梅问题的过盈配合结构装配应力的研究

Reliability design of interference fit Plastic Filter Plate for Press Filter

压配合联接的可靠性设计压滤机塑料滤板

Reliability Design of the Interference Fit System of Roller Shaft

磨辊轴过盈联接系统可靠性设计

Study on the Relation Between Gear's Hole diameter and Prestressing Force in Interference Fit

过盈压入强化预应力及其变化规律的研究过盈配合时齿轮内径与预应力关系研究

Study on the Performance of Interference Fit for the High Speed Spindle

高速主轴过盈联结特性研究

Stresses analysis on the interface of interference fit with boundary element method

用边界元法分析干涉配合结合面的应力分布