measuring position的例句大全

The optimum measuring position of virtual source in Fresnel double prism experiment is found by derivation.

通过推导,找到双棱镜干涉实验中虚光源间距的最佳测量位置,从而减小间接测量引入的误差,提高测量精度.

Measuring Position Error of Irregular Molding Box Cover with Tri-coordinate Measuring Machine

不规则型面箱盖位置度误差的三坐标机测量

Thus, 30% from the tip of leaf blade was the best measuring position.

因此，距叶尖30%处是最合适的测定位置。

For an A mode biometric probe, ultrasonic beam orientation, measuring position and speed setting ensured the precision of the measurement.

对于A型生物测量探头，通过在声束定向、测量位置和声速设置等方面的设计思想，有效提高测量精度。

Application of Nomograph Theory in Measuring Position of Holed on Watch Plates

诺莫图理论在手表主夹板孔系位置度评定中的应用

N this paper, a method for measuring the parameters of the absorbing thin film waveguide by prism coupling is introduced, which can determine the refractive index and thickness of waveguide by measuring the position of absorbing line of reflected light spot from prism.

介绍了一种用棱镜耦合法测量吸收性薄膜波导参数的一种方法，它是由测得棱镜底部反射光斑中模的吸收线位置来确定薄膜的折射率和厚度。

Methods Parking Ir 192 in centrum for irradiating while measuring irradiation dose by thermoluminescent dosimeter, which laid in the position equivalent to spinal cord.

方法将铱192放射源置于椎体中照射，在椎体后椎管前缘相当于脊髓部位放置热释光计量计测量照射量。

Use the classical bridge method to test the position of the insulated fault point, adopt high voltage and high performance electronic amplifier to substitute galvanometer extend the measuring range of the insulation resistance to 10M Ω.

利用经典电桥法对电缆绝缘故障点位置进行测定，采用高电压、高性能电子放大器代替检流计使测量范围延伸到高达10MΩ的绝缘故障测量。

The results show that the feedback resolution was improved over a wide range of velocities and dynamic position measurements by utilizing the successive dynamic measuring capability of an incremental encoder and the interpolative effect of a high frequency clock.

结果表明：该算法可以充分发挥增量式光栅编码器的动态连续测量能力和高频时标信号的内插作用，在整个测速范围内获得很高的测速精度和精度一致性，提高位置反馈的动态测量分辨率。

Through the introduction of operation principle of the low position fluviograph, the paper shows the feasibility of low position fluviograph in measuring water level of pots tube in large-scale boiler use, and introduces the instructions for use of the fluviograph of low position the relevant technological questions.

通过介绍低地位水位计的工作原理，说明低地位水位计在大型锅炉使用中准确显示锅筒水位的可行性，并介绍了低地位水位计的使用要求及相关技术问题。

On Measuring Technique and Mathematical Model of Position Errors of Internal-Combustion Engine Cylinders

内燃机气缸孔位置度误差测量方法和模型研究

Design of form and position error measuring center with high precision

高精度形状位置误差检测中心的设计

Error separation technique of in-situ measuring the form and position error

形位误差在位测量的误差分离技术

It is one of the effective methods for detecting position of slip plane, measuring thickness of slidebody, finding slip direction, calculating slipspeed and judging deep deformation case of slidebody.

是测定滑坡体滑动面（带）位置、滑体厚度、滑动方向、滑速及判断滑体深部变形状态行之有效的方法之一。

Aiming at main influencing throttle position sensor measuring precision of temperature environment factors in batch experiments.

并针对主要影响节气门位置传感器测量精度的环境温度因素做了批量对比试验。

The method for measuring the position with zero light path difference of two beams of wide band light is given.

提出了一种可以快速实现采用宽带光源的双光束干涉中零光程差位置测量的方法。

A hardware circuit developed is used to get the center position of light sectioning, and the measuring speed is improved.

研制的光刀中心位置获取电路，提高了测量速度；

An optical scaning large-scale coordinate measuring system composed of two stations was used for measuring spatial position of aviatic jig platform.

使用两台发射站组成光电扫描大尺寸坐标测量系统，对航空夹具顶端平台的空间位移进行测量，以校准夹具定位系统。

At the same time, the Reference light way is also fixed to the same horizontal position with the Measuring light way, it can be used to eliminate the impact of the environment to the Measuring light way.

同时，将参考光路也固定在和测量光路同一水平位置，用来消除环境对测量光路的影响。

the unit uses matrix ccd to characterize the position of the end of the optical fiber of the fiber unit by measuring the position of light spot from the end of the optical fiber.

单元采用面阵CCD传感器检测单元定位精度，通过检测光纤端部出射光斑的特征点以表征定位单元上光纤端部位置。