polymerization process的例句大全

This paper mainly discusses the factors influencing fiber color in polymerization process of dry spining acrylon production, such as exit temperature of polymer drier, oxygen content in air blowing system and high oxygen content in mass flowmeter, finds out relative measures, achieving satisfactory results.

着重讨论干纺腈纶聚合工艺中，影响纤维颜色的因素&聚合物烘干机出口温度、风送系统氧含量、质量流量计内氧含量高，找出相应措施，取得满意的效果。

In the polymerization process to produce PVC-S, usually polyvinyl alcohol ( PVA) and hydroxypropyl methylcellulose ( HPMC) are used as compound dispersant. In order to satisfy the requirement of resin quality, a third dispersant ( FSJ3) is also added frequently.

悬浮法聚氯乙烯（PVC）聚合工艺中常用聚乙烯醇（PVA）和羟丙基甲基纤维素（HPMC）作为复合分散剂，为了满足树脂质量要求，也常加入第三组分分散剂（FSJ3）。

And that of Invent-Fischer is in the capability of producing both high quality PA-6 civil chip, and high viscosity of PA-6 chip through the solid condensation polymerization process in se-ries.

Invent-Fischer公司技术优势在于既可生产高质量的民用丝级PA-6切片，又可通过串联固相后缩聚工序生产高黏度PA-6切片。

The title acrylate-polyurethane ( PUA) hybrid emulsion has been prepared by in-situ polymerization process.

采用原位乳液聚合法，合成聚氨酯-丙烯酸酯（PUA）复合乳液。

METHODS Under specified temperature and press, adopt coordination-insertion mechanisms by a ring-opening polymerization process.

方法：在一定的温度和压力下，采用配位-插入聚合法通过交酯开环合成聚乳酸-乙醇酸共聚物缓释材料。

Tch polymerization process for CDP was put forward in China. It was suggested that moderate-temperature process should be chosen to synthesize SIPE and be optimized to improve the CDP quality.

分析我国PTA间歇聚合工艺合成CDP存在的问题，建议用中温法合成SIPE，优化合成工艺，提高CDP产品质量。

Study on the oxidation thermal polymerization process of coal-tar pitches

煤沥青氧化热聚合工艺的研究

This paper deals with the polymerization process of high softening point terpene resin.

本文探讨了制造高软化点萜烯树脂的聚合工艺。

Tetrafunctional peroxide is a new type of initiator for free radical polymerization. The polymerization process initiated by tetrafunctional initiator is more complex since there are more than one active group in it.

四官能度过氧化物引发剂是一种新型的自由基聚合引发剂，其分子中含有四个过氧键，使聚合过程变得复杂。

By means of the evaluation on the pitch production process with binder such as vacuum flashing process and thermal polymerization process, the property of coal pitch used as binder and its influence on carbon products quality are discussed, the conception of this pitch production process are given.

通过对真空闪蒸法和常压热聚合法等粘结剂沥青生产工艺的评价，讨论了作粘结剂用的煤沥青性能及其对碳素制品质量的影响，提出了生产优质粘结剂沥青工艺的设想。

Back-tracking simulation of constant temperature operation switch and dynamic problem of products design in free radical polymerization process is completed and validated in this simultaneous approach.

应用该求解方法进行了自由基聚合反应恒温操作切换的回溯模拟及产品设计动态优化，验证了方法的可行性。

The 4-aminopyridine ( 4-AP) molecularly imprinted polymer ( MIP)-based monolithic capillary column was prepared by an in situ thermal-initiated polymerization process; the preparation process is simple and quick.

以4-氨基吡啶（4-AP）为印迹分子，热引发原位合成了分子印迹聚合物毛细管整体柱，聚合物通过共价键和石英毛细管内壁相连，制备方法简单、快捷。

ZnO/ polymer composite particles prepared by special polymerization process can improve the dispersibility of ZnO particles.

通过特殊的聚合工艺制备氧化锌/聚合物复合微粒材料，可改善氧化锌微粒的分散性，并且复合材料可综合无机和有机材料的优良特性。

The selection of fire retardant agent, performance analyzing of fire retardant and anti-static polyester chips, influence of polymerization temperature on polyester's tinct and viscosity, influence of adding time on polymerization process as well as chips drying and spinning process were further studied.

对阻燃剂的选择、阻燃-抗静电聚酯切片性能、聚合温度对聚酯色泽和黏度的影响、添加时机对聚合过程的影响及切片干燥和纺丝工艺进行了较深入的探讨。

Confronting with problems such as low bulk density of sPP and reactor fouling, it has been emphasized that the studies of reaction engineering focused on developing an optimal process for catalyst support and special polymerization process are very important.

强调要实现sPP的工业化，尚需从聚合反应工程的角度，加强催化剂负载和聚合工艺的研究。

The effects of reactor type, agitator type, and agitating speed on polymer morphology and polymerization process were studied.

研究了搅拌桨型式、反应器以及搅拌速度对聚合物形态以及聚合过程的影响，并分析了搅拌、结晶和聚合之间的关系。

A Development of the New Polymerization Process for XS& 5 PVC Resin

XS-5型PVC树脂聚合新工艺的开发

Study on production of insoluble sulphur by catalytic polymerization process

采用催化聚合法制取不溶性硫的研究

A model for styrene thermal polymerization process in tubular reactor has been developed starting from basic transport equation without adjustable parameters.

建立了管式层流反应器中苯乙烯本体热聚合过程的模型。

applications of dupont's pe products prepared with solution polymerization process

溶液法聚乙烯产品的应用