Cooling的例句大全

Using controlled rolling and controlled cooling process and changes of various process parameters improve the structure of plate, enhance strength, toughness and hardness of the plate so as to reach the target of comprehensive properties of the plate.

通过控制轧制控制冷却工艺，改变各项工艺参数，来改善钢板的组织结构，提高钢板的强韧性和硬度，从而达到提高钢板综合性能的目的。

The paper brings out policy suggestions on cooling storage air conditioning tariff system, efficiency standard and distributed energy on power network.

对限制室内外温差、建立蓄冷空调电价体系、制订常规空调能效等级标准和分布式能源电力上网等提出政策建议。

A pre_sedimentation, aerated flotation and V_shape filter process has been adopted to treat Taizhou thermal power plant wastewater and effluent has been used as make_up water of Industrial circulating cooling water system.

采用预沉淀、气浮、V型滤池过滤工艺对台州电厂四期综合废水进行了处理，处理后出水作为发电厂工业循环冷却水的补水。

A pre-sedimentation-aerated flotation-V filter process has been adopted in Taizhou Thermal Power Plant wastewater treatment and reuse engineering project, and the effluent has been used as make-up water to its circulating cooling system.

浙江台州电厂四期综合废水回用处理系统采用预沉淀、气浮、V型滤池过滤工艺，其出水补至电厂工业循环冷却水系统。

In the cooling effect of time and symptoms are better than western medicine group. 2, Weng Hua teabag on the wind-heat of the evil caused by sore throat, thirst symptoms better than the evil caused by the wet body weight of fatigue.

在退热时间及症状改善效果方面均优于西药对照组。2、翁花袋泡茶对风热之邪导致的咽痛、口渴症状改善效果优于湿邪导致的身重乏力症状。

A Technical Approach to the Use of Circulating Cooling Water for Plant Fire Water Supply

循环冷却水作工厂消防水源技术探讨

Study shows that the retrofitted direct air cooling system not only can satisfy the requirements in technical aspect, but also can produce remarkable economic benefits.

研究表明，经改进的直接空冷系统不仅可满足技术上的要求，而且能产生明显的经济效益，可用于300MW6、00MW空冷机组。

Application of Regional Cooling Technology and Technical Conditions

区域供冷技术的应用与技术条件

The technical design and flow process of air cooling system are briefly discussed.

简要叙述了技改后的高空台空气降温系统工艺方案和工艺流程；

The utility model needs to solve the technical problems of water drop removal generated by cooling temperature, spraying water and spraying fog, unit protection, efficiency improvement, etc.

要解决由于降温和喷水、雾产生的水滴任何去除，如何保护机组，提高效率等有关技术问题。

Building of technical economy model and optimization design of diesel locomotive cooling system

内燃机车冷却系统技术经济模型的建立及优化设计

Technical management of cooling liquid in internal combustion engine

内燃机冷却液的技术管理

New technical method of indoor air quality control desiccant wheel cooling

室内空气质量控制新技术&转轮除湿制冷

The processing of three phase control rolling and two phase control rolling and accelerating cooling after rolling are used respectively, and the two kinds of technical processing are analyzed and contrasted.

在试验中，分别采用三阶段控制轧制和二阶段控制轧制+轧后快冷技术，并对这两种工艺进行了分析与比较。

It is expected that the cooling water flow is re-circulated at a constant rate.

希望冷却水以恒定的速度循环。

Because of the foregoing the said system is expected to find application in an intermediate test plant to realize the continuous disposal and cooling of PFBC high-temperature boiler slag.

对大颗粒的适应性强.可望在中试装置上得到应用.以实现PFBC高温炉渣的连续排放和冷却。

This paper briefly describes a cold-state test plant of boiler slag disposal and cooling for a home-made PFBC-CC intermediate ted electric power station as well as its working principle and related operation ted conditions.

本文介绍了我国PFBC&CC中试电站的排渣冷渣冷态试验装置及其工作原理和运行试验的有关情况。

Applications show that by improving the parameters of water-curtain cooling system and roll parameters, the most deviation between measured final cooling temperature and the objective temperature is 19 ℃, the least deviation is 4 ℃ and the shape of test plate is eligible in the main.

应用表明，通过改进水幕冷却系统参数和冷却区辊道参数，实测终冷温度与目标终冷温度最大偏差为19℃，最小偏差为4℃，试验坯料板形基本合格。

Identification of Cooling Characteristics on a Test Probe Surface by Inverse Heat Conduction Problem

利用IHCP对淬火测试探头表面冷却特性辨识的研究

Identification of Cooling Characteristics in the Surface of a Test Probe by Solving an Inverse Problem

淬火测试探头表面冷却特性的反问题辨识