Piston的例句大全

It manly analyzes four kinds transmutations of piston effect 、 temperature effect 、 expansion effect 、 helical buckling effect in the system of tubing and packer.

针对油管柱&封隔器系统的活塞、螺弯、温度、鼓胀等四种基本效应进行分析，同时根据现场工艺特点进行了温度场和压力场的研究。

The operation performance of a spark ignition natural gas engine with two cylinders, including dynamometer card in cylinders, intake pressure liquid, air fuel ratio, temperature field of cylinder head and piston, and emission, is tested.

对一台火花点火式两缸天然气发动机进行了缸内示功图、进气压力波、空燃比、缸盖及活塞温度场和排放等项目的测试。

Temperature property computer simulation of ω combustion chamber diesel engine piston

ω型柴油机活塞温度特性计算机模拟

Stochastic Analysis of Temperature for Thermal Shock on Piston with Lumped Parameter Model

活塞热冲击集总参数模型的随机温度分析

The tribological performance of five kinds of piston rings when lubricated with GF-3 fully-formulated engine oil was investigated on a SRV high temperature friction and wear tester.

利用SRV高温摩擦磨损试验机模拟发动机运行态条件，考察了五种活塞环在GF-3全配方发动机油润滑下的摩擦学性能。

Besides, with several supposed diesel piston cases, it involves the examination of the speed of heat transfer and permeation and damping of temperature wave on the combustion-chamber surface of the internal combustion engine.

并以柴油机活塞为例，考察了在几种假定情况下，内燃机燃烧室壁面热传播的速度以及温度波的渗透和衰减情况。

Do a research of ten kinds of failure forms of a cold extruding punch terrace die for a smelting steeliness automobile piston.

采用疲劳强度设计理论和最优化设计理论相结合的方式探讨多层压配组合冷挤压凹模的更为合理、有效的设计方法。

Contrast test shows that, the tension failure life of the new rubber piston membrane is improved greatly, and all the performance indexes of the test piece are identical to the results of the ANSYS analysis.

新旧两种橡胶活塞膜试件的气压拉伸对比试验表明，新设计的橡胶活塞膜的拉伸破坏寿命大大提高，试件的各项性能指标与AN-SYS分析结果一致。

Through stamping technology test and batch yield, it is proved that the process can be applicable to piston pin manufacture;

通过冲连皮工艺试验及批量生产，证明采用冲连皮工艺能够应用于活塞销加工过程；

Simulating wear test for cylinder and piston ring friction pairs

缸套活塞环摩擦副的模拟磨损试验研究

The Wear Simulating Test of Cylinder and Piston Ring

内燃机汽缸套活塞环模拟磨损试验

The Rapid Wearability Test of Cylinder Liner and Piston Rings

气缸套&活塞环的台架快速磨损试验

It is very important to know the dynamic distance between crankshaft neck and top surface of cylinder on assembly line of diesel engine. The purpose to test this dynamic distance is that relevant piston rod part can be chosen for assembly based on test results.

检测曲轴连杆颈到缸体顶面的动态距离的目的，是使相应的活塞连杆组件可根据检测结果被选择装配。

Piston and connecting rods are crack tested in accordance with test equipment instructions.

根据监测设备要求对活塞与连杆作裂缝检测。

Development of Assembled Piston The Piston of the Heavy Fuel Diesel Engine

重油柴油机活塞组合式结晶器的改进

Sideway Fine Feed System for Finishing Piston Ring Groove

精切活塞环槽侧向微进给系统设计

The Study of Dynamic Behavior and Dynamic Modification of the CNC Lathe for OC Curved Surface Piston

OC曲面活塞数控加工系统动态特性研究及动力修改

Barrel Type Variable Oval Piston Skirt Processing Technology and the Innovation of Equipment

中凸变椭圆活塞裙部加工工艺及设备改造

Thermodynamic System Analysis of Friction between Piston Ring and Cylinder

内燃机活塞环&缸套摩擦热力学系统的分析

The paper describes the structure, working principle, technical data and functions of the piston ring radial thickness grader.

介绍了一种活塞环径向厚度分选机的结构、工作原理、技术参数及功能特点。