Plate的例句大全

The most commonly used methods of surface shape detection are test plate method and interferometer method.

常用于镜片面形检测的方法有：样板法和干涉仪法。

Study on application of Staphylococcus aureus test plate

金黄色葡萄球菌测试片的检测性能研究

Manufacturing engineering of photoelastic models of vessel connecting pipe simulated test plate

容器接管模拟试板光弹性模型的制作工艺

Analysis and repair of crack in surface layer of surfacing test plate of hydrogenation heat-exchanger

加氢换热器堆焊试板表层裂纹的分析与处理

The analysis of physical mechanics about the necking and fracture in tensile test plate of low carbon steel

低碳钢拉伸试件的颈缩与断口的物理力学分析

C-reactive protein and C-reactive protein test plate

C反应蛋白及其检测板

The influence of heat capacity of the electric heater on the transient temperature distribution in the test plate is discussed.

讨论了电加热器热容量对平板试材温度分布的影响。

Improved APAAP Immunocytochemical Staining-Trace Cytotoxicity Test Plate Method for Detection of Cell Surface Antigens

改良碱性磷酸酶-抗碱性磷酸酶桥联酶染色微板法检测细胞表面抗原

Research on Special-shape Test Plate Imitating Fatigue Crack Propagation in High Strain Region in Nozzle-to-Cyclinder

异型试板模拟压力容器接管高应变区疲劳扩展规律的试验研究

This paper produces designing and manufactruing engineering of vessel connecting pipe simulated test plate and the heteromorphic plate hole crack.

本文介绍了容器接管模拟试板的光弹性模型的设计与制作工艺。

Verification shall be provided using a welding procedure qualification ( general) as well as one production weld test plate from an identical heat for each welding procedure ( specific) utilised.

通过焊接工艺评定（一般）以及对每个焊接程序经受同样受热的一块产品焊接试板（特殊）来进行确认。

The heat transfer in the stagnation zone differs from the one in the additional stagnation zone, and the most unfavorable heat transfer is located in the center of the test plate.

研究结果表明，实验条件下，喷嘴组空气射流局部Na数呈对称分布，在附加驻点区换热与驻点区有所不同，被冲击表面中心处的换热处于最不利的位置。

Test plate method belongs to contact-type detection, is easy to cause secondary damage of the surface shape. Interferometer method belongs to non-contact, but it usually detects single-chip and costly.

样板法属于接触性检验，容易对面形造成二次损伤；干涉仪法属于非接触法，但干涉仪造价昂贵，而且通常只能对单个镜片进行检验。

Test plate of Fe 6 5% Si alloy is prepared by directional solidification, which is studied by optical microscope observation, X ray diffraction analysis, EBSD investigation and magnetic determination.

采用定向凝固方法制备了Fe65%Si实验合金板，并进行了金相观察、X射线衍射分析、EBSD分析和磁性测定。

It proved the Staphylococcus aureus golden marked specificity monoclonal antibody test plate is a kind of fast, convenient and veracious examination product through the research. It is worth to popularize in raw milk market.

通过本研究确定金黄色葡萄球菌金标特异性单克隆抗体快速检测试板是一种快速、简便、准确的检测产品，值得在原料奶市场大力推广。

M1 multi-functional test plate for magnetic particle inspection is a new type of test plate with three artificial defects of concentric circles. The test plate is 50 μ m thick with slots of 7.15 and 30 μ m in depth respectively.

磁粉探伤用M1型多功能试片是一种具有三个深度各异而间隔相等的同心圆形人工缺陷槽的新型试片，片厚为50μm，槽深分别为7,15和30μm。

It is also found that the test plate processes strong cubic texture and exhibits soft magnetic properties with a coercive force of 3.45A/ m, which is lower than those of the Fe 6.5% Si alloys prepared by other method.

合金板具有强的立方织构并显示出优良的软磁性能，其矫顽力只有345A/m，小于其他方法制备的Fe65%Si合金。

Applications show that by improving the parameters of water-curtain cooling system and roll parameters, the most deviation between measured final cooling temperature and the objective temperature is 19 ℃, the least deviation is 4 ℃ and the shape of test plate is eligible in the main.

应用表明，通过改进水幕冷却系统参数和冷却区辊道参数，实测终冷温度与目标终冷温度最大偏差为19℃，最小偏差为4℃，试验坯料板形基本合格。

Guard plate of fabric guarded hot-plate is not only to ensure that the temperature between the guard plates and test plate equal, preventing horizontal heat transfer from test plate, it can also replenish heat loss of the surface of test plate to form a dynamic equilibrium.

同时织物平板仪的护板的作用不仅仅是保证护板与试验板之间的温度相等，防止试验板的热量水平传递，还可以补充试验板上表面的热量散失，形成动态平衡。

Analysis and Test of Plate with a Crack under Vibration Loading

动力学环境下含裂纹板力学性能分析与试验