Surfaces的例句大全

In the developed method, all singularities were extracted and calculated in closed form. Secondly, in order to analysis Frequency Selective Surfaces ( FSS) which is loaded by dielectric, finite element tearing and interconnecting method and parallel multilevel fast multipole approach are adopted.

其次，为了分析含有介质加载的频率选择表面，有限元部分采用有限元撕裂对接法，边界积分部分采用并行快速多极子技术。

It has been summarized the technical classification for the super smooth surfaces, their strengths and weaknesses, the technical and development status, respectively.

总结了国内外对超光滑表面加工的技术分类和各自优缺点、发展现状。

Micro-analysis on test ring worn surface indicated that, to the composite reinforced by plain carbon fabric, the gap between the carbon fibers and texture provided by the plain fabric caused the oil infiltrate to the friction surface, improving the lubrication effect between the sliding surfaces.

试环磨损表面微观分析表明，平纹织物增强的复合材料，碳纤维之间的间隙及平织物形成的表面纹理使得润滑油能深入到摩擦试环各区域，增强了滑动面流体润滑效果。

In this paper, the testing set for near-cylindrical surfaces is simulated by computer.

采用计算机仿真技术模拟了近柱非球面的正入射式检测装置。

As the results, the difference in the graphitization degree of the carbon fibers in the sub worn surface and the matrix becomes indistinctive on the worn surfaces after 10 time simulated braking testing, the size of the microcrystalline graphite along axial a becomes uniform as well.

结果表明，经过10次模拟飞机正常着陆刹车试验后，相对于石墨化程度各异的磨损次表层炭纤维及基体碳，磨损表面各处的石墨化程度及石墨微晶在a轴方向的尺寸La趋于均匀。

Effects of radiation heat transfer among wall surfaces on indoor thermal environment

壁面间辐射换热对室内热环境的影响

Study on Calculation Method of Non-interference Cutter Pass for Complex Surfaces with NC Machining;

针对复杂曲面通常采用数控加工方式制造，从复杂曲面的数学模型入手。

The surfaces are a strange mix of smooth and unaltered stone and ice, as when a master sculptor works in stone and lets the material's natural texture add depth and beauty.

建筑的表面是由天然冰石以一种奇怪的方式混合而成的光滑材质，就像一个雕刻大师在雕琢石头时，让它本身的纹理表现得更深刻更美丽。

Family of bacteria living usually in the alimentary canal or on mucous surfaces of warm-blooded animals; sometimes associated with acute infective processes.

通常生活于消化道或暖血动物粘液表面的细菌科；有时与急性传染过程有关。

The contaminant transport in the calculation model between the surfaces is divided into visual and non-visual transport.

分子传输计算模型将污染分子在物面间的传输过程分为可视传输和非可视传输两种方式。

Finally, we used QDs solution to detect latent fingerprints on non-porous surfaces. 2.

最后采用量子点溶液法对非渗透性客体表面的潜在指纹进行了显现。

Controlled by the cycle of tectonization and palaeoclimate in Palaeogene, there are five unconformity ( or parallel unconformity) surfaces, four covering sequence structures and rift basin deposition that lithofacies and lithology often vary.

受老第三纪构造旋回与古气候旋回控制，在沉积建造上形成了5个不整合或假整合界面和4套层序叠覆的层序结构，以及富于岩相岩性变化的断陷湖盆沉积。

Permanent magnetism direct current generator without brush drives the reflector with ten surfaces to line scanning, and the stepper motor drives single reflector to achieve television video field scanning.

永磁无刷直流电机驱动等10面体旋转反射镜实现电视图像的行扫描，步进电机驱动单面反射镜实现电视图像的场扫描。

In order to release the stresses originated from the lattice mismatch and reduce the defect densities, sapphire substrate surfaces are preprocessed by H-plasma cleaning, N-plasma nitriding and the low temperature buffer growth.

为了释放因晶格失配产生的应力，以降低在GaN外延膜中引起的缺陷密度，我们对蓝宝石衬底采用了氢等离子体清洗、氮等离子体氮化以及低温生长缓冲层的方法。

Applying Infrared Double-wave Temperature Indicator to The Continuously Cast Slab Surfaces ′ Temperatures Indicating

红外双色测温仪在连铸坯表面测温中的应用

This article elaborates the principle of infrared temperature indicating and the fact of applying infrared double-wave temperature indicator to the continuously cast slab surfaces'temperatures indicating.

本文阐述了红外测温原理及红外双色测温仪在连铸板坯表面温度测定中的应用。

At vacuum and above mentioned temperature, a firm joint can be formed between ceramic and metal by a active liquid phase alloy formed on copper surfaces to wet ceramic.

在真空、温度的作用下，陶瓷与金属之间藉助于铜表面本身形成的液相活性合金，润湿陶瓷而获得牢固的连接。

Abrasion wear test of Fe-20% Cr ahoy with carbon content ranging from 0.82% to 2.94% was conducted at 800 ℃ in a self-made high temperature wear tester. The worn surfaces and subsurfaces were observed by SEM.

本文用自制的高温磨损试验机对碳含量0.82～2.94%的Fe-20%Cr合金进行了800℃下的高温磨损试验，并用扫描电镜观察了磨损面和磨损面亚表面的情况。

The results show that the theoretical and experimental critical surfaces of the maximum tensile strain are very close.

结果表明，按最大拉应变理论所得到的理论临界曲面和试验临界曲面相当接近。

When the top surface of the melt is free surface, two roll cells with opposite direction are observed in the melt driven by both the surface tension gradient on the two free surfaces.

当熔体顶部为自由表面时，由于上下自由表面张力的作用，在熔体内部会形成两个流动方向相反的流胞。